• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.172-179
• /
• 2013

Impact modifier reinforced polymers are frequently used. In this study, Izod impact test has been simulated to analyze the mechanism of impact reinforcement of Nylon6 which contains impact modifier. The modeling of rubber particles added to Nylon6 as an impact modifier has been attempted. Based on the modeling, simulation of Izod impact test has been performed to observe the distribution and direction of stress at the cross-section of impact specimen. Three computer simulation models for Nylon6 were investigated. Those were without impact modifier, containing impact modifier without surface treatment, and containing impact modifier with surface treatment in the Nylon6. Simulation results showed that the stress which originated at the notch surface propergated to the inside of specimen round a impact modifier. In addition to that, impact modifier reinforced Nylon6 specimen showed low stress ditribution in the cross-section specially at notch surface. Principal stress in perpendicular direction to crack was also lowered in impact modifier reinforced Nylon6. These enhanced impact resistance reduced and crack propergations. Through this study it was realized that the computer simulation can be utilized to investigate the property enhacement of composite materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.305-311
• /
• 1993

Marine organisms were investigated to identify the marine actinomycetes that produced noble bioactive compounds. Microorganism counts range from $2.1{\times}10^3\;to\;1.2{\times}10\;CFU/g$ of marine organisms. Actinomycetes constituted 0.01 to $0.5\%$ of culturable microbial community. We identified the marine actinomycetes that produced novel bioactive compounds. During the course of screening for bioactives from the marine microorganisms, we found that the strain in sponge had antimicrobial activities. From the morphological, cultural and various physiological characteristics, this strain was identified for Actinomycetes No. 101. The optimal compositions of culture medium for Actinomycetes No. 101 were starch 30g/l as carbon source, casamino acid 10g/l as nitrogen source. The optimal pH of medium and fermentation temperature were $6.5{\sim}7.0$ and $30^{\circ}C$, respectively. Fermentation has been conducted in the marine broth at $30^{\circ}C$ for 72 hour. The yield of fermentation got about 3g as dry weight(per liter of broth). The distribution of antimicrobial activity of Actinomycetes No. 101 was screened by paper disc. The extract of cultured cell and broth inhibited the growth of Staphylococcus aureus and Bacillus subtilis, but the inhibition action was week against yeast and mold.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2005

Sphene U-Pb ages were determined for the granodiorites from Gimcheon, Seongju and Anui areas of the middle Yeongnam massif. The determined ages were in the narrow range of 195.7±2.4∼200.8±1.9(2σ) Ma that are approximately coincident with the boundary between Triassic and Jurassic. Even though the studed plutons are aerially separated, they reveal quite similar major element compositions and almost identical ages, suggesting that they were generated from the similar source materials under the identical tectonic environment and thus they can be considered to form a single suite. Considering the age and spatial distribution of the Triassic to Lower Jurassic plutons of the Yeongnam Massif and Okcheon Belt, it seems that there were episodic changes in tectonic environment in both areas with relatively short intervals. In general, the compressive environment of active continental margin was prevailed. However, the tensional environment of within-plate was also appeared several times intermittently. In conclusion, Yeongnam Massif and Okcheon Belt experienced distinct tectonic environments during Triassic to Lower Jurassic, providing important clue to reveal the crustal evolution of the Korean Peninsula.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.556-561
• /
• 2008

This study was carried out to identify the cause of benzo(a)pyrene[B(a)P] production during the manufacture of sesame oil and perilla oil, and to minimize such B(a)P synthesis. The distribution of B(a)P in sesame seed and perilla seed differed with seed-growing district, the range was $0.06{\sim}0.31{\mu}g/kg$ in domestic seed and $0.12{\sim}0.47{\mu}g/kg$ in imported seed. B(a)P contents after roasting at $220^{\circ}C$ for 20 min in sesame seed and perilla seed were $1.87{\sim}2.47{\mu}g/kg$ and $2.12{\sim}2.43{\mu}g/kg$, respectively, and levels in oils obtained from the roasted seeds were $3.68{\mu}g/kg$ and $4.64{\mu}g/kg$, respectively. These data refer to seeds subjected to codsed roasting. With open roasting, the levels were $0.63{\mu}g/kg$ and $0.56{\mu}g/kg$, respectively. Closed roasting resulted in absorption of B(a)P, with consequent high levels in oils. We introduced forced ventilation during closed roasting. We tested various methods to remove B(a)P from sesame oil and perilla oil. Neither centrifugation nor filtering with diatomite and diatomiteactive carbon removed B(a)P. A filtering method using active carbon was effective. But this method adversely affected the color and flavor of sesame oil and perilla oil.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.640-644
• /
• 2014

As a process of plat panel display production, slot coating is widely used for the coating of photoresist on a wide glass substrate. A uniform coating thickness is important, and the coating uniformity is divided into nozzle and machine directions. The machine and nozzle directions coating uniformities are influenced by the operation condition of coater and flow uniformity inside the die, respectively. Non-uniform coating during steady coating process occurs according to those factors, however, non-uniform coating along the machine and nozzle directions has been observed at the beginning of coating by unsteady flow. In this study, steady and unsteady state flow simulations have been performed and compared with experiment to examine the causes of non-uniform coating. Computational results exhibited that it took a time to get a uniform pressure distribution at whole inside the die, and during this period of time edge regions showed lower exit velocity compared with center region. Subsequently edge regions had thinner coated layers than center region. However edge regions showed higher exit velocity than center region after steady state, and this made edge regions had thicker coated layer than center region.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.646-655
• /
• 2015

A phytosociological survey carried out using the Z.-M. School’s methodology and system of numerical-classification analyses, this study sought to classify the syntaxa of forest vegetation on Mt. Byeokbang and to collect basic data on the transitional zones of the southern Korean peninsula’s coastal region. The syntaxa were classified into three physiognomic types and nine communities, including (1) evergreen coniferous forests (Eurya japonica-Pinus thunbergii community and Ardisia japonica-Pinus densiflora community), (2) summer-green, broad-leaved forests (Chloranthus japonicus-Quercus serrate community, Syneilesis palmata-Quercus mongolica community, Quercus acutissima community, Carpinus turczaninovii var. coreana community, Fraxinus siebolidiana-Quercus dentate community, and Deutzia glabrata-Lindera erythrocarpa community), and (3) artificial afforestation (Alnus firma afforestation). The Chloranthus japonicus-Quercus serrata community, Syneilesis palmata-Quercus mongolica community, Fraxinus siebolidiana-Quercus dentata community, Carpinus turczaninovii var. coreana, community and Deutzia glabrata-Lindera erythrocarpa community were closely evaluated for national vegetation naturalness. It was confirmed that the Carpinus turczaninovii var. coreana community was endemic to Korea. Most syntaxa were defined as a secondary forestation due to various human activities (e.g., forest fires, logging, digging, climbing, etc.). The results of a canonical-correspondence analysis (CCA) showed that human activities, altitude, humus depth, rock cover ratio, slope, etc. were the main ecological factors determining the classified plant communities’ distribution patterns.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.113-124
• /
• 2014

The observed rainfall may be different along with the altitude of rain gauge, resulting in the fact that the characteristics of rainfall events occurred in urban or mountainous areas are different. Due to the mountainous effects, in higher altitude, the uncertainty involved in the rainfall observation gets higher so that the density of rain gauges should be more dense. Basically, a methodology for the rain gauge network evaluation, considering this altitude effect of rain gauges can account for the mountainous effects and becomes an important step for forecasting flash flood and calibrating of the radar rainfall. For this reason, in this study, we suggest a methodology for rain gauge network evaluation with consideration of the rain gauge's altitude. To explore the density of rain gauges at each level of altitude, the Equal-Altitude-Ratio of the density of rain gauges, which is based on the fixed amount of elevation and the Equal-Area-Ratio of the density of rain gauges, which is based on the fixed amount of basin area are designed. After these two methods are applied to a real watershed, it is found that the Equal-Area-Ratio generates better results for evaluation of a rain gauge network with consideration of rain gauge's altitude than the Equal-Altitude-Ratio does. In addition, for comparison between the soundness of rain gauge networks in other watersheds, the Coefficient of Variation (CV) of the rain gauge density by the Equal-Area-Ratio is served as the index for the evenness of the distribution of the rain gauge's altitude. The suggested method is applied to the five large watersheds in Korea and it is found that rain gauges installed in a watershed having less value of the CV shows more evenly distributed than the ones in a watershed having higher value of the CV.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.355-362
• /
• 2014

Changes of soil properties due to sedimentation and erosion in the river estuary may lead changes in environmental factors that affect plant growth and distribution, Then habitats in the river estuary that provide various ecological functions can also be influenced. Topsoil samples were analyzed in order to understand the soil properties of important barrier islands and habitat types in the Nakdong river estuary. The samples were obtained from Phragmites communis and Scirpus planiculmis habitats, the tidal flats in the southern area of Eulsukdo, and in Mangeummerydeung, Baekhapdeung, and Doyodeung. Analyses results showed that bulk density, pH, organic matter content and total nitrogen concentration which were directly or indirectly affected by vegetation showed significant difference (p<0.05) with habitat types but no differences in water content and oxidation reduction potential which could be affected by soil texture and showed significant difference among barrier islands. Results suggested that soil properties on barrier islands in the Nakdong river estuary were influenced first by geomorphic changes due to sedimentation and erosion, and then by the presence or type of vegetation. A range of physical and chemical properties were analyzed; soil water content and bulk density (physical properties), and organic content and pH (chemical properties) were correlated with seven other soil properties, at a level of significance higher than 90%. These aspects played an important role in determining overall soil properties in the studied area.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.119-127
• /
• 2013

Borosilicate glass dissolution is an important chemical process that impacts the glass durability as nuclear waste form that may be used for high-level radioactive waste disposal. Experiments reported that the glass dissolution rates are strongly dependent on the bulk composition. Because some relationship exists between glass composition and molecular-structure distribution (e.g., non-bridging oxygen content of $SiO_4$ unit and averaged coordination number of B), the composition-dependent dissolution rates are attributed to the bulk structural changes corresponding to the compositional variation. We examined Na borosilicate glass structures by performing classical molecular dynamics (MD) simulations for four different chemical compositions ($xNa_2O{\cdot}B_2O_3{\cdot}ySiO_2$). Our MD simulations demonstrate that glass surfaces have significantly different chemical compositions and structures from the bulk glasses. Because glass surfaces forming an interface with solution are most likely the first dissolution-reaction occurring areas, the current MD result simply that composition-dependent glass dissolution behaviors should be understood by surface structural change upon the chemical composition change.

• The Journal of Korean Medicine
• /
• v.19 no.2
• /
• pp.194-210
• /
• 1998

The main purpose of this work is the study on the etiology and pathology of the anorexia in oriental and western medicine. An appetite is stimulated by the need of supply of nutrition for life and the physical desire of hunger which appeared as the alternative of taste. In this paper, I investigated the anatomical and the physiological function system, the Piwei functional system and meridian distribution, and the differentiation of the disease according to the Zangfu(internal organs) in association with the anorexia. And conclusion could be summarized as follows : 1. The tongue, one of the Piwei functional system(脾胃機能系), is connected with Pi(脾), Xin(心), Gan(肝) and Shen(腎) meridian. Especially Pi and Xin meridian have the close relations with taste. 2. The appetite has the close relations with Piwei. The appetite and digestion is influenced by the function of smoothing and regulating and bloodflow of Ki(肝主疏泄), warming the Shen to activate the function of Pi(腎主溫養), cleansing the inspired air and keeping the Ki flowing downward(肺主肅降). 3. The cause of anorexia is the insufficiency of Ki of Piwei(脾胃氣虛), the attack of Wei by hyperactive Gan Ki(脾氣犯胃), the insufficiency of Wei Yin(胃陰不足), the declination of the fire from the vital gate(命門火衰) and the retention or stagnancy of undigested food (飮食停滯). Especially, the main cause of anorexia is the insufficiency of Ki of the Piwei(脾胃氣虛). 4. Recently the attack of Wei by hyperactive Gan Ki(脾氣犯胃) is raised by the main cause of anorexia. 5. The mental function of anorexia, which is induced by the unbalance of Pi, is directly associated with Xin(心) and Xin meridia(心經). 6. The goal of the treatment of the anorexia is dependent on the recovery of the weakness of the Pi. And for this goal, the disorders of the other organs is also treated. 7. In the point of the anatomy and physiology, the main cause of anorexia is the loss of function of the autonomic nerve system and the vagus nerve.