• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.221-244
• /
• 2014

We suggested several implications by examining geochemical properties of sediments in Simjeok, Jangdo, and Hwaeomneup mountain wetlands which are natural preservation areas. Geochemical properties of wetland sediments show that all wetlands were included in the type of fens, but their distribution patterns were different from one another. We classified three sub-groups of sediments using the two step cluster analysis on the ratio of exchangeable cations. Wetland sediments can be grouped into Ca-dominated, Mg-dominated, and K-dominated types. Simjeok wetland have Ca-dominated sediments, while the sediments of Jangdo wetland indicate the Mg-dominated and Ca-dominated characteristics. Hwaeomneup wetland is composed of K-dominated sediment mainly. Different properties in the ratio are affected by various environmental factors such as geological, pedological, and vegetational settings. Because these geochemical properties will be affected by climate change and human impacts, these will be environmental indicator in mountain wetlands and be used in wetland management. This scheme can be used for classification of mountain wetlands. Therefore, we should work on geochemical properties of wetland sediments and classification schemes based on geochemical properties not only to widen understanding in geomorphic system or ecosystem of mountain wetlands but to conserve mountain wetlands properly.

• Journal of the Korean earth science society
• /
• v.33 no.1
• /
• pp.39-48
• /
• 2012

In this study, a statistical estimation of probable precipitation and an analysis of its return period in Busan were performed using long-term precipitation data (1973-2007) collected from the Busan Regional Meteorological Administration. These analyses were based on the method of probability weighted moments for parameter estimation, the goodness-of-fit test of chi-square ($x^2$) and the probability plot correlation coefficient (PPCC), and the generalized logistics (GLO) for optimum probability distribution. Moreover, the spatial distributions with the determination of probable precipitation were also investigated using precipitation data observed at 15 Automatic Weather Stations (AWS) in the target area. The return periods for the probable precipitation of 245.2 and 280.6 mm/6 hr with GLO distributions in Busan were estimated to be about 100 and 200 years, respectively. In addition, the high probable precipitation for 1-, 3-, 6-, and 12-hour durations was mostly distributed around Dongrae-gu site, all coastal sites in Busan, Busanjin and Yangsan sites, and the southeastern coastal and Ungsang sites, respectively.

• Journal of the Korean earth science society
• /
• v.41 no.3
• /
• pp.238-247
• /
• 2020

This study simulated strong ground motion waveforms in the southern Korean Peninsula, based on the physical earthquake modeling of the Southern California Earthquake Center (SCEC) BroadBand Platform (BBP). Characteristics of intensity attenuation were investigated for M 6.0-7.0 events, incorporating the site effects. The SCEC BBP is software generates broadband (0-10 Hz) ground-motion waveforms for earthquake scenarios. Among five available modeling methods in the v16.5 platform, we used the Song Model. Approximately 50 earthquake scenarios each were simulated for M 6.0, 6.5, and 7.0 events. Representative metrics such as peak ground acceleration (PGA) and peak ground velocity (PGV) were obtained from the synthetic waveforms that were simulated before and after the consideration of site effects (V_S30). They were then empirically converted to distribution of instrumental intensity. The intensity that considers the site effects is amplified at low rather than high V_S30 zones.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.437-445
• /
• 2013

This study was conducted to develop site index equations and to estimate productive areas of Quercus acutissima by ecoprovince in Korea using environmental factors. Using the large data set from both a digital forest site map and a climatic map, a total of 48 environmental factors including 19 climatic variables were regressed on site index to develop site index equations. Four to six environmental factors for Quercus acutissima by ecoprovince were selected as independent variables in the final site index equations. The result showed that the coefficients of determination for site index equations were ranged from 0.30 to 0.41, which seem to be relatively low but good enough for the estimation of forest stand productivity. The site index equations developed in this study were also verified by three evaluation statistics such as the estimation bias of model, precision of model, and mean square error of measurement. According to the evaluation statistics, it was found that the site index equations fitted well to the test data sets with relatively low bias and variation. As a result, it was concluded that the site index equations were well capable of estimating site quality. Based on the site index equations of Quercus acutissima by ecoprovince, the productive areas by ecoprovince were estimated by applying GIS technique to the digital forest site map and climate map. In addition, the distribution of productive areas by ecoprovince was illustrated by using GIS technique.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.330-339
• /
• 2008

Effect of additives such as NP series nonionic surfactant and cosurfactant on AgCl nanoparticles was investigated where nanoparticles were prepared using two different types of water-in-oil (W/O) microemulsions containing silver nitrate and sodium chloride, respectively. Phase behavior experiments showed that the region of one phase W/O microemulsion was found to be broadened with an increase in the ethylene oxide length of a nonionic surfactant mainly due to an increase in hydrophilic nature of a surfactant. Photomicrographs obtained by transmission electron microscopy indicated that an increase in ethylene oxide length of a nonionic surfactant results in both increases in particle size and size distribution. Phase behavior experiments for the systems containing AOT surfactant, isooctane and aqueous solution of an inorganic salt showed that addition of a cosurfactant caused a shrinkage in phase region of one phase W/O microemulsion, especially water contents contained in W/O microemulsion with an increase in the chain length or the concentration of a cosurfactant used. Photomicrographs obtained by transmission electron microscopy indicated that characteristics of AgCl nanoparticles produced were dependent both on the radius of spontaneous curvature and film rigidity of a microemulsion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.226-241
• /
• 2000

Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estonia(Kuraray Co.. Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer's instructions, rectangular tensile test specimens measuring $1.5{\times}2.0{\times}4.5mm$ were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at $25^{\circ}C$ for 10 days, and another group was subjected to thermal cycling($10,000{\times}$) in water($5/55^{\circ}C$). All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey's test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn: 1. Both in drying condition and thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were at to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05) 4. The aliphatic C=C absorbance peak of Estonia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.4
• /
• pp.708-720
• /
• 2012

The main aim of paper is to analyse relationships of objects, methods and main agents for the sustainable growth of community business (CB). Since the 1990s, Korea central-local governments have carried out a variety of policies to revitalize the rural economy, but many policies did not work effectively. The main reason for this is that those policies were simply focused on construct the hardware-based infrastructure without considerations of community capabilities. Recently, to overcome these problems, various kinds of community business policies are carried out across the country. Therefore, to avoid previous problems, the concrete and thorough analysis on the current CB has to be required. To do this analysis, four case studies on Sungmisan Village (in Mapo-Gu, Seoul) were taken and analysed in this paper. Results for this are as follows; Firstly, for the sustained growth of CB, it has to be required that the needs and demands of communities and residents are reflected. In the case of Sungmisan CB, residents were relatively satisfied with their community products, even though tastes and prices of those products were not very attractive. The reason for this is that those products were created by needs of local people. In this process, a market within the village was created and the basis of the management was established. Secondly, in order to secure a stable profit's structure that is necessary at the early stage of business settlement, creating related networks with Sungmisan CB is necessary. The CB established a stable profit structure by using mutual commodities. In particular, they linked closely and mutually so that visitors can buy their commodities. Lastly, for the sustainable management of the CB a common target local people should be set up. Furthermore, a system for income distribution has to be needed for protecting and solving potential conflicts.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.26-41
• /
• 2017

The purpose of this study was to classify parks by type and to propose management plans for each park type. Environmental characteristics of urban parks in Daegu Metropolitan City were used to classify them into five categories. A total of 68 neighborhood parks were classified using their internal/external environmental factors, with a resulting distribution of 41 parks classified as 'FFR-type parks,' 12 as 'HNR-type parks,' 6 as FFCI-type parks,' 3 as FFA-type parks,' and 6 as 'HNA-type parks.' In the analysis of ecological and usage characteristics for the neighborhood park types, FFR-type parks had excellent park accessibility and the highest population density within the park service area. HNR-type parks had high NDVI from their natural green spaces, but their accessibility was low. FFCI-type parks had very low NDVI and green space connectivity, and also had low park accessibility and population density. FFA-type parks had low NDVI and green space connectivity, and very poor accessibility. HNA-type parks had high NDVI and green space connectivity. These findings provide an effective base dataset for use in preparing long-term plans for remodeling and managing urban neighborhood parks.

• Journal of the Korean Geographical Society
• /
• v.51 no.1
• /
• pp.167-184
• /
• 2016

This paper investigates the migration process of Korean population in Northeastern China since the 19th century, focusing on the population distribution patterns in different time periods which reflect changes and diffusions of diaspora space. Korean migration into Northeastern China seemed to begin from the late 19th century, and can be classified into four different periods including cross-border refugee period (19th to 1910), political exile period(1911-1931), forced migration period(1932-1945), and economic-driven migration period(after 1946). The Korean migration into Northeastern China was closely related to paddy field rice farming by Korean migrants, which can be interpreted as a process of contagious diffusion starting from border area between Korea and China at the early stage. And then, process of hierarchical diffusion occurred along with urban centers on the railways from the 1930s. At the later stage, Korean migration has extended to coastal urban centers, other big cities in China and other countries including Korea since the 2000s. Recently, ethnic Korean communities in China have experienced changes from rural village based community to urban district based community as well as from single-nuclei ethnic structure around Northeastern China toward multi-nuclei ethnic structure extending to coastal urban areas in China.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.136-143
• /
• 2013

In this study, both transient behaviors of a biofilter system with improved design and a conventional biofilter were observed to perform the treatment of waste air containing malodor and volatile organic compound (VOC). Their behaviors of removal efficiency and treated concentration of malodor and VOC were compared each other. During 1st~7th stages of improved biofilter system operation it was observed that the order of treated ethanol concentration at each sampling port was switched due to the difference of microbe-population-distribution in spite of the difference of biofilter effective height. However, at 8th stage of its operation, the order of treated ethanol concentration at each sampling port was consistent to the order of biofilter effective height at each sampling port. The same was applied to the case of hydrogen sulfide, even though the difference of switched treated-hydrogen sulfide-concentrations was less than that of switched treated-ethanol-concentrations. The ethanol-removal efficiency of the biofilter system with improved design was ca. 96%, which was greater by 2% than that of the conventional biofilter. The transient behavior of treated hydrogen sulfide concentration of both biofilters were similar to each other. However, the concentration of hydrogen sulfide treated by the biofilter system with improved design was observed lower than that by the conventional biofilter. The hydrogen sulfide-removal efficiency of the biofilter system with improved design was higher by ca. 2% than that of the conventional biofilter. Therefore, the hydrogen sulfide-removal efficiency of the biofilter system with improved design was observed to be enhanced by the same as its ethanol-removal efficiency.