• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.235-240
• /
• 2009

Simulation method based on probability was developed to evaluate the durability of reinforced concrete structures about chloride attack. The effects of the probability parameters(surface chloride ion concentration, initial combined chloride ion concentration, the depth of cover thickness of concrete, and the chloride ion diffusion coefficient), probability distribution function and it's variation were calculated using the Monte Carlo method and Fick's 2nd law. From the durability design method proposed in this study, the following results were obtained. 1) The effects of the distance from the coast and the chloride ion diffusion coefficient to the corrosion probability were quite high. 2) The effect of the variation of each parameters was relatively low.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2183-2188
• /
• 2014

This paper has analyzed threshold voltage movement for channel doping concentration of asymmetric double gate(DG) MOSFET. The asymmetric DGMOSFET is generally fabricated with low doping channel and fully depleted under operation. Since impurity scattering is lessened, asymmetric DGMOSFET has the adventage that high speed operation is possible. The threshold voltage movement, one of short channel effects necessarily occurred in fine devices, is investigated for the change of channel doping concentration in asymmetric DGMOSFET. The analytical potential distribution of series form is derived from Possion's equation to obtain threshold voltage. The movement of threshold voltage is investigated for channel doping concentration with parameters of channel length, channel thickness, oxide thickness, and doping profiles. As a result, threshold voltage increases with increase of doping concentration, and that decreases with decrease of channel length. Threshold voltage increases with decrease of channel thickness and bottom gate voltage. Lastly threshold voltage increases with decrease of oxide thickness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.657-662
• /
• 2014

This paper has analyzed the subthreshold swings for top and bottom gate voltages of asymmetric double gate(DG) MOSFET. The asymmetric DGMOSFET is four terminal device to be able to separately bias for top and bottom gates. The subthreshold swing, therefore, has to be analyze not only for top gate voltage, but also for bottom gate voltage. In the pursuit of this purpose, Poisson equation has been solved to obtain the analytical solution of potential distribution with Gaussian function, and the subthreshold swing model has been presented. As a result to observe the subthreshold swings for the change of top and bottom gate voltage using this subthreshold swing model, we know the subthreshold swings are greatly changed for gate voltages. Especially we know the conduction path has been changed for top and bottom gate voltage and this is expected to greatly influence on subthreshold swings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2664-2669
• /
• 2014

Recently, many research efforts have paid attention to spectrum pooling meshanism that provides efficient way to manage transient spectrum requests of secondary users in cognitive radio networks. Spectrum pooling is maintained by WSP (wireless service provider). WSP leases the spectrums stored in her spectrum pool to secondary users with being paid for it. It is natural that WSP tries to get profits as much as possible, which implies the WSP tries to minimize the cost required for maintaining her spectrum pool. In this paper, we model the spectrum pool into a probabilistic inventory model. Assuming secondary users' spectrum requests follow normal distribution, we give a strategic way that minimizes the maintenance cost of the spectrum pool. By a series of simulations, we show that WSP can reduce the total maintenance cost through our inventory model-based spectrum pooling than maintaining fixed inventory level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.572-584
• /
• 2016

The aim of this study was to identify the female nurses' perception of the types and characteristics of male nurses using Q-methodology, which can explore human subjectivity. The 35 selected Q-statements from each of 35 subjects were classified into a normal distribution using a 9 point scale. The collected data was analyzed using the PC-QUANL program. Principal Component Analysis identified 3 types of perception toward male nurses. Type 1 was classified as 'development-oriented support type', Type 2 was classified as 'realistic critical type', and Type 3 was classified as 'conservative acceptance type'. The consensus of opinion in each type was 'Male nurses are under stress due to the unique characteristics of a female-dominated workplace'. These results will contribute to the perception improvement of female nurses toward male nurses by developing arbitration programs based on the three types.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.157-163
• /
• 2018

This study is aimed at controlling the fiber orientation and improve the fiber distribution in fiber-reinforced cement composites using blades that can be placed inside the existing nozzles. To optimize the blade parameters, multi-physics finite element analysis was performed that could account for the flow of the cementitious matrix material, the movement of the entrained fibers, and the interactions with the nozzle. As a result, this study defined the blade distance, length, and position as a function of the fiber length to be used in the field. The blades with a distance from 1.2 to 2.4 times the fiber length and length from 4 to 8 times the fiber length, as well as located at below 14 times the fzfiber length from the nozzle exit maintained the fiber orientation angle less than $5^{\circ}$. In addition, the blade-type nozzle proposed in the study can be attachable and detachable to the conventional casting equipment, and thus it can provide the usability and convenience in practical applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.377-385
• /
• 2018

For the investigation of dopant profiles in implanted $Si_{1-x}Ge_x$, the implanted B and As profiles are measured using SIMS (secondary ion mass spectrometry). The fundamental ion-solid interactions of implantation in $Si_{1-x}Ge_x$ are discussed and explained using SRIM, UT-marlowe, and T-dyn programs. The annealed simulation profiles are also analyzed and compared with experimental data. In comparison with the SIMS data, the boron simulation results show 8% deviations of $R_p$ and 1.8% deviations of ${\Delta}R_p$ owing to relatively small lattice strain and relaxation on the sample surface. In comparison with the SIMS data, the simulation results show 4.7% deviations of $R_p$ and 8.1% deviations of ${\Delta}R_p$ in the arsenic implanted $Si_{0.2}Ge_{0.8}$ layer and 8.5% deviations of $R_p$ and 38% deviations of ${\Delta}R_p$ in the $Si_{0.5}Ge_{0.5}$ layer. An analytical method for obtaining the dopant profile is proposed and also compared with experimental and simulation data herein. For the high-speed CMOSFET (complementary metal oxide semiconductor field effect transistor) and HBT (heterojunction bipolar transistor), the study of dopant profiles in the $Si_{1-x}Ge_x$ layer becomes more important for accurate device scaling and fabrication technologies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.235-240
• /
• 2005

Articulation type container cranes are the boom forms an inverted L shape when raise. The inner boom section is nearly vertical when raise and the outer boom section is nearly horizontal. Articulation type container cranes were developed as a lower height crane to meet aircraft clearance requirements. Because the height of an Articulation type container crane is about 70m, the crane is subjected to the effect of Wind load. Therefore, the problem on the effect of Wind load is receiving carefully study. The researches for the effect of wind load on the structural stability of a conventional container crane are conducted. In this study, we carried out the investigation for an articulation type container crane. When a wind load is applied to a container crane, we analyzed the reaction force distribution at each supporting point of a crane with respect to a wind load direction and the effect of the change of the machinery house location on the structural stability rf a crane by carrying out Finite Element Analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.269-274
• /
• 2005

This study gathered the factor of supply chain risk through literature review, and measured the importance of risk factors which have been recognized by domestic companies. This study has purposes and necessities as follows. First, supply risk factors were classified and explored through positive studies about supply chain risk. Most of previous studies helps grasping the meaning of supply chain risk but limited in conceptual side. Second, this study used AHP(Analytic Hierarchy Process) method which makes decision-making problem classified, simplicated and systematized to evaluate the importance of supply-chain risk recognized by the companies. Finally, this study suggests registration-point in companies's efficient supply activity would be great by measuring the importance of supply-chain through AHP(Analytic Hierarchy Process).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2022-2028
• /
• 2015

SpaceWire is a standard for high-speed links and networks between spacecraft components, which was invented for better, cheaper and faster on-board data handling in spacecraft. The standard defines timecode and its distribution which can be used for time synchronization among the nodes in a SpaceWire network. A timecode output from the time master which provides standard time over a SpaceWire network travels through links and routers to reach every nodes. While traveling, a timecode suffers from transmission delay and jitter which cause some difference in time synchronization among nodes. In this work, a simulator was developed using OMNeT++ to simulate the operation of a SpaceWire network and some analyses were performed on the transmission delay and jitter accompanied with a transmission of a timecode. The result will be used in the near future for the research of a precise time synchronization technique over a SpaceWire network.