• Journal of Preventive Medicine and Public Health
• /
• v.42 no.5
• /
• pp.305-314
• /
• 2009

Objectives : The physical activity of Korean adolescents and its distribution based on social characteristics have not yet been fully assessed. This study intends to reveal the distribution of physical activity by its subgroups and offer possible explanatory variables. Methods : The 3rd Korea Youth Risk Behavior Web-based Survey was analyzed for this study. The appropriateness of physical activity was defined by Korea s Health Plan 2010 and physical inactivity was assessed independently. Family affluence scale, parents education levels, subjective economic status, grade, and school location were considered explanatory variables. All statistical analysis was conducted using SAS ver. 9.1. Results : The proportion of participants engaging in vigorous physical activity was high in males (41.6%), at a low grade (38.5%), within the high family affluence scale group (35.5%). The distribution of participants engaging in moderate physical activity showed similar patterns, but the overall proportion was lower (9.8%). Low family affluence and students with lower subjective economic status reported a higher prevalence of physical inactivity. In multiple logistic regression analysis for physical activity, significant factors included family affluence scale (p<0.05). For physical inactivity, family affluence scale, parents education levels, and subjective economic status were included as significant factors (p<0.05). Conclusions : The results suggest that the physical activity and inactivity of adolescents may be affected by socioeconomic variables, such as family affluence scale. This implies the need to take proper measures to address these socio-economic inequalities.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.205-214
• /
• 2014

Purpose: Phytosanitary irradiation treatment can effectively control regulated pests while maintaining produce quality. The objective of this study was to establish the best irradiation treatment for mangosteen, a popular tropical fruit, using a Monte Carlo simulation. Methods: Magnetic resonance image (MRI) data were used to generate a 3-D geometry to simulate dose distributions in a mangosteen using a radiation transport code (MCNP5). Microsoft Excel with visual basic application (VBA) was used to divide the image data into seed, flesh, and rind. Radiation energies used for the simulation were 10 MeV (high-energy) and 1.35 MeV (low-energy) for the electron beam, 5 MeV for X-rays, and 1.25 MeV for gamma rays from Co-60. Results: At 5 MeV X-rays and 1.25 MeV gamma rays, all areas (seeds, flesh, and rind) were irradiated ranging from 0.3 ~ 0.7 kGy. The average doses decreased as the number of fruit increased. For a 10 MeV electron beam, the dose distribution was biased: the dose for the rind where the electrons entered was $0.45{\pm}0.03$ kGy and the other side was $0.24 {\pm}0.10$ kGy. Use of an electron kinetic energy absorber improved the dose distribution in mangosteens. For the 1.35 MeV electron beam, the dose was shown only in the rind on the irradiated side; no significant dose was found in the flesh or seeds. One rotation of the fruit while in front of the beam improved the dose distribution around the entire rind. Conclusion: These results are invaluable for determining the ideal irradiation conditions for phytosanitary irradiation treatment of tropical fruit.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.397-400
• /
• 2007

For mapping the distribution of heavy metals in the mining area, field spectroscopy and hyperspectral remote sensing were used in this study. Although heavy metals are spectrally featureless from the visible to the short wave infrared range, possible variations in spectral signal due to heavy metals bound onto minerals can be explained with the metal binding reaction onto the mineral surface. Variations in the spectral absorption shapes of lattice OH and oxygen on the mineral surface due to the combination of heavy metals were surveyed over the range from 420 to 2400 nm. Spectral parameters such as peak ratio and peak area were derived and statistically linked to metal concentration levels in the streambed samples collected from the dry stream channels. The spatial relationships between spectral parameters and concentrations of heavy metals were yielded as well. Based on the observation at a ground level for the relationship between spectral signal and metal concentration levels, the spectral parameters were classified in a hyperspectral image and the spatial distribution patterns of classified pixels were compared with the product of analysis at the ground level. The degree of similarity between ground dataset and image dataset was statistically validated. These techniques are expected to support assessment of dispersion of heavy metal contamination and decision on optimal sampling point.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.167-174
• /
• 1993

Recently, stereotactic radiosurgery plan is required with the information of 3-D image and dose distribution. A project has been doing if developing LINAC based stereotactic radiosurgery since April 1991. The purpose of this research is to develop 3-D radiosurgery planning system using personal computer. The procedure of this research is based on two steps. The first step is to develop 3-D localization system, which input the image information of the patient, coordinate transformation, the position and shape of target, and patient contour into computer system using CT image and stereotactic frame. The second step is to develop 3-D dose planning system, which compute dose distribution on image plane, display on high resolution monitor both isodose distribution and patient image simultaneously and develop menu-driven planning system. This prototype of radiosurgery planning system was applied recently for several clinical cases. It was shown that our planning system is fast, accurate and efficient while making it possible to handle various kinds of image modalities such as angiography, CT and MRI. It makes it possible to develop general 3-D planning system using beam's eye view or CT simulation in radiation therapy in future.

• Radiation Oncology Journal
• /
• v.38 no.1
• /
• pp.52-59
• /
• 2020

Purpose: To evaluate and compare the feasibilities of magnetic resonance (MR) image-based planning using synthetic computed tomography (sCT) versus CT (pCT)-based planning in helical tomotherapy for prostate cancer. Materials and Methods: A retrospective evaluation was performed in 16 patients with prostate cancer who had been treated with helical tomotherapy. MR images were acquired using a dedicated therapy sequence; sCT images were generated using magnetic resonance for calculating attenuation (MRCAT). The three-dimensional dose distribution according to sCT was recalculated using a previously optimized plan and was compared with the doses calculated using pCT. Results: The mean planning target volume doses calculated by sCT and pCT differed by 0.65% ± 1.11% (p = 0.03). Three-dimensional gamma analysis at a 2%/2 mm dose difference/distance to agreement yielded a pass rate of 0.976 (range, 0.658 to 0.986). Conclusion: The dose distribution results obtained using tomotherapy from MR-only simulations were in good agreement with the dose distribution results from simulation CT, with mean dose differences of less than 1% for target volume and normal organs in patients with prostate cancer.

• The Journal of the Korean dental association
• /
• v.58 no.8
• /
• pp.476-485
• /
• 2020

The purpose of this study was to analyze the color distribution of the maxillary primary central and lateral incisors using a dental spectrophotometer. Color measurements of maxillary primary central and lateral incisors of 32 pediatric patients aged 2 to 6 years were performed using SpectroShade Handy Dental Type 713000 (Serial No. HDL2678, MHT, Verona, Italy) by one researcher in the same clinic. CIE L*, a*, b* values of total surfaces and cervical, middle, incisal region were recorded. L* values were higher and a* values were lower in the primary central incisors than those in primary lateral incisors, but b* values didn't show statistical difference. L* values of the middle region were the highest, and a* and b* values decreased from the cervical region to the incisal region. There were significant color differences between each region, and ΔE*_ab between each region were greater than ΔE*_ab between the primary central and lateral incisors. For esthetic restorations of primary incisors, it is necessary to consider the color differences between each region rather than those between the primary central and lateral incisors.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.51-60
• /
• 2017

In this study, the concentrations of As, Cd, Cu, Pb and Zn in agricultural soils across a region of South Korea (Buyeo County) were investigated. Their pollution sources were assessed using multivariate statistical analysis, and Geographic Information System (GIS) technology was used to determine the distribution of these elements. Surface soil samples were collected from 114 locations across the agricultural fields in the study site. Cu and Zn were derived from natural sources (i.e., parent rocks of the soil), whereas As, Cd, and Pb were found to be originated from abandoned mines. The results of this study clearly show that the transport of anthropogenic As, Cd, and Pb is governed mostly by the specific environment of the paddy soil. Our approach was effective in clearly identifying the sources of metals and analyzing their contamination characteristics. We believe this study will provide useful information to future studies on soil pollution by anthropogenic sources.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup2
• /
• pp.211-215
• /
• 2001

Objective : The present study was performed to analyze treatment results for 22 cases of arachnoid cyst and to have appropriate surgical method in our department. Material and Methods : We performed a retrospective study in 22 cases in 11 years between 1989 to 2000 that could be followed up. The analysis was based on the results of patients age, sex distribution, developed area, clinical symptom, treatment method, and complication. Results : The age range of cyst development was between 7 months to 60 years with the average age of 21 years. As for sex distribution, 20 were male and 2 were female, with significantly more cyst development in males than females. Thirteen cases were developed in the sylvian fissure, 3 cases in the posterior fossa, 4 cases in the cerebral convexity of the supratentorial area, 1 case in the suprasella and 1 case in interhemiphere. Those cases with the sylvian fissure involvement included 6 cases of Type I, 4 cases of Type II, and 3 cases of Type III. As for the distribution according to hemisphere, more arachnoidal cysts were seen in the right hemisphere. The most common clinical symptom was headache, followed by seizure and speech disturbance. As for the treatment method in 22 cases, surgery was performed in 17 cases and conservative treatment in 5 cases. Fenestration was performed in 14 cases. 13 cases of them showed good outcome, and 1 case with delayed development showed no improvement. Cyst-peritoneal shunt was done in 2 cases. Both fenestration and cyst-peritoneal shunt were done in 1 case. Conclusion : Patients who perforemed fenestration were showed good outcome with few complication. We concluded that fenestration is the most appropriate surgical method for arachnoid cyst.

• Particle and aerosol research
• /
• v.18 no.3
• /
• pp.69-77
• /
• 2022

In order to understand the characteristics of fine particles emitted from coal-fired power plant stacks, it is important to analyze the size distribution and components of particles. In this study, particle size distributions were measured using the ejector-porous tube dilution device and an ELPI system at a stack in a coal-fired power plant. Main elemental components of particles in each size interval were also identified through TEM-EDS analysis for the particles collected in each ELPI stage. Particle size distributions based on number and mass were analyzed with component distributions from 0.006 to 10 ㎛. The highest number concentration was about 0.01 ㎛. The main component of the particles consisted of sulfur, which indicated that sulfate aerosols were generated by gas-to-particle conversion of SO2. In a mass size distribution, a mono-modal distribution with a mode diameter of about 2 ㎛ was shown. For the components of PM1.0 (particles less than 1 ㎛), the abundance order was F > Mg > S > Ca, and however, for the components of PM10 (particles less than 10 ㎛), it was in the order of Fe > S > Ca > Mg. The elemental components by particle size were confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1143-1148
• /
• 2014

This paper has analyzed the change of subthreshold swing for doping distribution function of asymmetric double gate(DG) MOSFET. The basic factors to determine the characteristics of DGMOSFET are dimensions of channel, i.e. channel length and channel thickness, and doping distribution function. The doping distributions are determined by ion implantation used for channel doping, and follow Gaussian distribution function. Gaussian function has been used as carrier distribution in solving the Poisson's equation. Since the Gaussian function is exactly not symmetric for top and bottome gates, the subthreshold swings are greatly changed for channel length and thickness, and the voltages of top and bottom gates for asymmetric double gate MOSFET. The deviation of subthreshold swings has been investigated for parameters of Gaussian distribution function such as projected range and standard projected deviation in this paper. As a result, we know the subthreshold swing is greatly changed for doping profiles and bias voltage.