• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.15-23
• /
• 2017

Wireless power transmission (WPT) for wireless charging is currently attracting much attention as a promising approach to miniaturize batteries and increase the maximum total range of an electric vehicle. The main advantage of the laser power beam (LPB) approach is its high power transmission efficiency (PTE) over long distance. In this paper, we present the design of a laser power beam based WPT system, which has a best WPT channel selection technique at the receiver end when multiple power transmitters and single power receiver are operated simultaneously. The transmitters send their transmission channel information via optically modulated laser pulses. The receiver uses the received signal strength indicator and digitized data to choose an optimum power transmission path. We modeled a vertical multi-junction photovoltaic cell array, and conducted an experiment and simulation to test the feasibility of this system. From the experimental result, the standard deviation between the mathematical model and the measured values of normalized energy distribution is 0.0052. The error between the mathematical model and measured values are acceptable, thus the validity of the model is verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.587-593
• /
• 2010

In this paper we design an irregular low-density parity-check (LDPC) code for multiple-input multiple-output (MIMO) system, using a simple extrinsic information transfer (EXIT) chart method. The MIMO systems considered are optimal maximum a posteriori probability (MAP) detector. The MIMO detector and the LDPC decoder exchange soft information and form a turbo iterative receiver. The EXIT charts are used to obtain the edge degree distribution of the irregular LDPC code which is optimized for the MIMO detector. It is shown that the performance of the designed LDPC code is better than that of conventional LDPC code which was optimized for either the Additive White Gaussian Noise (AWGN) channel or the MIMO channel.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.980-992
• /
• 2024

Steam line break accident (SLB) in the nuclear reactor is one of the representative Non-LOCA accidents in which thermal-hydraulics and neutron kinetics are strongly coupled each other. Thus, the multi-scale and multi-physics approach is applied in this study in order to examine a realistic safety margin. An entire reactor coolant system is modelled by system scale node, whereas sub-channel scale resolution is applied for the region of interest such as the reactor core. Fuel performance code is extended to consider full core pin-wise fuel behaviour. The MARU platform is developed for easy integration of the codes to be coupled. An initial stage of the steam line break accident is simulated on the MARU platform. As cold coolant is injected from the cold leg into the reactor pressure vessel, the power increases due to the moderator feedback. Three-dimensional coolant and fuel behaviour are qualitatively visualized for easy comprehension. Moreover, quantitative investigation is added by focusing on the enhancement of safety margin by means of comparing the minimum departure from nucleate boiling ratio (MDNBR). Three factors contributing to the increase of the MDNBR are proposed: Various geometric parameters, realistic power distribution by neutron kinetics code, Radial coolant mixing including sub-channel physics model.

• Journal of Distribution Research
• /
• v.4 no.3
• /
• pp.87-103
• /
• 2000

Throughout the nation, each local Agricultural Cooperative (AC) has built its own agri-products processing factory in order to provide the steady demand source for the locally produced agri-products. However, each factory of AC has performed poorly with no competitive advantages against the national brands of private companies. Thus, from the perspective of the National Agricultural Cooperative Federation (NACF), the current situation of unorganized and inefficient management of the factories under the control of each local AC needs to be improved. In this case analysis, we introduce the problems of the AC factories and discuss the NACF's approach to solve the problems. In particular, given that AC as well as NACF are the non-profit organizations, it is worthwhile to fay special attention to the process of restructuring the system of distribution channels for the processed agri-products with the concept of marketing.

• Fisheries and Aquatic Sciences
• /
• v.10 no.2
• /
• pp.86-92
• /
• 2007

Adult Dungeness crabs are restricted primarily in the lower part of Glacier Bay, Alaska, but the interaction of larval dispersion and adult distribution is unknown. To understand the larval occurrence in the upper part of Glacier Bay, Dungeness crab larvae, sea surface temperature (SST), and sea surface salinity (SSS) were collected at 16 near-shore and 12 mid-channel stations in Glacier Bay, southeastern Alaska during six sampling periods from March through August 2000. Each station was visited from one to five times during the entire sampling period. Geographic Information System (GIS) was used to contour SST and SSS distribution in Glacier Bay. Seven to 27 stations were visited during each sampling period. Most larvae (85% were zoeae I) occurred during May 31 to June 14, 2000. Larval density varied from none to $51.4\;100\;m^{-3}$ between stations. A few later stage larvae occurred during later sampling periods. Overall, no relationship between larval densities, and SSS, and SST existed. Larvae occurring in the upper bay were probably transported by tidal currents from the lower bay; adult Dungeness crabs in Glacier Bay have a relatively high density near the mouth of the bay but decrease sharply around 40km north of the mouth. The lack of adult crabs in the upper 60km of the bay may be related to lower salinity, resulting in sharp haloclines, or colder temperatures which are not conducive to survival or growth of either larvae or adults.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.277-283
• /
• 2019

In this paper, we propose a distributed fusion estimation for sensor networks using a receding horizon strategy. Communication channels were modelled as Markov jump systems, and a posterior probability distribution for communication channel characteristics was calculated and incorporated into the filter to allow distributed fusion estimation to handle path loss observation situations automatically. To implement distributed fusion estimation, a Kalman-Consensus filter was then used to obtain the average consensus, based on the estimates of sensors randomly distributed across sensor networks. The advantages of the proposed algorithms were then verified using a large-scale sensor network example.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.249-252
• /
• 2001

The most basic means of communication among humans is a voice. Without speaking of voice technologies, we found it is important and convenient to use a voice in everyday life. But. in consideration to speech recognition systems, we can't always desire a normal voice input as input signal to the system. Generally speaking. a pathological voice as against a normal which is a voice with a problem in the larynx. could be also special case of input voice. Of course, but the distortion of a speech signal by environmental effects i.e., noise or transmission channel was a raised problem. we will take up a pathological voices with laryngeal disease which is essential distortion factor in voice. Also, we are to find out the difference of acoustic parameters distribution between normal and pathological voice by a statistical method in our research.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2543-2545
• /
• 2002

There are many applicable services such as remote metering, load control, distribution line automation, Pole transformer Monitoring having their own networks in the electric power company. The application of the optical network technology as the back-born network to the Automation Systems in KEPCO is potentially beneficial in reliability, speed, and expandability. The 1-core and 2-core optical modems were developed and used by the Distribution Automation System. But, They had some disadvantages and advantages. So, We designed the new optical modems applied each advantages. This paper presents some of design efforts and test results for the multi-channel optical modem at KRPRI.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.384-389
• /
• 2009

Optical wireless communication (OWC) systems are rapidly gaining popularity as effective means of transferring data at high rates over short distances. OWC facilitates rapidly deployable, lightweight, high-capacity communication without licensing fees and tariffs. Nevertheless, the performance of this new technology depends strongly on the atmospheric conditions and the characteristics of the link. In this work, we study the influence of these parameters on both the average (ergodic) capacity and the outage capacity of an OWC system over moderate to strong turbulence channels modeled by gamma-gamma distribution. Moreover, we compare the results that we obtain estimating the average and outage capacities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.1
• /
• pp.96-102
• /
• 2013

This paper makes a detailed comparison between two metrics designed for measuring customer's satisfaction in the retail industry. The first metric, which is called the customer service level, has not been widely used due to the intrinsic requirement on the parameter assumption(s) of the demand distribution. Unlike the customer service level metric the in stock ratio metric does not require any requirements on the demand distribution. And the in stock ratio metric is also very easy to understand the meaning. To develop the detailed planning activities for business with the in stock ratio metric on hand one should collect some information as following : 1) POS (Point of sales) data, 2) Inventory Data 3) Inventory Trend.