• International Journal of Fluid Machinery and Systems
• /
• v.3 no.1
• /
• pp.11-19
• /
• 2010

The performance of the crossover system of a centrifugal compressor stage consisting of static components of $180^{\circ}$ U-bend, return channel vanes and exit ducting with a $90^{\circ}$ bend is investigated. This study is confined to the assessment of performance of the crossover system by varying the shape of the return channel vanes. For this purpose two different types of Return Channel Vanes (RCV1 and RCV2) were experimentally investigated. The performance of the crossover system is discussed in terms of total pressure loss coefficient, static pressure recovery coefficient and vane surface pressure distribution. The experimentation was carried out on a test setup in which static swirl vanes were used to simulate the flow at the exit of an actual centrifugal compressor impeller with a design flow coefficient of 0.053. The swirl vanes are connected to a mechanism with which the flow angle at the inlet of U-bend could be altered. The measurements were taken at five different operating conditions varying from 70% to 120% of design flow rate. On an overall assessment RCV1 is found to give better performance in comparison to RCV2 for different U-bend inlet flow angles. The performance of RCV2 was verified using numerical studies with the help of a CFD Code. Three dimensional sector models were used for simulating the flow through the crossover system. The turbulence was predicted with standard k-$\varepsilon$, 2-equation model. The iso-Mach contour plots on different planes and development of secondary flows were visualized through this study.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.220-223
• /
• 2009

A simple measurement system is built to estimate the dual-antenna diversity gain at 2.4GHz easily in open lab environment. To obtain multipath fading propagation channel, the system consists of two transmission horn that placed on opposite direction and a rotating stage mechanically changing the position of test dual-antenna with time over distance greater than one wavelength. Estimated diversity is nearly same as theoretical value such that measured diversity gain of 30mm separated is about 6dB similar to theoretical value of 5.7dB and increases monotonically with the increasing separation distance as predicted by the theory. Proposed measurement system that is simple enough to fit in a small space can evaluate the performance of various dual-antennas with a reasonable accuracy with lower 5% difference between the ten sets of measured waveform distribution and theoretical Rayleigh cumulative distribution.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.57-60
• /
• 2001

Most power retailers adopt systematic, integral supply chain system to minimize the logistics cost. However, small and medium sized retail shops that don't have a distribution channel, unavoidably spend a big amount of distribution cost. This study is to propose an efficient system to manage the information of trucks by using the portable GPS. This system includes the real-time mapping of truck location, the transmission of delivery information from the truck, and the algorithm concerning the selection of the most cost efficient truck.

• Journal of Power System Engineering
• /
• v.3 no.1
• /
• pp.29-37
• /
• 1999

The flow characteristics of a NACA0012 airfoil was investigated in rectangular water circulating channel. The flow patterns around an airfoil at various angles of attack between $0^{\circ}\;and\;30^{\circ}\;at\;Re=1.91{\times}104$ were visualized and measured with 2-D PIV system and laser sheet illumination. Flow behaviors such as velocity distribution, kinetic energy and flow separation etc. around an airfoil were obtained by means of 2-D PIV system. The behaviors show the difference of flow pattern clearly and separation phenomena become more active with increasing angle of attack.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.205-213
• /
• 2011

The Long Term Evolution (LTE) system is designed to provide a high quality data service for fast moving mobile users. It is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the training samples which are systematically built within the transmitting data. Either a preamble or a lattice type is used for the distribution of training samples and the latter suits better for the multipath fading channel environment whose channel frequency response (CFR) fluctuates rapidly with time. In the lattice-type structure, the estimation of the CFR makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time-and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. All interpolation schemes should rely on the pilot estimates only, and thus, their performances are bounded by the quality of pilot estimates. However, the additive noise give rise to high fluctuation on the pilot estimates, especially in a communication environment with low signal-to-noise ratio. These high fluctuations could be monitored in the alternating high values of the first forward differences (FFD) between pilot estimates. In this paper, we analyzed statistically those FFD values and propose a postprocessing algorithm to suppress high fluctuations in the noisy pilot estimates. The proposed method is based on a localized adaptive moving-average filtering. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification. It is shown that the mean-squared error (MSE) between the actual CFR and pilot estimates could be reduced up to 68% from the noisy pilot estimates.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1172-1177
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW steam supply and power generation system. Three different test geometries have been chosen for the numerical simulation. The existing design for 300 kW HRSG system (CASE B) has been improved by geometry and position changes of inlet guide vanes along with gas velocity entrance angle at the diverging channel inlet (CASE C). Both cases has been compared with the case where hot combustion gas is directly injected without any guide vanes (CASE A). Improved design shows overall uniform velocity and temperature distribution compared to existing design.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.803-816
• /
• 2016

The purposes of this study were to investigate the influences of channel assessments on the usage of multi-channels by product types, and the differences in the usage of multi-channels among product types in buying decision making process for fashion products. Data were collected from 510 consumers in their 20s to 50s with purchasing experiences through multi-channel distribution system and living in Seoul and Kyunggi province; 491 were analyzed after deleting incomplete questionnaires. Factor analysis, multiple regression analysis and one-way ANOVA were used for statistical analysis by using SPSS 18.0. The results were as follows: 5 factors were extracted for channel assessment: utility, accuracy, risk, price benefit and sharing information. Price benefits, utility and sharing information for online channel tended to influence positively on the usage of online channel and online+offline channels. Accuracy and low perceived risk of offline influenced positively on offline and on+offline channel usages. The usage levels of on-line and off-line channels for cosmetics were significantly lower than the usage levels for clothes and accessories on information search, evaluation of alternatives, and purchase stages. Significant differences were also found in the usage levels of multi-channels (on+off-line) on information search and evaluation of alternatives stages. The usage levels of the multi-channels for clothes were the highest followed by those of accessories and cosmetics in order.

• Journal of Radiation Protection and Research
• /
• v.43 no.3
• /
• pp.97-106
• /
• 2018

Background: A cargo container scanner using a high-energy X-ray generates a fan beam X-ray to acquire a transmitted image. Because the generated X-rays by LINAC may affect the image quality and radiation protection of the system, it is necessary to acquire accurate information about the generated X-ray beam distribution. In this paper, a diode-based multi-channel spatial dose measuring device for measuring the X-ray dose distribution developed for measuring the high energy X-ray beam distribution of the container scanner is described. Materials and Methods: The developed high-energy X-ray spatial dose distribution measuring device can measure the spatial distribution of X-rays using 128 diode-based X-ray sensors. And precise measurement of the beam distribution is possible through automatic positioning in the vertical and horizontal directions. The response characteristics of the measurement system were evaluated by comparing the signal gain difference of each pixel, response linearity according to X-ray incident dose change, evaluation of resolution, and measurement of two-dimensional spatial beam distribution. Results and Discussion: As a result, it was found that the difference between the maximum value and the minimum value of the response signal according to the incident position showed a difference of about 10%, and the response signal was linearly increased. And it has been confirmed that high-resolution and two-dimensional measurements are possible. Conclusion: The developed X-ray spatial dose measuring device was evaluated as suitable for dose measurement of high energy X-ray through confirmation of linearity of response signal, spatial uniformity, high resolution measuring ability and ability to measure spatial dose. We will perform precise measurement of the X-ray beamline in the container scanning system using the X-ray spatial dose distribution measuring device developed through this research.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3016-3033
• /
• 2014

The downlink performance of distributed antenna systems (DAS) with antennas selection is investigated in Rayleigh fading multicell environment, and the corresponding system capacity and bit error rate (BER) analysis are presented. Based on the moment generating function, the probability density function (PDF) and cumulative distribution function (CDF) of the effective signal to interference plus noise ratio (SINR) of the system are first derived, respectively. Then, with the available CDF and PDF, the accurate closed-form expressions of average channel capacity and average BER are further derived for exact performance evaluation. To simplify the expression, a simple closed-form approximate expression of average channel capacity is obtained by means of Taylor series expansion, with the performance results close to the accurate expression. Besides, the system outage capacity is analyzed, and an accurate closed-form expression of outage capacity probability is derived. These theoretical expressions can provide good performance evaluation for DAS downlink. It can be shown by simulation that the theoretical analysis and simulation are consistent, and DAS with antenna selection outperforms that with conventional blanket transmission. Moreover, the system performance can be effectively improved as the number of receive antennas increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.37-42
• /
• 2021

NOMA (Non-orthogonal multiple Access) system has been focused on the next generation cellular system for higher spectral efficiency. However, this requires user scheduling as the NOMA system is a multi-user system which accesses simultaneously. There are two representative scheduling schemes, proportionate scheduling (FP) and cumulative distribution function (CFD) scheduling. The PF scheduling is applied, the cell edge user is hard to obtain a transmit opportunity. Recently, CDF scheduling is obviously noted that it offers the same possibility of transmission for a user regardless of the location in a cell. We consider an uplink NOMA system with CDF scheduling, and obtain the channel access probabilities, the outage probabilities of the system with different number of users and different kinds of weights through simulation. The results indicate that the likelihood of each user accessing the channel is the same and the probability of failure decreases as the number of users increases. We found that the effect of the probability of failure is negligible as the weight of the cell edge user increases.