• 제목/요약/키워드: Distributed-Element

검색결과 833건 처리시간 0.027초

A CELL BOUNDARY ELEMENT METHOD FOR A FLUX CONTROL PROBLEM

  • Jeon, Youngmok;Lee, Hyung-Chun
    • 대한수학회지
    • /
    • 제50권1호
    • /
    • pp.81-93
    • /
    • 2013
  • We consider a distributed optimal flux control problem: finding the potential of which gradient approximates the target vector field under an elliptic constraint. Introducing the Lagrange multiplier and a change of variables the Euler-Lagrange equation turns into a coupled equation of an elliptic equation and a reaction diffusion equation. The change of variables reduces iteration steps dramatically when the Gauss-Seidel iteration is considered as a solution method. For the elliptic equation solver we consider the Cell Boundary Element (CBE) method, which is the finite element type flux preserving methods.

Bending Analysis of Mindlin-Reissner Plates by the Element Free Galerkin Method with Penalty Technique

  • Park, Yoo-Jin;Kim, Seung-Jo
    • Journal of Mechanical Science and Technology
    • /
    • 제17권1호
    • /
    • pp.64-76
    • /
    • 2003
  • In this work, a new penalty formulation is proposed for the analysis of Mindlin-Reissner plates by using the element-free Galerkin method. A penalized weak form for the Mindlin-Reissner Plates is constructed through the exterior penalty method to enforce the essential boundary conditions of rotations as well as transverse displacements. In the numerical examples, some typical problems of Mindlin-Reissner plates are analyzed, and parametric studies on the order of integration and the size of influence domain are also carried out. The effect of the types of background cells on the accuracy of numerical solutions is observed and a proper type of background cell for obtaining optimal accuracy is suggested. Further, optimal order of integration and basis order of Moving Least Squares approximation are suggested to efficiently handle the irregularly distributed nodes through the triangular type of background cells. From the numerical tests, it is identified that unlike the finite element method, the proposed element-free Galerkin method with penalty technique gives highly accurate solution without shear locking in dealing with Mindlin-Reissner plates.

연속체요소를 이용한 이방성 박판재료 성형공정의 강소성 유한요소해석 (Rigid-Plastic Finite Element Analysis of Anisotropic Sheet Metal Forming Processes by using Continuum Elements)

  • 이동우;양동열
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1997년도 추계학술대회논문집
    • /
    • pp.24-27
    • /
    • 1997
  • In the present work, rigid-plastic continuum elements employing the shape change and anisotropic effects are derived for the purpose of applying more realistic blankholding force condition in three-dimensional finite element analysis of sheet metal forming process. In order to incorporate the effect of shape change effectively in the derivation of finite element equation using continuum element for sheet metal forming, the convected coordinate system is introduced, rendering the analysis more rigorous and accurate. The formulation is extended to cover the orthotropic material using Hill's quadratic yield function. For the purpose of applying more realistic blankholding force condition, distributed normal and associated frictional tangent forces are employed in the blankholder, which is pressed normal and associated frictional tangent forces are employed in the blankholder, which is pressed against the flange until the resultant contact force with the blank reaches the prescribed value. As an example of sheet metal forming process coupling the effect of planar anisotropy and that of blankholding boundary condition, circular cup deep drawing has been analyzed considering both effects together.

  • PDF

STEP을 이용한 유한요소해석 정보모델 구축 (Information Modeling for Finite Element Analysis Using STEP)

  • 최영;조성욱;권기억
    • 한국CDE학회논문집
    • /
    • 제3권1호
    • /
    • pp.48-56
    • /
    • 1998
  • Finite element analysis is very important in the design and analysis of mechanical engineering. The process of FEA encompasses shape modeling, mesh generation, matrix solving and post-processing. Some of these processes can be tightly integrated with the current software architectures and data sharing mode. However, complete integration of all the FEA process itself and the integration to the manufacturing processes is almost impossible in the current practice. The barriers to this problem are inconsistent data format and the enterprise-wise software integration technology. In this research, the information model based on STEP AP209 was chosen for handling finite element analysis data. The international standard for the FEA data can bridge the gap between design, analysis and manufacturing processes. The STEP-based FEA system can be further tightly integrated to the distributed software and database environment using CORBA technology. The prototype FEA system DICESS is implemented to verify the proposed concepts.

  • PDF

원추형 코일스프링의 강성해석 (Analysis of Stiffness for Frustum-shaped Coil Spring)

  • 김진훈;이수종;김정렬
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권2호
    • /
    • pp.250-255
    • /
    • 2008
  • Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression. principle of virtual work is adapted. And this theory was programming using MATLAB software. To compare FEM using MATLAB software was applied MSC. Nastran software. The geometry model for MSC. Patran was produced by 3-D design modeling software. Finite element model was produced by MSC. Patran. Finite element was applied tetra (CTETRA) having 10 node. The analysis results of the MATLAB and MSC. Nastran are fairly well agreed with those of various experiments. Using MATLAB program proposed in this paper and MSC. Nastran, spring constants and stresses can be predicted by input of few factors.

압축잔류응력에 의하여 선단부가 닫힌 균열의 개구거동에 대한 유한요소법에 의한 해석방법의 제안 (A Proposal of an Analytical Method for Estimating the Opening Behaviour of Tip-Closed Crack in Compressive Residual Stress by Finite Element Method)

  • 김응준;박응준;유승현
    • Journal of Welding and Joining
    • /
    • 제21권6호
    • /
    • pp.71-76
    • /
    • 2003
  • For the purpose of clarifying the influence of welding residual stress to the fatigue crack propagations behaviour, an analytical investigation based on finite element method is performed to examine the opening behaviour of tip-closed crack in the compressive residual stress. A finite element model comprised of contact elements for the crack plane and plane stress elements for the base material is used to evaluate crack opening stress of the crack existing in the residual stress field. Also an analytical method based on the superposition principle to estimate the length of opened part of tip closed crack and the stress distribution adjacent to the crack during uploading is applied to the finite element model. The software for the analysis is ABAQUS, which is a general purpose finite element package. The results show that stresses distributed on the crack surfaces are reduced and approached to zero as the applied stresses are increased up to crack tip opening stress and no mechanical discontinuity is found at the boundary of contact elements and plane stress elements. It is verified that the opening behavior of the fatigue crack in the residual stress can be predicted by finite element method with the proposed analytical method.

An effective solution of electro-thermo-structural problem of uni-axially graded material

  • Murin, J.;Kutis, V.;Masny, M.
    • Structural Engineering and Mechanics
    • /
    • 제28권6호
    • /
    • pp.695-713
    • /
    • 2008
  • The aim of this contribution is to present a new link/beam finite element suitable for electrothermo-structural analysis of uni-axially graded materials. Continuous polynomial variation of geometry and material properties will be considered. The element matrix and relations for solution of Joule's heat (and its distribution to the element nodes) have been established in the sense of a sequence method of a coupled problem solution. The expression for the solution of nodal forces caused by a continuously distributed temperature field has also been derived. The theoretical part of this contribution is completed by numerical validation, which proves the high accuracy and effectiveness of the proposed element. The results of the performed experiments are compared with those obtained using the more expensive multiphysical link element and solid element of the FEM program Ansys. The proposed finite element could be used not only in the multiphysical analysis of the current paths and actuators but also in analysis of other 1D construction parts made of composite or uni-axially graded materials.

부분분포하중이 평면 포물선아치의 동적응답에 마치는 영향 (Effects of Partially Distributed Loads on Dynamic Response of Plane Parabolic Arch)

  • 조진구;박근수
    • 한국농공학회논문집
    • /
    • 제46권6호
    • /
    • pp.21-28
    • /
    • 2004
  • This study aims to investigate the effects of partially distributed loads on the dynamic behaviour of steel parabolic arches by using the elasto-plastic finite element model based on the Von Mises yield criteria and the Prandtl-Reuss How rule. For this purpose, the vertical and the radial load conditions were considered as a distributed loading and the loading range is varied from 40% to 100% of arch span. Normal arch and arch with initial deflection were studied. The initial deflection of arch was assumed by the sinusoidal motile of ${\omega}_i\;=\;{\\omega}_O$ sin ($n{\pi}x/L$). Several numerical examples were tested considering symmetric initial deflection when the maximum initial deflection at the apex is fixed as L/1000. The analysis resluts showed that the maximum deflection at the apex of arch was occurred when 70% of arch span was loaded. The maximum deflection at the quarter point of arch span was occurred when 50% of arch span was loaded. It is known that the optimal rise to span ratio between 0.2 and 0.3 when the vertical or radial distributed load is applied. It is verified that the influence of initial deflection of radial load case is more serious than that of vertical load case.

Direct Position Determination of Coherently Distributed Sources based on Compressed Sensing with a Moving Nested Array

  • Yankui, Zhang;Haiyun, Xu;Bin, Ba;Rong, Zong;Daming, Wang;Xiangzhi, Li
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권5호
    • /
    • pp.2454-2468
    • /
    • 2019
  • The existing direct position determinations(DPD) for coherently distributed(CD) sources are mostly applicable for uniform linear array(ULA), which result in a low degree of freedom(DOF), and it is difficult for them to realize the effective positioning in underdetermined condition. In this paper, a novel DPD algorithm for coherently distributed sources based on compressed sensing with a moving nested array is present. In this algorithm, the nested array is introduced to DPD firstly, and a positioning model of signal moving station based on nested array is constructed. Owing to the features of coherently distributed sources, the cost function of compressed sensing is established based on vectorization. For the sake of convenience, unconstrained transformation and convex transformation of cost functions are carried out. Finally, the position coordinates of the distribution source signals are obtained according to the theory of optimization. At the same time, the complexity is analyzed, and the simulation results show that, in comparison with two-step positioning algorithms and subspace-based algorithms, the proposed algorithm effectively solves the positioning problem in underdetermined condition with the same physical element number.

Zoogeography of Taiwanese Fishes

  • Nakabo, Tetsuji
    • 한국어류학회지
    • /
    • 제21권4호
    • /
    • pp.311-321
    • /
    • 2009
  • Three categories (freshwater, amphidromous, and marine fishes) of Taiwanese fishes are analyzed on the basis of zoogeographic elements, viz. China element, Indo-China element, Indo-West Pacific element, Indo-Pacific element, North-Pacific element, Japan-Oregon element, and circumtropical element. Freshwater fishes, which include the China and Indo-China elements, are distributed on part of the boundary area between the Palaearctic and Oriental regions of Wallace (1876). Diadromous fishes include the North-Pacific, Indo-China and Indo-West Pacific elements. Taiwanese salmon, a landlocked (initially diadromous) species that became established in Taiwan between 0.5 my B.P. and the early Pleistocene, is recognized as a distinct taxon included within the Oncorhynchus masou complex, which comprises here three species and two subspecies, viz. Oncorhynchus masou masou (Sancheoneo, Songeo, Sakura-masu or Yamame), O. masou ishikawae (Satsuki-masu or Amago), O. sp. (Biwa-masu), and O. formosanus (Taiwanese salmon), based on molecular, morphological and biological studies. Marine fishes are discussed under the following headings, brackish-water fishes (fishes of brackish waters and seas adjacent to continental coastlines, North Pacific and Indo-West Pacific elements; fishes of brackish waters and seas primarily around islands, Indo-West Pacific element), reef fishes (fishes of inshore reefs along continental coastlines from 0 to ca.100 m depth, Indo-West Pacific element; fishes of inshore reefs primarily around islands from 0 to ca.100 m depth, Indo-West Pacific element; fishes of offshore reefs along continental shelf edges from ca.150 to 300 m depth, circumtropical and Indo-Pacific elements; fishes of offshore reefs primarily around islands from ca.150 to 300 m depth, Indo-Pacific element), demersal fishes (fishes on continental shelves shallower than ca.150 m depth, Indo-West Pacific and Japan-Oregon elements; fishes on edges and upper continental slopes from ca.150 m to 500 m depth, Indo-West Pacific, Indo-Pacific, and circumtropical elements; fishes on lower continental slopes to abyssal plains from ca.500 m to 6,000 m depth, circumtropical element and rarely Indo-Pacific element), pelagic fishes (epipelagic fishes from 0 to ca.150 m depth, Indo-West Pacific, Indo-Pacific or circumtropical elements; meso- and bathypelagic fishes from ca.150 to 3,000 m depth, circumtropical element). The distribution of Taiwanese marine fishes are influenced by the Kuroshio Current, low-salinity and low-temperature waters from mainland China, and sea-bottom topography.