• 제목/요약/키워드: Distributed mode

검색결과 562건 처리시간 0.024초

DFB 레이저의 빔 분포 시뮬레이션과 검정 (Simulation and Examination for Beam Profile of DFB Laser)

  • 권기영;기장근
    • 한국소프트웨어감정평가학회 논문지
    • /
    • 제15권1호
    • /
    • pp.71-78
    • /
    • 2019
  • 광대역 광통신 시스템에 사용되는 레이저는 우수한 주파수 선택성과 모드 안정성을 가져야한다. DFB(Distributed Feedback) 레이저는 고주파로 전류 변조를 하더라도 발진 주파수의 변화가 적다. 본 연구에서는 무반사 코팅을 하지 않은, 두 거울 면을 가진 1.55um의 파장을 갖는 DFB 레이저에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 시뮬레이션 소프트웨어를 개발하여 종 방향으로의 발진 모드의 빔 분포를 해석하였다. 굴절률 격자와 이득 격자가 거울 면에서 갖는 위상 값의 변화에 따라서 DFB 레이저의 발진 모드에 대한 빔 분포 |R(z)|와 |S(z)|, 그리고 방사전력비 Pl/Pr를 비교 검증하였다. 거울 면에서의 격자 위상에 관계없이 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

광섬유 브래그 격자 센서가 있는 광섬유 라인에 라만 OTDR을 이용한 분포 온도 및 변형률 측정 가능성에 대한 연구 (Measurement of Distributed Temperature and Strain Using Raman OTDR with a Fiber Line Including Fiber Bragg Grating Sensors)

  • 권일범;변종현;전민용
    • 비파괴검사학회지
    • /
    • 제36권6호
    • /
    • pp.443-450
    • /
    • 2016
  • 한 개의 감지 광섬유 라인으로 분포 온도와 몇 개의 변형률을 측정할 수 있는 새로운 광섬유 센서 연구를 수행하였다. 분포 온도는 감지 광섬유의 라만 안티-스토크스 산란광을 시간영역 반사계(OTDR: optical time domain reflectometry)로 측정하고, 변형률은 광섬유 브래그 격자(FBG: fiber Bragg grating)를 사용하여 측정하였다. 분포 온도는 4 km의 단일 모드 광섬유의 감지 광섬유로부터 안티-스토크스 후방 산란광을 양방향에서 취득하고 새로이 고안된 수식으로 온도를 계산하였다. 온도 실험은 감지 광섬유의 중간쯤에서 약 50 m의 광섬유 부분의 온도를 $30^{\circ}C$부터 $70^{\circ}C$까지 $10^{\circ}C$ 간격으로 변화시키면서 실험한 결과 온도 측정 오차 범위는 $0.50^{\circ}C$이하로 확인되었다. 또한 감지 광섬유에 설치된 FBG는 변위 스테이지로 변형시키고 파장 변화를 광학 스펙트럼 분석기로 측정한 결과 각각 0.10 nm, 0.17 nm, 0.29 nm, and 0.00 nm를 얻었다. 이러한 파장 이동은 각각 $85.76{\mu}{\epsilon}$, $145.55{\mu}{\epsilon}$, $247.86{\mu}{\epsilon}$, $0.00{\mu}{\epsilon}$에 해당되었다.

저 전류 및 고 효율로 동작하는 양자 우물 매립형 butt-coupled sampled grating distributed bragg reflector laser diode 설계 및 제작 (Design and Fabrication of butt-coupled(BT) sampled grating(SG) distributed bragg reflector(DBR) laser diode(LD) using planar buried heterosture(PBH))

  • 오수환;이철욱;김기수;고현성;박상기;박문호;이지면
    • 한국광학회지
    • /
    • 제15권5호
    • /
    • pp.469-474
    • /
    • 2004
  • 본 논문에서는 저 전류 및 고 효율로 동작하는 planar buried heterostructure(PBH) 구조로 sampled grating(SG) distributed bragg reflector(DBR) laser diode(LD)를 처음으로 설계하고 제작하였다. 특히 활성층과 도파로층의 높은 결합 효율을 얻기 위해 건식 식각과 습식 식각을 같이 사용하여 결함이 거의 없는 butt-coupling(BT) 계면을 형성하였다. 제작된 파장 가변레이저의 평균 발진 임계전류는 약 12 mA로 ridged waveguide(RWG)와 buried ridge stripe(BRS) 구조로 제작된 결과 보다 두 배 정도 낮게 나타났으며, 광 출력은 200 mA에서 약 20 mW 정도로 RWG 와 BRS 보다 각각 9 mW, 13 mW 더 우수하게 나타났다. 그리고 파장 가변 영역을 측정한 결과 44 nm로 설계결과와 일치하였으며, 최대 파장 가변 영역 안에서 출력 변화 폭이 5 dB 이내로서 RWG 구조의 9 dB보다 출력변화 폭이 4 dB 적게 나타났다. 전체 파장 가변 영역에서 SMSR이 35 dB 이상으로 나타났다.

양 단면 반사율 조합과 결합 계수 비에 따른 Complex-Coupled DFB 레이저 다이오드의 파워 추출 효율과 발진 파장 분포 (Power extraction efficiency and lasing wavelength distribution of complex-coupled DFB lasers for various facet reflectivity combinations and coupling coefficient ratios)

  • 김상택;김부균
    • 한국광학회지
    • /
    • 제15권2호
    • /
    • pp.149-157
    • /
    • 2004
  • 문턱 전류 이상에서 complex-coupled(CC) DFB 레이저의 여러 가지 |$\chi$L|과 양 단면 반사율 조합에 대하여 파워 추출 효율과 발진 파장 분포를 구하였고 문턱 전류에서의 결과와 비교하였다. 또한 결함 계수 비(CR)와 Ar 단면의 반사율이 파워 추출 효율과 발진 파장 분포에 미치는 영향에 대하여 살펴보았다. 문턱 전류에서 in-phase(IP) CC DFB 레이저와 anti-phase(AP) CC DFB 레이저의 파워 추출 효율에 대하여 도시한 단일 모드 수율은 정확히 일치하였다. 그러나 문턱 전류 이상에서는 IP CC DFB 레이저의 파워 추출에 대하여 도시한 단일 모드 수율은 AP CC DFB 레이저보다 크게 나타났다. IP CC DFB 레이저의 경우 양 단면 반사율 조합이 AR-HR의 경우가 다른 반사율 조합에 비해 단일 모드 수율이 크고 또한 파워 추출 효율이 큼을 알 수 있었다. 본 논문에서 고려한 경우 중에서 |$\chi$L|이 0.8이고 AR-HR인 경우가 문턱 전류 이상에서 단일 모드 수율과 파워 추출 효율이 가장 컸다. 양 단면 반사율 조합이 AR-HR인 경우 CR이 커질수록, AR단면의 반사율이 작아질수록 spatial hole burning 현상이 완화되어 단일 모드 수율과 파워 추출 효율이 커졌다. 양 단면 반사율 조합이 AR-HR인 경우 CC DFB 레이저의 발진 파장은 DFB 금지 대역 내에 넓게 분포하였다. CR이 증가할수록 IP CC DFB 레이저는 장파장 모드에, AP CC DFB 레이저는 단파장 모드에 발진 파장 분포가 증가하였다. |$\chi$L|이 커질수록 발진 파장이 존재하는 파장 폭이 작아 지고 발진 파장 분포가 장파장 쪽으로 이동하였다.

Federated Information Mode-Matched Filters in ACC Environment

  • Kim Yong-Shik;Hong Keum-Shik
    • International Journal of Control, Automation, and Systems
    • /
    • 제3권2호
    • /
    • pp.173-182
    • /
    • 2005
  • In this paper, a target tracking algorithm for tracking maneuvering vehicles is presented. The overall algorithm belongs to the category of an interacting multiple-model (IMM) algorithm used to detect multiple targets using fused information from multiple sensors. First, two kinematic models are derived: a constant velocity model for linear motions, and a constant-speed turn model for curvilinear motions. Fpr the constant-speed turn model, a nonlinear information filter is used in place of the extended Kalman filter. Being equivalent to the Kalman filter (KF) algebraically, the information filter is extended to N-sensor distributed dynamic systems. The model-matched filter used in multi-sensor environments takes the form of a federated nonlinear information filter. In multi-sensor environments, the information-based filter is easier to decentralize, initialize, and fuse than a KF-based filter. In this paper, the structural features and information sharing principle of the federated information filter are discussed. The performance of the suggested algorithm using a Monte Carlo simulation under the two patterns is evaluated.

3상 4선식 배전계통에서 단상 능동필터를 이용한 중성선 전류의 보상 (Neutral Current Compensation Using Single Phase Active Power Filter in Three-Phase Four-Wire Electric Distribution Systems)

  • 최시영;김병섭;송종환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 B
    • /
    • pp.1046-1048
    • /
    • 2002
  • The increase of triplen harmonics in three-phase four-wire systems leads to overloaded neutral conductor, common-mode noise problems, derating of transformers, and so on. Various compensator has been designed to prevent the problems associated with the triplen harmonics. But these can not protect distribution system effectively because the triplen harmonic source is distributed extensively and distribution system type is diverse. This paper explain the operation and installation of single phase active power filter to eliminate triplen harmonics and then it is verified by simulation.

  • PDF

Removal of Complexity Management in H.263 Codec for A/VDelivery Systems

  • Jalal, Ahmad;Kim, Sang-Wook
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2006년도 학술대회 1부
    • /
    • pp.931-936
    • /
    • 2006
  • This paper presents different issues of the real-time compression algorithms without compromising the video quality in the distributed environment. The theme of this research is to manage the critical processing stages (speed, information lost, redundancy, distortion) having better encoded ratio, without the fluctuation of quantization scale by using IP configuration. In this paper, different techniques such as distortion measure with searching method cover the block phenomenon with motion estimation process while passing technique and floating measurement is configured by discrete cosine transform (DCT) to reduce computational complexity which is implemented in this video codec. While delay of bits in encoded buffer side especially in real-time state is being controlled to produce the video with high quality and maintenance a low buffering delay. Our results show the performance accuracy gain with better achievement in all the above processes in an encouraging mode.

  • PDF

Bidirectional Hybrid DWDM-PON for HDTV/Gigabit Ethernet/CATV Applications

  • Lu, Hai-Han;Tsai, Wen-Shing;Chien, Tzu-Shen;Chen, Shih-Hung;Chi, Yu-Chieh;Liao, Che-Wei
    • ETRI Journal
    • /
    • 제29권2호
    • /
    • pp.162-168
    • /
    • 2007
  • A new scheme for bi-directional HDTV/Gigabit Ethernet/CATV transmission over a hybrid dense-wavelength-division-multiplexing passive optical network (DWDM-PON) is proposed and demonstrated. It is based on injection-locked vertical-cavity surface-emitting lasers and distributed-feedback laser diodes as transmitters. Services with 129 HDTV channels, a 1.25 Gbps Gigabit Ethernet connection, and 77 CATV channels are successfully demonstrated over 40 km single-mode fiber links. Good performance of bit error rate, carrier-to-noise ratio, composite second order, and composite triple beat is achieved in our proposed bidirectional DWDM-PON.

  • PDF

광대역 무선 네트워크의 성능 향상을 위한 분산 다중 안테나 기반 전송 프로토콜의 설계 및 분석 (Design & analysis of transmission protocol for exploiting cooperative MIMO in broadband wireless networks)

  • 류현석;강충구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.15-18
    • /
    • 2005
  • Cooperative diversity is a transmission technique, in which multiple terminals pool their resources to form a virtual antenna array that realizes spatial diversity gain in a distributed fashion. In this paper, we propose a new type of cooperative transmission protocol with a full rate and show that its BER performance is improved by 8dB over the existing protocol under the AF (amplify-and-forward) mode of relaying.

  • PDF

재질이 주기적으로 불균일한 보의 굽힘 진동 해석 (Flexural Vibration of a Bar with Periodically Nonuniform Material Properties)

  • 김진오;문병환;김준태
    • 한국음향학회지
    • /
    • 제18권3호
    • /
    • pp.73-78
    • /
    • 1999
  • 본 논문은 재질의 물성치가 주기적으로 불균일한 탄성보의 굽힘 진동에 관한 이론적 결과를 제시한다. 굽힘강성과 밀도의 조화함수적 변화에 대한 섭동기법에 의해 고유진동수와 모드형상의 근사해를 구하였다. 유한요소법에 의한 수치해로써 근사해의 경향을 검증하였다. 해석결과 저차모드에서도 분할된 분포진동모드가 공존하고 있으며 이러한 접근방법을 확장하여 평판스피커용 불균일 평판의 진동해석에 적용할 수 있음이 확인되었다.

  • PDF