• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.740-746
• /
• 2005

In this article, we report the tandem mass spectrometry investigations for the electron capture efficiencies of the protons belonging to the different locations (generations) in a poly(propylene imine) dendrimer with three layers of a repeat unit (named as the third generation dendrimer). The employed tandem mass spectrometry methods include SORI-CAD (sustained off-resonance irradiation collisional activation dissociation) and ECD(electron capture dissociation) mass spectrometry. We obtained SORI-CAD spectra for the dendrimer ions in the different charge states, ranging from 2+ to 4+. The analysis of fragmentation sites provides the information as to where the protons are distributed among various generations of the dendrimer. Based upon this, a new strategy to study the electron capture efficiencies of the protons is utilized to examine a new type of triplycharged ions by SORI-CAD, i.e., the 3+ ions generated from the charge reduction of the native 4+ ions by ECD: (M+4H)$^{4+}\;+\;e^-\;{\rightarrow}$ (M+4H)$^{3+\bullet}$ ${\rightarrow}\;({H^{\bullet}}_{ejected}$) + (M+3H)$^{3+}\;\rightarrow$ CAD. Interestingly, comparison of these four SORICAD spectra indicates that the proton distribution in the charge-reduced 3+ ions is very close to that in the native 4+ ions. It further suggests that in this synthetic polymer ($\sim$1.7 kDa) with an artificial architecture, the electron capture efficiencies of the protons are actually insensitive to where they are located in the molecule. This is somewhat contradictory to common expectations that the protons in the inner generations may not be well exposed to the incoming electron irradiation as much as the outer ones are, thus may be less efficient for electron capture. This finding may carry some implications for the case of medium sized peptide ions with similar masses, which are known to show no obvious site-specific fragmentations in ECD MS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.89-95
• /
• 2008

The introduction of wireless information technology gives rise to new mobile services in all kinds of areas of out daily life. Mobile healthcare system is a production of composite ICT (Information and Communication Technology) which focused on signal sensing, processing, and communication in wireless environment. The mobile and wireless revolution promises not only expanded access to patient health information, but also improved patient care. In this paper, we describe a surrogate host based mobile healthcare information system which utilized Grid computing for real-time ECG signal processing. The surrogate host provides seamless interface between mobile device and Medical Grid portal. The security extension of GSI (Grid Security Infrastructure) allows mobile users to access Grid portal in a secure and convenient manner. The presented system architecture can be used as a secure enterprise mobile healthcare system for hospital physicians.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3474-3497
• /
• 2016

Network Function Virtualization (NFV) and Software Defined Networking (SDN) are recently considered as very promising drivers of the evolution of existing middlebox services, which play intrinsic and fundamental roles in today's networks. To address the virtual service deployment issues that caused by introducing NFV or SDN to networks, this paper proposes an optimal solution by combining quantum genetic algorithm with cooperative game theory. Specifically, we first state the concrete content of the service deployment problem and describe the system framework based on the architecture of SDN. Second, for the service location placement sub-problem, an integer linear programming model is built, which aims at minimizing the network transport delay by selecting suitable service locations, and then a heuristic solution is designed based on the improved quantum genetic algorithm. Third, for the service amount placement sub-problem, we apply the rigorous cooperative game-theoretic approach to build the mathematical model, and implement a distributed algorithm corresponding to Nash bargaining solution. Finally, experimental results show that our proposed method can calculate automatically the optimized placement locations, which reduces 30% of the average traffic delay compared to that of the random placement scheme. Meanwhile, the service amount placement approach can achieve the performance that the average metric values of satisfaction degree and fairness index reach above 90%. And evaluation results demonstrate that our proposed mechanism has a comprehensive advantage for network application.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.49-57
• /
• 2019

Recently, the use of deep deck plate has been increased in various structures, such as underground parking lots, logistics warehouses, because it can reduce construction periods and labor costs. In this study, a newly developed Double Deck (D-deck) plate which can leads to save story heights has been introduced, and experimental tests on a total of five D-deck plates under construction loads have been carried out to investigate their structural performance at construction stage. The loads were applied by sands and concrete to simulate the actual distributed loading conditions, and the vertical deflection of D-Deck and the horizontal deformation of web were measured and analyzed in detail. As a result, it was confirmed that all the D-decks showed very small vertical deflection of less than 5.34 mm under construction loads, which satisfies the maximum deflection limit of L / 180. In addition, the D-Deck plate was found to have a sufficient rigidity to resist construction loads in a stable manner.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.3
• /
• pp.33-44
• /
• 2017

This study investigated in the vascular plants of special protection zones (the native land of Berchemia berchemiaefolia in Sadam-ri and Gallon valley) of Songnisan National Park and identified the whole vascular plants. The numbers of vascular plants were summarized as 273 taxa including 82 families, 182 genera, 236 species, 3 subspecies, 28 varieties and 6 forms. Woody plants were identified as 124 taxa (45.4%) and herbaceous plants as 149 taxa (54.6%). A total of 107 taxa were identified in the area of Sadam-ri, and 246 taxa were found in the Gallon valley. A total of 8 taxa of rare plants were identified, each of which was divided into 1 taxa of endangered (EN; Daphne pseudomezereum var. koreana), 3 taxa of vulnerable (VU; Paeonia japonica, Berchemia berchemiaefolia and Iris minutiaurea), 3 taxa of least concern (LC; Aristolochia contorta, Syringa patula var. kamibayshii and Goodyera schlechtendaliana) and 1 taxa of data deficient (DD; Alangium platanifolium). The Korean endemic plants were 9 taxa (Clematis trichotoma, Thalictrum actaefolium var. brevistylum, Aster koraiensis, Cirsium setidens, etc.). In the specific plants by floristic region were 34 taxa, a degree I were 17 taxa (Chloranthus japonicus, Celastrus stephanotifolius, etc.), 9 taxa of a degree II (Euonymus pauciflorus, Acer triflorum, etc.), 4 taxa of a degree III (Aconitum longecassidatum, Angelica gigas, etc.), 2 taxa of a degree IV (Ulmus macrocarpa and Daphne pseudomezereum var. koreana), 2 taxa of a degree V (Berchemia berchemiaefolia and Alangium platanifolium). The naturalized plants were 5 taxa including Fallopia dumetorum, Trifolium repens, Ailanthus altissima, Oenothera biennis, Erigeron annuus. Naturalization rate (NR) was 1.8% of all 273 taxa of vascular plants and the invasive alien plants were not found. The purpose of this study is to identify the flora that grows in the special protection zones of Songnisan National Park and provide the basic data for the management of the special protection zone in the future.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.4
• /
• pp.418-428
• /
• 2017

In offshore area, newly deposited Quaternary loose seabed soils are widely distributed. There are a great number of offshore structures has been built on them in the past, or will be built on them in the future due to the fact that there would be no very dense seabed soil foundation could be chosen at planed sites sometimes. However, loosely deposited seabed foundation would bring great risk to the service ability of offshore structures after construction. Currently, the understanding on wave-induced liquefaction mechanism in loose seabed foundation has been greatly improved; however, the recognition on the consolidation characteristics and settlement estimation of loose seabed foundation under offshore structures is still limited. In this study, taking a semi-coupled numerical model FSSI-CAS 2D as the tool, the consolidation and settlement of loosely deposited sandy seabed foundation under an offshore breakwater is investigated. The advanced soil constitutive model Pastor-Zienkiewics Mark III (PZIII) is used to describe the quasi-static behavior of loose sandy seabed soil. The computational results show that PZIII model is capable of being used for settlement estimation problem of loosely deposited sandy seabed foundation. For loose sandy seabed foundation, elastic deformation is the dominant component in consolidation process. It is suggested that general elastic model is acceptable for subsidence estimation of offshore structures on loose seabed foundation; however, Young's modulus E must be dependent on the confining effective stress, rather than a constant in computation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.743-754
• /
• 2014

Recently, Information-Centric Networking(ICN), different from traditional IP-based networking, has been highlighted. Content-Centric Networking(CCN), proposed by Van Jacobson, is a representative scheme of the ICN architectures. It can deliver messages slightly faster than the IP-based networking by focusing on the access and delivery to the content itself. However, CCN is restricted to distribute the information without transmitting the request packet in advance because it is pull-based architecture by content requester. In addition, it has a problem that the Pending Interest Table(PIT) could be overloaded easily when DDoS attack happens. In this paper, we suggest an algorithm using a push-based scheme without request packets and overcoming PIT overload situation by Interest Group Push Table(IGPT). The proposed scheme enables to transmit a large amount of content than an existing scheme during the same amount of time in terms of timely-delivery and security.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.33-46
• /
• 1999

In distributed computing platforms like CORBA, wrappers are used to integrate heterogeneous systems or databases. A spatial data provider is one of the wrappers because it provides clients with uniform access interfaces to diverse data sources. The individual implementation of spatial data providers for each of different data sources is not efficient because of redundant coding of the wrapper modules. This paper presents a new architecture of the spatial data provider which consists of two layered objects : independent wrapper components and dependent wrapper components. Independent wrapper components would be reused for implementing a new data provider for a new data source, which dependent wrapper components should be newly coded for every data source. This paper furthermore discussed the issues of implementing the representation of query results in the middleware. There are two methods of keeping query results in the middleware. One is to keep query results as non-CORBA objects and the other is to transform query results into CORBA objects. The evaluation of the above two methods shows that the cost of making CORBA objects is very expensive.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.2
• /
• pp.1-6
• /
• 2002

In this paper, an Analog Flat Panel interface(AFPI) which supports for UXGa(Ultar extended Graphics Array)-Compatible TFT LCD Driver is designed. The Proposed AFPI is composed of 8-b ADC, Automatic Gain Control(AGC), Low-Jitter PLL. In order to obtain a high speed and low power consumption, an efficient architecture of 8-bit ADC is proposed, whose FR(Folding Rate) is 8, NFB(Number of Folding Block) is 2, and IR (Interpolating Rate) is 16. We can get high SNDR by adopting distributed track and hold circuits. Also a programmable AGC which is possible to control gain and clamp, and a low-jitter PLL are proposed. The chip has been fabricated with 0.25${\mu}{\textrm}{m}$ 1-poly S-metal n-well CMOS technology. The effective chip area is 3.6mm $\times$ 3.2mm and it dissipates about 602㎽ at 2.5V power supply. The INL and DNL are within $\pm$ 1LSB. The measured SNDR is about 43㏈, when the input frequency is 10MHz at 200MHz clock frequency.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.597-604
• /
• 2004

This work involves quantitatively investigating the correlation between reductions in strength and variations in pore structure under high temperature that can be utilized as estimation for predicting the inner temperature of member damaged by fire. The experimental results were remarkedly affected by micro-filling effect of silica fume and the different water-binder ratios. The increase of the exposure temperature caused the increase of porosity, which resulted from the reason that evaporable water in gel pore or capillary pores as well as chemically bound water was eliminated from hardened cement paste due to the dehydration of C-S-H and $Ca(OH)_2$. Thermal shrinkage of hardened cement paste gives rise to micro-crack, which cause the increase of porosity. Based on the experimental result that the increase of porosity is in charge of exposure temperature, how porosity is distributed can predict temperature-time history and assess the performance of concrete damaged by fire.