• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.97-100
• /
• 1992

The Degradation mechanism of the ZnO-varistor fabricated with the content of a 3-Composition seed grain is discussed using the method of Thermally Stimulated Current (TSC). The spectra of TSC is measured in the temperature range of -130～270$^{\circ}C$ with a various forming electric fields E$\sub$f/, temperature T$\sub$f/ time tf, and a various rising rate of temperature. It is observed that there are appeared the peaks of ${\alpha}$, ${\alpha}$$_2$, ${\beta}$ and ${\gamma}$from high temperature in a TSC spectrum. It seems that ${\alpha}$$_1$ peak is due to thermal depolarization of donor ions forming the space charge in the depletion layer, and ${\alpha}$$_2$peak is due to the detrapping of trapped electrons in deep trap level of intergranular layer, and ${\beta}$ peak is due to the thermal exciting of carrier existing in the donor level of grain itself, and ${\gamma}$ peak is due to the thermal exciting of trapped carrier in all shallow trap site randomly distributed in the inner of sample and/or a intrinsic impurity existing in it.

• Current Photovoltaic Research
• /
• 제3권1호
• /
• pp.1-4
• /
• 2015

In this study, we analyzed the correlation between mechanical and electrical properties of low-temperature conductive film (LT-CF) bonded silicon solar cells by a quadrant analysis (horizontal axis (peeling strength), vertical axis (power loss)). We found that a series of points with various bonding parameters such as bonding temperature, pressure and time were distributed in the different three regimes; weak regime (Q2: weak bonding strength and high power loss), moderate regime (Q4 : strong bonding strength and low power loss) and hard regime (Q3 : weak bonding strength and low power loss). Using this analogous technique, it was possible to fabricate the LT-CF bonded silicon solar cells with the various conditions displayed in Q3 of the quadrant plots, possessing the peeling strength of ~ 1N/mm and power loss of 2~3%.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.385-392
• /
• 1997

The main objective of this study is to investigate the microstructure and tensile strength of $SiC_p$/Al alloy composites fabricated by die casting method. Die casting was performed using the preheated mold at the pouring temperature range of $620{\sim}750^{\circ}C$ under the pressure of $1,039 kgf/cm^2$. The low speed and a following high injection speed were 0.4 and 2.1 m/s, respectively. The microstructure of $SiC_p$/Al alloy composites fabricated by die casting method was found to be finer than that of composites fabricated by gravity casting. Also, SiC particulates were homogeneously distributed in refined Al matrix due to rapid solidification. The tensile strength of $SiC_p$/Al alloy composites fabricated by die casting method was found to be varied with cast temperature. The maximun tensile strength of $SiC_p$(10 vol.% and 20 vol.%)/Al alloy composites showed 380 MPa at the cast temperature of $750^{\circ}C$ and 363 MPa at the cast temperature of $700^{\circ}C$, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제37권2호
• /
• pp.63-68
• /
• 2018

Semi-dried mulberry fruit can be distributed at room temperature and maintained its chewy texture and shape. It can be used for its own itself or food materials. We develop the honey coating semi-dried mulberry fruit manufacturing method through hot air dryer. After extracting the moisture from the thawing process, honey was coated and dried. Drying time for semidried mulberry fruit was shortened by manufacturing on the day of work without going through aging process. The first the mulberry fruit juice was separated from the frozen mulberry fruit at room temperature of the laboratory or in the dryer of $60{\sim}90^{\circ}C$, then the first dried by a hot air drier at $60^{\circ}C$ for 3 to 4 h. Next, it is coated with honey, which is equivalent to 20% weight of the first dried mulberry fruit, and then the second dried at a temperature of $38^{\circ}C$ for 20 ~ 30 h. The honey coating semi-dried mulberry fruit by above method was shiny on the surface and retained its shape. The moisture content was about 15% and it was confirmed that it could be stored at room temperature.

• 한국수산과학회지
• /
• 제54권2호
• /
• pp.208-217
• /
• 2021

This study described the fishing characteristics of Pacific herring Clupea pallasii and examined the relationship between its catch and sea temperature in Korean waters from 1970 to 2019. Although the herring catch in Korean waters stayed below 1,000 tons per year from the mid-1970s to mid-1980s, the catch in the winters in the East Sea of Korea started to increase markedly after 1987-1988, when the sea surface temperature (SST) seemed to shift to a warmer regime. Since the mid-2000s, overall, herring was caught throughout the year in the East Sea and eastern South Sea of Korea, and its catch significantly increased by around 30,000 tons per year. The main fishing grounds of herring in the poor fishing years until the mid-1980s were possibly formed in the western offshore of Korea, and subsequently the fishing grounds were distributed in the eastern coast of Korea. While the standardized catch per unit effort (CPUE) for two main fisheries of herring catch was significantly correlated with the herring catch since the 2000s, there was a gradual decline since the 2010s. The herring catch in the East Sea had significant positive correlations with SSTs, but that in the West Sea had a significant negative correlation.

• 한국식품저장유통학회지
• /
• 제31권1호
• /
• pp.46-63
• /
• 2024

This study evaluated the impact of storage temperature on the quality characteristics of texturized vegetable protein (TVP). TVP was prepared by mixing defatted Daewon soybean flour at 80℃, gluten, and corn starch in a 5:3:2 ratio, which was then extruded at a screw speed of 250 rpm and a barrel temperature of 190℃ with moisture addition at 9 rpm. Subsequently, the extruded TVP was vacuum-sealed in polyethylene packaging and stored at -20℃, 0℃, and 4℃ for 9 days. Texture analysis revealed that the curing rate followed 4℃ > 0℃ > -20℃ sequence. No significant color variation was observed across the storage conditions, although water content increased at all temperatures. Notable changes were detected in moisture absorption capacity (%) and solid leaching (%), following the order of -20℃ > 0℃ > 4℃. The turbidity of the solution released during cooking varied, with the highest to the lowest sequence being -20℃ > 4℃ > 0℃, while pH levels remained neutral. Regarding free amino acids, sweetness and textural quality improved with storage across all temperatures, whereas bitterness components diminished at 4℃. The study suggests that refrigerated storage at 4℃ is a viable method for distributing TVP, which was previously distributed only in a frozen and dry state.

• Ecology and Resilient Infrastructure
• /
• 제6권1호
• /
• pp.12-22
• /
• 2019

본 연구에서는 팔당호 내 주요지점에서 수심별 연속 수리 및 수온 조사를 수행하여 팔당호의 시공간적 물순환 특성을 파악하고자 하였다. 이포보와 청평댐에서의 수온 및 방류 패턴의 차이로 인하여 팔당호 내 북한강 및 남한강 구간에서의 흐름 및 수온 변동특성이 상이하게 나타났다. 수직혼합기에는 북한강과 남한강 구간의 전 층에서 하류방향 흐름이 우세하게 나타났다. 성층형성기에 이포보 방류수의 수온이 청평댐 방류수의 수온보다 높았으며, 이로 인해 북한강 하류 구간에서 표층은 상대적으로 고온수가 위치하여 상류방향 흐름으로 배수 현상이 나타나고 수렴대가 형성되었다. 남한강 하류 구간은 중층과 저층에서 저온수가 분포하여 상류방향 흐름이 나타나고 표층과 혼합되기 어려운 이층류 구조를 나타내었다.

• 한국공간구조학회논문집
• /
• 제22권4호
• /
• pp.15-22
• /
• 2022

Micro-climate measurements and computational fluid analysis were conducted to use it as basic data for the preservation and management of the old house of Kim Myung-kwan, a traditional building that is National Folk Cultural Property No. 26. As a result of the actual measurement, the temperature and humidity are relatively evenly distributed indoors unlike outdoors, but the temperature and humidity vary depending on the time change and the installation location in the outdoors. It was found that the temperature increases after dawn and the temperature varies depending on the installation position around 14:00-15:00, when the temperature becomes the highest. In particular, the temperature was high at the outdoor measurement point adjacent to the building and the fence. As a result of the computational fluid analysis, the temperature was high in the buildings and fences in the old house or in the area adjacent to the building, and it was about 1℃ higher than the surrounding area. In this area, it is judged that the thickening of wood will occur more severely than in other locations, and special preservation management is required.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2020-2021
• /
• 2004

Distributed optical feedback by gain coupling in V-groove quantum-wire lasers is investigated using InGaAs/AlGaAs active materials grown by metalorganic chemical vapor deposition (MOCVD). In order to avoid grating overgrowth during the fabrication of DFB structures, a newly developed constant MOCVD growth method is employed. Gain anisotropy in emission spectra near Bragg wavelength, resulting from optical feedback along the DFB direction, is clearly observed at room temperature.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.82-89
• /
• 2001

This paper concerns lean gas cyclone combustion system adopting distributed inlets with different velocity to promote ignition and burnout properties. Detailed temperature measurements have been achieved under different operating conditions and flue gas compositions and NOx have been measured. Experimental results show that cyclone combustor provided increasing combustion stability and reduction NOx emission level to negligible level.