• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.268-281
• /
• 2008

It is difficult to construct streaming services based on the overlay networks without any loss of scalability. DONet is one of the most representative streaming overlay network protocols without managing any specific structure. Since DONet does not support the nodes on private networks, it can be considered that the performance of the overlay is not the best. Hole Punching is one of the famous techniques participating the nodes on private networks to streaming overlay networks by using a rendezvous server. However, using only a single rendezvous server cannot be suggested in P2P environment, because it can cause problems in terms of scalability and so on. In this paper, we propose DONet-p, an extension of DONet with Distributed Hole Punching techniques. It supports the nodes on private networks without toss of scalability. The experimental results show the better performance and scalability than DONet with a minimum overhead for additional control messages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.19-24
• /
• 2018

The IP Multimedia Subsystem(IMS) is an architectural framework for delivering IP multimedia services to mobile users. In order to guarantee the reliability and Quality of Service(QoS) of a variety of multimedia services, we need a new evolutionary approach that maintains the IMS based signaling platform which can perform the processing of flow through distributed controllers. Software Defined Network(SDN) is an architecture purporting to be distributed, dynamic, cost-effectives as well as adapting and seeking to be suitable for the high-bandwidth, dynamic nature of today's applications. It requires some methods for the control plane to communication with the data plane. One of such mechanisms is OpenFlow which is a prominent standard protocol and interface that is responsible for managing the network resources by using the remote SDN controller. In this paper, we propose a straightforward approach for integrating SDN technology together with the IMS architecture. Therefore we propose and construct a combined architecture model that performs flow processing using OpenFlow via the IMS based signaling platform, which maintains the existing telecom call service. Additionally, we describe some relevant experimentation results from the proposed architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1B
• /
• pp.1-6
• /
• 2005

Communication network is in a transition toward the NGN (Next Generation Networks) to accommodate the explosive demand of new services. The NGN allows the third-party application provisioning by defining the networks as layers of Services, Distributed Processing Environment and Transport. Especially, the Service layer can further be divided into Application and Service Component layer. In order to realize the third-party application provisioning, the Parlay Group has adopted an open Parlay API as an interface between the Application and the Service Component layer. Using Parlay API, the third parties may develop and deploy the IT-based applications at the Application layer exploiting the service components located within network operators' domain. In this paper, we present the implementation details about the Third Party Call Control (TPCC) Service using the third-party service logic based on Parlay API and Parlay X API, when SIP is used as a signaling protocol in Transport layer. Also, we compare the performance evaluation of both implementations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.84-97
• /
• 2012

In wireless sensor networks, cluster structure brings on many advantages such as load balancing, energy saving, and distributed key management, and so on. To transform a physical network into the cluster structure, sensor nodes should invoke a cluster formation protocol. During the protocol operation, if some nodes are compromised and they do not conform to the protocol, an inconsistency of membership in a cluster happen. This splits the cluster and consequently increases the number of clusters and decreases the number of members in the cluster. In this paper, we propose a scheme which well copes with such a problem. First, our scheme generates two hop clusters where hop distance between any two nodes is at most two. Besides, our scheme employs verification of two hop distant nodes to prevent the cluster split induced by compromised nodes. Last, our scheme mainly employs broadcast transmissions to reduce energy consumption of nodes. Simulation results have proven that our scheme reduces the number of clusters and more secure and energy-efficient than other scheme.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.17-26
• /
• 2003

Mobile agent system comes into the spotlight since it contributes largely to mobile computing on distributed network environment. However, this system has a number of significant security Problems. In this Paper, we analyze suity attacks to mobile agent system Presented by NIST[3]. In order to protect this system from them, we suggest a security protocol for mobile agent system by employing R based key distribution and digital multi-signature scheme. To solve these problems described in NIST, securities for mobile agent and agent platform shouid be accomplished. Comparing with other protocols, our protocol performs both of these securities, while other protocols mentioned only one of them. Proposed Protocol satisfies simplicity of key management, providing security service such as confidentiality, integrity, authentication and preventing reputation, liveness guarantee, protection of excution-result data and preventing replay attack. Furthermore, it is designed to detect message modification immediately by verifying each step of agent execution at a corresponding server.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.71-76
• /
• 2003

Internet traffic is getting tremendously heavier due to the exponential growth of the Internet users, the spread of the E-commerce and the network games. High-speed routers for fast packet forwarding are commercially available to satisfy the growing bandwidth. A high-speed router, which has the decentralized multiprocessing architecture for IP and routing functions, consists of host processors, line interfaces and switch fabrics. In this paper, we propose a software architecture tuned for high-speed non-forwarding packet manipulation. IPCMP (Inter-Processor Communication Message Protocol), which is a mechanism for IPC (Inter-Processor Communication), is also proposed and implemented as well. Proposed IPC mechanism results in faster packet-processing rate by 10% as compared to the conventional IPC mechanism using UDP/IP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.76-82
• /
• 2019

The development of Internet technology and the deployment of smart devices provide a convenient environment for people, and this is becoming common with the technology called the Internet of Things (IoT). But the development of, and demand for, IoT technology is causing various problems, such as personal information leaks due to the attacks of hackers who exploit it. A number of devices are connected to a network, and network attacks that have been exploited in the existing PC environment are occurring in the IoT environment. When it comes to IP cameras, security incidents (such as distributed denial of service [DDoS] attacks, hacking someone's personal information, and monitoring without consent) are occurring. However, it is difficult to install and implement existing security solutions because memory space and power are limited owing to the characteristics of small devices in the IoT environment. Therefore, this paper proposes a security protocol that can look at and prevent IoT security threats. A security assessment verified that the proposed protocol is able to respond to various security threats that could arise in a network. Therefore, it is expected that efficient operation of this protocol will be possible if it is applied to the IoT environment.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2009

The sensor nodes that form a wireless sensor network must perform both routing and sensing roles, since each sensor node always has a regular energy drain. The majority of sensors being used in wireless sensor networks are either unmanned or operated in environments that make them difficult for humans to approach. Furthermore, since many wireless sensor networks contain large numbers of sensors, thus requiring the sensor nodes to be small in size and cheap in price, the amount of power that can be supplied to the nodes and their data processing capacity are both limited. In this paper, we proposes the WSN(Wireless Sensor Network) algorithm which is applied sensor node that has low power consumption and efficiency measurement. Moreover, the efficiency routing protocol is proposed in this paper. The proposed algorithm reduces power consumption of sensor node data communication. It has not researched in LEACH(Low-Energy Adaptive Clustering Hierarchy) routing protocol. As controlling the active/sleep mode based on the measured data by sensor node, the energy consumption is able to be managed. In the event, the data is transferred to the local cluster head already set. The other side, this algorithm send the data as dependent on the information such as initial and present energy, and the number of rounds that are transformed into cluster header and then transferred. In this situation, the assignment of each node to cluster head evenly is very important. We selected cluster head efficiently and uniformly distributed the energy to each cluster node through the proposed algorithm. Consequently, this caused the extension of the WSN life time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2B
• /
• pp.105-116
• /
• 2003

The differentiated service architecture is based on a simple model by applying a per-class service in the core node of the network. However, due to the simplified network behavior, the network structure and provisioning were more complicated. If a service provider wants the dynamic provisioning or better bandwidth guarantee, signaling protocol with QoS parameters or admission control method should be deployed in DiffServ network. However, these methods increase the complexity. Therefore, we proposed DPM2 mechanism for admission control in the DiffServ network. In this paper, we describe and survey the admission control methods that are applicable to IP networks and propose also the dynamic provisioning mechanism based on the bandwidth broker and distributed measurement based admission control and movable boundary bandwidth management to support heterogeneous QoS services in differentiated service networks. For the performance evaluation for proposed mechanism, we used ns-2 simulator.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.659-672
• /
• 2004

A Mobile Ad hoc Network (MANET) is a group of independent mobile computing nodes that consist of a multi-hop wireless network without a central administration or any infrastructure. Every node that wants to join a MANET must obtain an address for communication. Having a centralized DHCP server that provides addresses to nodes, we can easily and automatically obtain addresses. However, a MANET lacks any fixed infrastructure such as a DHCP server. We therefore propose a distributed address autoconfiguration approach for a MANET using a reserved address and optimistic Duplicated Address Detection (DAD). The reserved address helps to reduce the allocation latency, and the optimistic DAD guarantees the uniqueness of addresses and lessens communication overhead. We then suggest methods of handling network partition and network merging situations, and go on to evaluate our approach through simulations. The simulation result shows that our scheme guarantees the uniqueness of allocated address and considerably improves allocation latency and communication overheads.