• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.230-239
• /
• 2003

In this paper, we propose a framework to study how to route packets efficiently in multipath communication networks. Two traffic congestion control techniques, namely, flow assignment and packet scheduling, have been investigated. The flow assignment mechanism defines an optimal splitting of data traffic on multiple disjoint paths. The resequencing delay and the usage of the resequencing buffer can be reduced significantly by properly scheduling the sending order of all packets, say, according to their expected arrival times at the destination. To illustrate our model, and without loss of generality, Gaussian distributed end-to-end path delays are used. Our analytical results show that the techniques are very effective in reducing the average end-to-end path delay, the average packet resequencing delay, and the average resequencing buffer occupancy for various path configurations. These promising results can form a basis for designing future adaptive multipath protocols.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.11a
• /
• pp.101-106
• /
• 2010

As a part of preparing the sniffing attack, this routing method presented in this thesis decreases the risk rates of the leaking of information through separating valid data and transmitting by a multi-path. then data is transmitted from start node to destination node on distributed sensor network. The level of reduction in leaking of information by the sniffing attack is proved by experimental result thich compare the case described above with the case of transmitting whole data with the single path by simulation, and the algorithm for choosing the routing path is showed by proof of the theorem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.24-34
• /
• 1994

In most computer networks, each node needs to have correct routing information for finding shortest paths to forward data packets. In a distributed environment, however, it is very difficult to keep consistent routing information throughout the whole network at all times. The presence of out-dated routing information can cause loop-forming which in turn causes the significant degradation of network performance. In this paper, a new class of routing algorithm for loop detection and resolution is discussed. The proposed algorithm is based on the distributed Bellman-Ford algorithm which is popularly adopted for routing in computer network. The proposed algorithm detects and resolves all kinds( two-node and multi-node) of loop in a distributed environment within finite time while maintaining the simplicity of the distributed Bellman-Ford algorithm.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.36-36
• /
• 2004

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.166-171
• /
• 2023

Efficient energy management is a very important factor in sensor networks with limited resources, and cluster techniques have been studied a lot in this respect. However, a problem may occur in which energy use of the cluster header is concentrated, and when the cluster header is not evenly distributed over the entire area but concentrated in a specific area, the transmission distance of the cluster members may be large or very uneven. The transmission distance can be directly related to the problem of energy consumption. Since the energy of a specific node is quickly exhausted, the lifetime of the sensor network is shortened, and the efficiency of the entire sensor network is reduced. Thus, balanced energy consumption of sensor nodes is a very important research task. In this study, factors for balanced energy consumption by cluster headers and sensor nodes are analyzed, and a balancing distribution clustering method in which cluster headers are balanced distributed throughout the sensor network is proposed. The proposed cluster method uses multi-hop routing to reduce energy consumption of sensor nodes due to long-distance transmission. Existing multi-hop cluster studies sets up a multi-hop cluster path through a two-step process of cluster setup and routing path setup, whereas the proposed method establishes a hierarchical cluster routing path in the process of selecting cluster headers to minimize the overhead of control messages.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.462-465
• /
• 2012

This letter proposes a new distributed scheduling scheme combined with routing to support the quality of service of real-time applications in wireless mesh networks. Next, this letter drives average end-to-end delay of the proposed scheduling scheme that sequentially schedules the slots on a path. Finally, this letter simulates the time division multiple access network for performance comparison. From the simulation results, when the average number of hops is 2.02, 2.66, 4.1, 4.75, and 6.3, the proposed sequential scheduling scheme reduces the average end-to-end delay by about 28%, 10%, 17%, 27%, and 30%, respectively, compared to the conventional random scheduling scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.751-759
• /
• 2008

Carrier Ethernet backbone network integrates distributed layer-2 based metro networks. In this networks, Multiple Spanning Tree Protocol (MSTP) has been uscd as a main routing protocol that allows multiple spanning trees in a network. A better routing protocol called IEEE802.1aq - Shortest Path Bridging (SPB) is recently proposed, that generates the shortest spanning tree per a destination node. As SPB provides a routing path per a destination node, there is no way to adapt network traffic at normal condition. If we are free from the principle of "a spanning tree per a destination node", we can achieve adaptive routing. Based on this philosophy, we propose a new spanning tree based protocol - Edge Node Divided Spanning Tree (ENDIST). ENDIST divides an edge node into sub-nodes as many as connecting links from the node and each sub-node generates a single shortest path tree based on SPB. Depending on network or nodal status, ENDIST chooses a better routing path by flow-basis. This added traffic engineering ability contributes to enhanced throughput and reduced delay in backbone networks. The simulation informs us that ENDIST's throughput under heavy load performs about 3.4-5.8 and 1.5-2.0 times compared with STP's and SPB's one respectively. Also, we verified that ENDIST's throughput corresponds to the theoretical upper bound at half of cases we investigated. This means that the proposed ENDIST is a dramatically enhanced and the close-to-perfect spanning tree based routing schemes.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.60-68
• /
• 2012

In recent years, the requirements on the high quality environment monitoring by using the sensor nodes which can handle the multimedia data in WSN have been increased. However, because the volume of multimedia data is tremendous, the limited bandwidth of a wireless channel may incur the bottleneck of a system. To solve such a problem, most of the existing distributed multi-path routing protocols based on multimedia data just focused on overcoming the limited bandwidth in order to enhance the energy efficiency and the transmission rate. However, because the existing methods can not apply a key-based technique to encrypt the multimedia data, they are very weak for the security. In this paper, we propose a secure disjointed multipath routing scheme for multimedia data transmission. Since our proposed scheme divides multimedia data(eg. image) into pixels and sends them through disjointed multipath routing, it can provide security to the whole network without using the key-based method. Our experimental results show that our proposed scheme reduces about 10% the amount of the energy consumption and about 65% the amount of the missed data packets caused by malicious nodes over the existing methods on average.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.91-105
• /
• 2010

A wireless sensor network communication technique has been broadly studied with continuous advances in ubiquitous computing environment. Especially, because the resource of the sensor node is limited, it is important to reduce the communication energy by using an energy-efficient routing protocol. The existing cluster-based routing protocols have a problem that they cannot select a cluster head efficiently by randomly choosing a head. In addition, because the existing cluster-based routing protocols do not support the large scale of network, they cannot be used for various applications. To solve the above problems, we, in this paper, propose a new cluster-based routing protocol using representative paths. The proposed protocol constructs an efficient cluster with distributed cluster heads by creating representative paths based on hop count. In addition, a new routing protocol supports multi-hop routing for data communication between a cluster member node and a cluster head as well as between cluster heads. Finally, we show that our protocol outperforms LEACH and Multihop-LEACH in terms of reliability and scalability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.125-128
• /
• 2022

As the number of online systems based on the internet gradually increases, cyber-scale attacks that interfere with the normal operation of web services are also on the rise. In particular, distributed denial-of-service attacks (DDoS) that interfere with normal web service operations are also increasing. Therefore, this paper presents an efficient DDoS attack defense technique utilizing Equal Cost Multi-Path (BGP ECMP) routing techniques in networks of Anycast type by operating PoP basis of major attack sources and describes how high-availability web services can be operated.