• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.703-705
• /
• 1999

In this paper, we introduce the direction of arrival(DOA) estimation of distributed signal based on the improved ESPRIT algorithm. Most research on the estimation of DOA has been performed based on the assumption that the signal sources are point sources. However, we consider a two-dimensional distributed signal source model using improved ESPRIT algorithm. In the distributed signal source model, a source is represented by two parameters, the azimuth angle and elevation angle. We address the estimation of the elevation and azimuth angles of distributed sources based on the parametric source modeling in the three-dimensional space with two uniform linear arrays. The array output vector is obtained by integrating a steering vector over all direction of arrival with the weighting of a distributed source density function. We also develop an efficient estimation procedures that can reduce the computational complexity. Some examples are shown to demonstrate explicity the estimation procedures under the distributed signal source model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1324-1326
• /
• 2002

This paper concerns the development of distributed interactive simulation of a road traffic system. The simulation involved models of multiple and distributed road vehicles running on different locations. The simulation system represented a traffic system as if the distributed simulation models were in the same environment. The development of the distributed road traffic simulation was based on High Level Architecture (HLA), a state-of-the-art IEEE standard for the distributed and real-time simulation. Other work concerned modeling and simulating the road vehicles and building the map database for the virtual distributed shared environment. The information used in the simulation system was only in X-axis and Y-axis as the insignificant data in the Z-axis was omitted to simplify the simulation. However, the traffic system has visualized a 3-D coordinate system. The road vehicle models were able to avoid collision. The next direction of a vehicle can be chosen from the provided choices of further paths.

• 대한전자공학회논문지SD
• /
• 제37권7호
• /
• pp.17-28
• /
• 2000

DFB(Distributed Feedback) 및 DBR(Distributed Bragg Reflector) 레이저 다이오드의 모델링에 많이 사용되는 시간 변수가 있는 결합 파동 방정식의 수치해를 효율적으로 구할 수 있는 새로운 방법을 제안 하였다. 이 방법에서는 결합 파동 방정식을 두 세트의 방정식으로 분리하여 해석한다. 한 세트의 방정식들에는 위상 인자 및 이득 인자만 포함되고, 다른 한 세트의 방정식에는 결합항만이 포함된다. 본 논문에서 SS-TDM(Split-Step Time Domain Model)이라고 명명한 새로운 수치해석법은 기존의 방법에 비하여 매시간 스텝당 계산 시간은 비슷한 반면에 분할 구간의 수가 10배 이상 적게 하여도 정확한 결과를 얻을 수 있음을 확인하였다.

• 한국전자통신학회논문지
• /
• 제1권1호
• /
• pp.20-26
• /
• 2006

최근에 급성장하고 있는 실시간 통신 분산 컴퓨팅은 최근에 컴퓨터 응용분야의 하나로서 컴퓨터 과학과 공학 분야에서 급성장하고 있는 한 분야이다. 실시간 객체 지향 분산 컴퓨팅은 분산된 컴퓨터 시스템에서 객체 네트워크의 형태로 구성된 실시간 분산 컴퓨팅이다. 본 논문에서는 TMO 구조를 이용하여 실시간 통신 시뮬레이션 프로그래밍을 하기 위해 DHS(Distributed High-Precision Simulation)라는 응용 환경에 적용하였다. TMO 구조에서 사용되는 시간 구동 및 메시지 구동 구조는 충분한 서비스를 제공하기 위해 데드라인 시간을 보장함으로서 실시간 시뮬레이션 프로그래머의 노력을 줄일 수 있는 이점을 가지고 있다. 데드라인 시간 보장은 프로그래머의 설계 시간을 처음 객체부터 적용하여 보장함으로서 형성될 수 있다. 분산된 객체지향 실시간 통신 시스템에서 TMO 구조를 이용한 다단계 프로그래밍 설계를 함으로서 실시간 통신 프로그래밍을 유연하게 작성할 수 있다.

• 한국정보통신학회논문지
• /
• 제11권5호
• /
• pp.897-905
• /
• 2007

본 논문에서는 TMO 실시간 객체 모델을 이용하여 실시간 통신 메시지 서비스를 효과적으로 지원하기 위해 새로운 프레임워크 및 동기화 메카니즘을 나타내었다. 또한 분산된 네트워크 시스템에서 TMO 구조를 이용하여 DHS(Distributed High-Precision Simulation) 응용 환경 에 적용함으로서 실시간 메시지 서 비스를 보장하였다. 분산된 다중 노드 시스템에서 TMO의 시간 구동 및 메시지 구동 구조는 실시간 통신 서비스 능력을 적시에 보장하기 위한 설계자의 노력을 충분히 줄일 수 있었으며, 제안된 프레임워크는 분산된 객체 구성요소들 사이의 데드라인 시간을 보다 쉽게 보장하기 위해 일관된 구조 및 구성을 제공하였다. 프로그래머의 데드라인 설계 시간을 처음 객체부터 적용하여 보장함으로서 형성될 수 있다. TMO 객체 모델을 기반으로 한 실시간 시뮬레이션에서 몇 가지의 TMO 구조의 장점을 가지고 있으며, TMO 객체 모델은 요구 명세서와 설계 사이의 강력한 연관성을 가지고 있다.

• 한국시뮬레이션학회논문지
• /
• 제14권1호
• /
• pp.19-32
• /
• 2005

In this study, a distributed simulation of Petri net models under HLA/RTI framework is considered. Throughout our modeling experiences, it is recognized that the proper use of interface specification and time management services are important in order to achieve successful implementation of RTI. The interfacing tokens between Petri net models are distinguished as information entity and physical entity. Both entities are modeled as InteractionClass in order to send and receive messages. For the synchronization of local simulation clocks, a conservative method with NERA service is considered. A cell manufacturing system is modeled and implemented with RTI to illustrate the distributed simulation of Petri net models.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.219-221
• /
• 1995

This paper proposes a model for simulation and performance evaluation of distributed computer systems(DCS). The model is composed of operating system(OS), resource, task, environment submodel. Task Flow Graph(TFG) is suggested to describe the relation between tasks. This paper considers task response time, the scheduler's ready queue length, utilization of each resource as performance indices. The distributed system of Continuous Annealing Line(CAL) in iron process is simulated with the proposed model.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.44-49
• /
• 2007

An agent is an abstract unit for problem solving in the field of distributed artificial intelligence, and an agent-based system is designed and implemented based on the definition of agent as its central concept. Agent modeling is advantageous to abstraction, disintegration and structuring for describing complex system, so its application is increased in various areas including air traffic control, power transmission, e-commerce and medicine. There is no agreed definition of agent but agents have common points as follows: autonomy, reactivity, pro-activeness and cooperation. An agent-oriented modeling is an approach of a concept different form existing object-oriented modeling. This study proposed the agent application for E-Beam manufacturing system. To evaluate the performance of the proposed process design, we used the JADE library. The JADE toolkit provides a FIPA-compliant agent platform and a package to develp Java agents. It provides a basic set of functionalities that are regarded as essential for an autonomous agent architecture.

• 한국국방경영분석학회지
• /
• 제31권1호
• /
• pp.42-57
• /
• 2005

Korea DM&S(Defence Modeling & Simulation) development plan includes construction of a distributed simulation model which enables us to construct, operate, integrate and connect war game simulations. US DoD and IEEE set the HLA/RTI as the standard of distributed simulation model. HLA/RTI models each simulator as a Federate and group of them as a Federation. Simulation with the model shows interoperability and finally executes a war game simulation. Because of different resolutions and features, it is not satisfied 'interoperability' and 'reusability' of simulation perfectly MRM (Multi Resolution Modeling) has been introduced, and many developed countries including the United States have studied the technology to simulate the model with different resolutions. This thesis proposes the need for introduction of MRM and analyzes both technical and operational validity when we apply MRM model to army war game simulations. For these purposes, we 1) find MRM main issues with the study about MRM basic concepts and case studies of MRM's applications, 2) present the need of MRM and its relation with DM&S development plan, and 3) analyze its technical and operational validity when we apply MRM to an example, CHANG-JO21 and JEON-TOO21.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.683-690
• /
• 2017

In the stability and sensitivity design and diagnosis approaches, there are various methodologies available. Bond graph modeling by lumping technique is one of the universal methodologies in methodical analysis used by many researchers in all over the world. The accuracy of the method is validated in different arenas. Bond graphs are a concise, pictorial representation of the energy storage, dissipation and exchange mechanisms of interacting dynamic systems, subsystems and components. This paper proposes a bond graph modeling for distributed parameter systems using lumping techniques. Therefore, a steel frame structure was modeled to analyze employing bond graph modeling of distributed system using lumping technique. In the analytical part, the effectiveness of bond graphs to model this system is demonstrated. The dynamic responses of the system were computed and compared with those computed from the finite element analysis. The calculated maximum deflection time histories were found to be comparable. The sensitivity and the stability of the steel frame structure was also studied in different aspects. Thus, the proposed methodology, with its simplicity, can be used for stability and sensitivity analyses as alternative to finite element method for steel structures. The major value brought in the practical design is the simplicity of the proposed method for steel structures.