• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1817-1823
• /
• 2009

A design of cascaded distributed amplifier with a broadband amplification is described in this paper. A medium power device with 23dBm, max output power under the optimal narrow-band power matching condition is adopted for the design and fabrication of the cascaded distributed amplifier. In general, conventional distributed amplifiers with the parallel connected input ports have a low gain, and previous cascaded distributed amplifiers show a relatively low output power of 10dBm at most, which is the upper limit of small signal amplification. However, the cascaded distributed amplifier in this paper shows the gain of $18.15{\pm}0.75dB$ and output power of 20dBm over $300MHz{\sim}2GHz$ from the measurement, so it can be well adopted as a wideband driver amplifier.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.4
• /
• pp.279-288
• /
• 2010

In this paper, a DEVS(Discrete EVent Systems Specification)-HLA(High Level Architecture) interface was developed in order to perform the simulation using the combined discrete event and discrete time simulation model architecture in a distributed environment. The developed interface connects the combined simulation model with the HLA/RTI(Run-Time Infrastructure) which is an international standard middleware for distributed simulation. The interface consists of an interface model, a model interpreter, and a distributed environment interpreter. The interface model was defined by using the combined simulation architecture in order to easily connect the existing combined simulation model without modification with the HLA/RTI. The model interpreter takes charge of data transmission between the interface model and the combined simulation model. The distributed environment interpreter takes charge of data transmission between the interface model and the HLA/RTI. To evaluate the applicability of the developed interface, it was applied to the diving simulation of a submarine in a distributed environment. The result shows that a simulation result in a distributed environment using the interface is the same to the result in a single computing environment.

• Architectural research
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2005

The needs of collaboration among design participants spread in different locations is emphasized in the early design stage in order to not only save time and provide places to meet and talk, but also to save cost for those events as well: This is being realized by the Internet, which helps support a networked, integrated real-time multi-user environment. As the base for collaboration activities moves from physical places to cyberspace, the methods of connecting every participant by means of a computer technology have been desired and considered. This study aims at investigating today's collaboration technology in the architectural design process, especially focused on the early stages, in terms of temporal dimensions. In addition, major concepts for and previous efforts and tools of collaborative design have been examined, and a specific recommendation has been proposed for future development of collaborative architectural design systems: That is distributed collaboration, which is accessible and comprehensible to all the professionals in the building design team, which not only allows the sharing of information but also the sharing of understanding, and which facilitates the development of design tools for different aspects of the envisioned collaborative design environment.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.263-275
• /
• 2000

Multidisciplinary design optimization(MDO) can yield optimal design considering all the disciplinary requirements concurrently. A method to implement the collaborative optimization(CO) approach, one of the MDO methodologies, is developed using a pre-compiler “EzpreCompiler”, a design optimization library “EzOptimizer”, and a common object request broker architecture(CORBA) in distributed computing environment. The CO approach is applied to a mathematical example to show its applicability and equivalence to standard optimization(SO) formulation. In a realistic engineering problem such as optimal design of a two-member hub frame, optimal design of a speed reducer and initial design of a bulk carrier, the CO yields better results than the SO. Furthermore, the CO allows the distributed processing using the CORBA, which leads to reduction of overall computation time.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.491-494
• /
• 1998

This paper describes the design and implementation of file system which allows the collaborative computing in mobile environment. The design goal is to make a logically one file system in the distributed computer systems. The characteristics of frequent, foreseeable and variable disconnections in a mobile environment wrer taken into consideration. We introduce an auto-hoarding system that provides the availability of large number of nodes which are weakly and intermittently connected. The data consistency problems in distributed or replicated mobile data are also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.996-999
• /
• 1996

This paper introduces prototype design of 765kV Substation control system based on fiber optics LAN and distributed network protocol. Two major important facts, immunity of any surge which frequently occurs in Ultra High Voltage Substation and the most suitable communication protocol for substation control system, are considered on the system design conception. To meet the first fact, use of fiber optics cable and isolation transformer are considered, and to satisfy the second fact, DNP3.0(Distributed Network Protocol) which is IEC870-5 compatible is adopted.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.283-284
• /
• 2008

A cross-layer optimization is becoming a popular design methodology for the IP based next generation wireless network. We begin by investigating a cross-layer optimization scheme to enhance the system performance in wireless networks. By applying cross-layer optimization methodology to WiBro distributed network, the WiBro systems are expected to gain significant performance improvement and resource utilization enhanced. For further study we highlight some open challenges and new opportunities for cross-layer design.

• 연구논문집
• /
• s.32
• /
• pp.111-120
• /
• 2002

In this paper, the design of a decatizing cylinder with uniformly distributed pressure in a decatizing system is investigated by using the Finite Element Method. Particularly, since deflection of a cylinder will not perform to iron the fabrics, the cylinder design insuring uniform pressure is very important. In this paper proposed two improved cylinder model obtained by changing the support type of the bean and the support location. And perform optimization with two improved cylinder model.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.8
• /
• pp.1019-1026
• /
• 2002

The Distributed system environments are developing into a structure of the opening information communication network based on object-oriented concepts and distributed technologies. Such a reason is that it can not only decrease the complexity of distributed softwares, but also support object oriented application services to distributed environments without changes of its own communication network structure. In this paper, we designed object group model, that is, an extended middleware, we developed before. The distributed environment suggested consists of the CTS server and clients. As our results, we showed the interaction procedures between/among object groups and service procedures of distributed application in given distributed system.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.236-245
• /
• 2011

Many researchers have recently studied multi-level formulation strategies to solve the MDO problems and they basically distributed the coupling compatibilities across all disciplines, while single-level formulations concentrate all the controls at the system-level. In addition, approximation techniques became remedies for computationally expensive analyses and simulations. This paper studies comparisons of the MDO methods with respect to computing performance considering both conventional sequential and modem distributed/parallel processing environments. The comparisons show Individual Disciplinary Feasible (IDF) formulation is the most efficient for sequential processing and IDF with approximation (IDFa) is the most efficient for parallel processing. Results incorporating to popular design examples show this finding. The author suggests design engineers should firstly choose IDF formulation to solve MDO problems because of its simplicity of implementation and not-bad performance. A single drawback of IDF is requiring more memory for local design variables and coupling variables. Adding cheap memories can save engineers valuable time and effort for complicated multi-level formulations and let them free out of no solution headache of Multi-Disciplinary Analysis (MDA) of the Multi-Disciplinary Feasible (MDF) formulation.