• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.113-132
• /
• 2005

The purpose of this study was to assess the stress-induced pattern at the supporting bone, the implant fixture, the abutment and the abutment screw according to a friction-fit joint (Astra; Model 1) or slip- fit joint (Frialit-2; Model 2) in the internal connection system under vertical and inclined loading using finite element analysis. In conclusion, in the internal connection system of the implant and the abutment connection methods, the stress-induced pattern at the supporting bone, the implant fixture, the abutment and the abutment screw according to the abutment connection form had difference among them, and the stress distribution pattern usually had a widely distributed tendency along the inner surface of the implant fixture contacting the abutment post. The magnitude of the stress distributed in the supporting bone, the implant fixture, the abutment and the abutment screw was higher in the friction-fit joint than in the slip-fit joint. But it is considered that the further study is necessary about how this difference in the magnitude of the stress have an effect on the practical clinic.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2373-2384
• /
• 1996

Connection caching technique is widely used to reduce the overhead incurred by frequency connection establishment in distributed computing environment using connection oriented protocol. We present an efficient connection caching scheme where we divide the system into several host groups and connection between the hosts in the same group is kept prior to others. In other words it makes the connection kept longer by sharing the connection use information between hosts in the same group. Every host group consists of hosts which have heavy intercommunication. And we present performance evaluation of the effect of host grouping upon connection caching and performance comparison of various grouping in several aspects includingmeanservice request interarrival time, mean service time, group size, grouping and type of group. Simulation results show that host grouping is effective in evrey performance criterion and proper grouping of hosts enhances the performance. We also present analysis results for Markov process model of our scheme which are consistent with the simulation results.

• 한국전자통신학회논문지
• /
• 제14권5호
• /
• pp.951-958
• /
• 2019

분산 전원의 계통 연계를 위해서는 연계 전에 분산 전원 출력전압을 계통전압과 동기화시켜야 하는데, 전압의 크기, 위상 그리고 주파수를 일치시키는 문제이기 때문에 쉽지 않다. 본 연구에서는 3상 인버터의 계통 연계를 위한 벡터제어 기반의 동기화 알고리즘을 개발하였다. 하나의 3상 전압형 인버터를 설계, 제작하여 개발된 알고리즘의 유효성을 검증하였다. 3상 인버터의 주제어장치는 DSP 기반으로 개발되었고, 계통의 전기적인 레벨은 실험실에서 실험이 가능한 전기적 레벨로 하였다. 그리고 실험을 통하여 3상 인버터의 출력전압이 계통전압을 추종하여 동기화를 이루는 것을 보임으로서 제시된 알고리즘이 계통 연계를 위한 동기화 알고리즘으로 활용될 수 있음을 확인될 수 있었다.

• 한국정보통신학회논문지
• /
• 제5권3호
• /
• pp.483-491
• /
• 2001

Java RMI는 네트워크를 통해 연결된 분산 환경 시스템에서 원격 컴퓨터에 존재하는 메소드간에 정보를 주고받을 수 있는 어플리케이션을 개발할 수 있도록 개발된 모델이다. 본 논문에서는 Java RMI를 이용하여 원격 컴퓨터에 존재하는 객체의 메소드를 연결하는 시스템을 설계하고 구현하였다. 이를 위해, 클라이언트가 이용할 수 있는 동적 메소드 연결 인터페이스 및 구현 부분을 API 형식으로 완성하였다. 또한 동적 메소드 연결시에 서버에서 사용하는 동적 메모리 할당, 소멸 등을 위한 관리 루틴을 완성하였다.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.448-455
• /
• 2007

As Decentralized Generation(DG) becomes more reliable and economically feasible, it is expected that a higher application of DG units would be interconnected to the existing grids. This new market penetration of DG technologies is linked to a large number of factors like technologies costs and performances, interconnection issues, safety, market regulations, environmental issues or grid connection constrains. This paper describes the procedures and results for the mechanical, electrical, and environmental tests of MGT on actual grid-connection under Korean regulations. As one of the achievements, the simulation model of MGT was developed, so that it will be able to analyze or propose new distributed generation system using MGT. The field test was conducted in order to respond to a wide variety of needs for noise reduction and utilization and its performance was evaluated in consideration of its operational problems. The MGT is successfully supplying electricity to Korean grids with satisfying various regulations. The suggested strategy and experience for the evaluation of the distributed generation will be used for the introduction of other distributed generation technologies into the grid in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.90-92
• /
• 2005

In this paper, we design a digital protection IED(Intelligent Electric Device) for a distributed power system in connection with power grid. The device can measure various elements for protection and communicate with another devices through network. The protection IED is composed of specific function modules: signal process module which converts analog signal from PT and CT handle algorithm to digital one; communication module for connection with another IEDs; input/output module for user-interfaces; main control module for control the whole modules. A general purpose DSP board with TMS320C2812 is used in the IED. Experiments with the power system simulator DOBLE have been made to verily the proposed hardware system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.463-466
• /
• 2005

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection constrains. KEPOD (Korea Electric Power Corporation) is performing the project to develope the Distributed Micro Gas Turbine (MGT) technologies by using Swine BID-ENERGY. This paper describes the plans and strategies for the renewable energy of MGT on actual grid-connection under Korean situations. KEPOD also, has a research plan on bio-gas pretreatment system applicable to our domestic swine renewable resources and is performing concept design of pilot plant to test grid operation. In addition, this testing will be conducted in order to respond to a wide variety of needs for application and economic evaluation in the field of On-site generation.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.762-768
• /
• 2010

This paper describes the development of a new islanding detection method for inverter-based distributed generation systems, which uses a signal cross-correlation scheme between the injected reactive current and the power frequency deviation. The proposed method injects 1% of the reactive current to the rated current which brings about a negligible degradation of the power quality. It discriminates the islanding state, when the calculated cross-correlation index is larger than 0.5. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software and experimental research with a hardware prototype. The proposed method can detect the islanding state without degrading the power quality at the point of common connection. Further study is required to overcome the cancellation of the injected reactive current from multiple distributed generation units interconnected with the utility grid.

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.47-57
• /
• 2024

Recently, in newly constructed apartment buildings, the exterior wall structures have been characterized by thinness, having various openings, and a significantly low reinforcement ratio. In this study, a nonlinear finite element analysis was performed to investigate the crack damage characteristics of the exterior wall structure. The limited analysis models for a 10-story exterior wall were constructed based on the prototype apartment building, and nonlinear static analysis (push-over analysis) was performed. Based on the finite element (FE) analysis model, the parametric study was conducted to investigate the effects of various design parameters on the strength and crack width of the exterior walls. As the parameters, the vertical reinforcement ratio and horizontal reinforcement ratio of the wall, as well as the uniformly distributed longitudinal reinforcement ratio and shear reinforcement ratio of the connection beam, were addressed. The analysis results showed that the strength and deformation capacity of the prototype exterior walls were limited by the failure of the connection beam prior to the flexural yielding of the walls. Thus, the increase of wall reinforcement limitedly affected the failure modes, peak strengths, and crack damages. On the other hand, when the reinforcement ratio of the connection beams was increased, the peak strength was increased due to the increase in the load-carrying capacity of the connection beams. Further, the crack damage index decreased as the reinforcement ratio of the connection beam increased. In particular, it was more effective to increase the uniformly distributed longitudinal reinforcement ratio in the connection beams to decrease the crack damage of the coupling beams, regardless of the type of the prototype exterior walls.

• 정보처리학회논문지A
• /
• 제9A권2호
• /
• pp.207-216
• /
• 2002

본 논문에서는 CORBA환경 하에서 오디오/비디오 스트림을 효율적으로 처리하고 제어하기 위한 분산 오디오/비디오 스트림 프래임워크의 설계와 구현에 관한 내용을 기술한다. 분산 오디오/비디오 스트림 서비스 프레임워크는 오디오/비디오 스트림의 효율적인 처리와 제어 그리고 전송을 위한 소프트웨어 구성 요소들을 분산 객체들로 설계한다. 그리고 오디오/비디오 데이터의 전송 효율을 최적화하기 위하여 제어 데이터와 미디어 데이터의 전송 경로를 분리한다. 분산 객체들은 IDL로 정의하며 JAVA로 구현한다. 그리고 미디어 데이터의 캡쳐, 재생 그리고 통신 채널 등 디바이스에 의존적인 기능들은 JMF에서 제공하는 컴포넌트들로 구현한다. 스트림 통신을 위한 분산 객체들 간의 연결설정과 제어 절차를 보여주며, 검증을 위하여 테스트 시스템을 구축하여 성능을 실험한다. 실험 결과 연결설정 지연은 TCP 연결에 비해 다소 지연을 가지나, 미디어 데이터의 전송은 RTP/UDP프로토콜을 사용하여 CORBA의 IIOP 프로토콜에 비해 최적화된 성능을 보여준다. 또한 미디어 데이터를 전송할 때 서비스 품질을 측정한 결과 만족할 만한 성능을 보여준다.