• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.368-372
• /
• 2009

Pin-hole model has been widely used as a robust tool for easily understanding how to obtain a stereo image and how to present the depth-cue to an observer in stereoscopy. However, most of the processes to analyze depth cue in stereoscopy are performed that a stereo image is taken by camera model practically but depth cue of the image is analyzed by pin-hole model. Therefore, the result of depth cues by the process to be uncorrected. The reason of the uncorrected depth cue is led to the image distances of camera model due to variable focused object distances, and it makes a depth distortion. In this paper, we tried to show the contradiction such as occurring depth distortion in the process which the pin-hole model is used to analyze depth cue despite practical camera model is used in stereoscopy, and we presents the method to overcome the contradiction.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.2
• /
• pp.106-114
• /
• 2015

In the fabrication of offshore oil and gas facilities, the significance of dimension control is growing continuously. But, it is difficult to determine the deformation of the structure during fabrication by simple lab tests due to the large size and the complicated shape. Strain-boundary method (a kind of shrinkage method) based on the shell element was proposed to predict the welding distortion of a structure effectively. Modeling of weld geometry in shell element is still a difficult task. In this paper, a concept of imaginary temperature pair is introduced to handle the effect of geometric factors such as groove shape, plate thickness and pass number, etc. Single pass imaginary temperature pair formula is derived from the relation between the groove area and the FE mesh size. By considering the contribution of each weld layer to the whole weldment, multi-pass imaginary temperature is also derived. Since the temperature difference represents the distortion increment, cumulative distortion curve can be drawn by integrating the temperature difference. This curve will be a useful solution when engineers meet some problems occurred in the shipyard. A typical example is shown about utilization of this curve. Several verifications are conducted to examine the validity of the proposed methodology. The applicability of the model is also demonstrated by applying it to the fabrication process of the heavy ship block. It is expected that the imaginary temperature model can effectively solve the modeling problem in shell element. It is also expected that the cumulative distortion curve derived from the imaginary temperature can offer useful qualitative information about angular distortion without FE analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.65-71
• /
• 2007

Doherty amplifier has more efficiency and distortion than general amplifier. These distortion classified amplitude distortion and phase distortion, memory effect distortion. This paper reports on an attempt to investigate, model and quantity the contribution of the electrical nonlinearity effects and the thermal memory effects to a doherty amplifier's distortion generation and suggests thermal memory effect compensator for pre-distorter. Also this paper reports on the development of an accurate dynamic expression of the instantaneous junction temperature as a function of the instantaneous dissipated power. The parameters of suggested model suppress thermal memory effects doherty amplifier with pre-distorter. Pre-distorter with electrothermal memory effect compensator for doherty amplifier enhanced ACLR performance about 22 dB than general doherty amplifier. Experiment results were mesured by 50W LDMOS Doherty amplifier and pre-distorter with electrothermal memory effect compensator was simulated by ADS.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.681-687
• /
• 2002

The cumulative, shrinkage plastic strains and their distributions in the weld joint after completion of the welding process determine welding-induced distortion. Although the weldment undergoes many complex physical and metallurgical changes during welding, only the material plastic temperature range and its cooling history below this temperature range influence the [mal state of the cumulative shrinkage plastic strains. In addition, for structural welds, these plastic strains are uniform, except in the arc start and stop regions, along the weld. Therefore, the plastic strain-based "inherent shrinkage model" is effective and accurate to describe welding-induced distortion. This paper presents the theoretical background and numerical verification of this root cause.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.375-379
• /
• 1997

Thermal drift of the machine tool spindle due to temperature increase dominates the major source of the machine tool error. To compensate the thermal errors, software based error correction methods could be implemented. In th~s case, we need model to map the relationship between temperature and thermal distortion. Traditionally, two or three different methods have been trled: step increase of spindle speed, constant, random. The latter two methods are described in the document of ISOlDIS230-3. In this research, three different methods were verified through the experiments from the viewpoint of compensation of thermal distortion. Constant spindle speed turned out good enough for monitoring the behavior of the thermal drift and modeling the relationship between temperature and thermal distortion.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.165-170
• /
• 1998

In this paper, the effect of nonlinear distortion, caused by a high-power amplifier (HPA) in an orthogonal frequency division multiplexing (OFDM) system, on the receiver part is analyzed. Since the HPA, which can be modeled by a memoryless Volterra system, distorts OFDM signals in a nonlinear fashion, the received signal at each subchannel includes the multiplicative distortion of 1-st order as well as additive nonlinear distortion of higher-order. The nonlinear distortion can be viewed as a nonlinear interchannel interference (NICI) since it consists of harmonic distortions and intermodulation distortions, produced by other subchannels affecting the subchannel of interest. In this paper, were analytically derive the variance of NICI in terms of average input power using the Volterra model for HPA, and then calculate the bit-error rate (BER) performance of an OFDM system. Also, we propose a simple method to compensate for the phase distortion in OFDM system amplified by HPA, and calculate its BER performance. Validity of the proposed approach is verified by computer simulations for an OFDM system employing 16-QAM constellation input.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.475-483
• /
• 2015

This study examined the feasibility of using an automatic lens distortion correction (ALDC) camera as the payload for a photogrammetric unmanned aerial vehicle (UAV) system. First, lens distortion for the interior orientation (IO) parameters was estimated. Although previous studies have largely ignored decentering distortion, this study revealed that more than 50% of the distortion of the ALDC camera was caused by decentering distortion. Second, we compared the accuracy of bundle adjustment for camera calibration using three image types: raw imagery without the ALDC option; imagery corrected using lens profiles; and imagery with the ALDC option. The results of image triangulation, the digital terrain model (DTM), and the orthoimage using the IO parameters for the ALDC camera were similar to or slightly better than the results using self-calibration. These results confirm that the ALDC camera can be used in a photogrammetric UAV system using only self-calibration.

• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.7-14
• /
• 2013

The legitimacy of dominating factor in the high accuracy prediction of welding distortion was investigated for butt welding and fillet welding. When out-of-plane distortion was measured by the experiment objecting to butt welding, if tack welding was easily performed, the position of a neutral axis was variously changed by the irregularity. Then, there have been a case that out-of-plane distortion was generated in the unexpected direction. This case should be especially noted. New model for the experiment was proposed so as to solve this problem. As it was elucidated by the case of fillet welding, it was verified that the analysis should be carried out with satisfying the yield condition (especially at high temperature above 700 degree Celsius) and with closely simulating the penetration shape (heat input in weld metal) in order to solve the proposition that is the high accuracy prediction of welding distortion. It was confirmed that residual stress is highly predicted because welding distortion is highly predicted, too.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

Purpose : The fascia is the body's largest sensory organ affected by mechanical stimuli such as pressure. Fascial distortion model (FDM) is one of the fascia treatment techniques, and it is based that most musculoskeletal problems are caused by three-dimensional distortion of the fascia. Until now, some studies have been conducted to investigate the effect of FDM, but it is still not enough. In this study, among the six techniques of FDM, trigger band (TB) and cylinder distortion (CyD) were applied to the forearm to investigate the immediate effect on the maximal grip strength, force sense and range of motion. Methods : 22 healthy adults in their 20s and 30s participated. Before and after the application of FDM, maximal grip strength, force sense and range of motion were measured. For analysis, a paired t-test was performed, and the significance level was set to p<.05. Results : After FDM, there were a significant differences that increased the force sense and the range of motion (p<.05). But the maximal grip strength did not show a significant difference (p>.05). Conclusion : The results of this study, the FDM did not affect maximal grip strength, but it was shown to increase the sense of force and range of motion. We assumed that it is the result of the changes in the states of the fascia and changes in the activity of mechanical receptors induced by pressure and stretch from FDM application.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.7
• /
• pp.434-441
• /
• 2003

This paper proposes a new quantitative and objective image quality metric which is essential to verify the performance of block-based DCT image coding. The proposed metric considers not only global distortion of coded image such as spatial frequency sensitivity and channel masking using HVS based multi-channel model, but also structural distortions caused block-based coding. The experimental results show a strong correlation between proposed metric and subjective metric.