• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.22-25
• /
• 2007

Angular distortion in welding process is decided by the various variables. We can make the prediction of welding distortion in similar reality by the analysis of data through many specimen tests. However it is difficult that prediction of welding distortion applies to the ship building. We can establish that angular distortion varies directly as the specimen size. And, it makes clear distortion's difference between constraint and unconstraint, according to the change of a plate thickness.

• 한국항해학회지
• /
• 제20권3호
• /
• pp.117-126
• /
• 1996

Generally, the distortion of the negative feedback amplifier is reduced by a factor equal to the return difference (1+${\beta}_1A_1$), but the proposed feedforward amplifier is reduced by a factor equal to the square of the return difference (1+${\beta}_1A_1$). In this paper, a feedforward amplifier with error correction is designed and implemented. So as to evaluate the characteristics of the harmonic distortion that the inverting feedforward amplifier is compared with that of the reference amplifier without feedforward error correction. It is confirmed that the proposed method should be able to reduce much greater than compared with a conventional negative feedback amplifier. Therefore it should be noted that the proposed feedforward amplifier network is also acceptable for wide-band amplifiers and the network which is demanded to improve the harmonic distortion.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.57-62
• /
• 1994

The demand of image compression is increasing now for the integration of medical images into the hospital information system. Even though the quantitative distortion can be measured from the difference between original and reconstructed images, it doesn't include the nonlinear characteristics of human visual system. In this study, we have evaluated the nonlinear characteristics of human visual system and applied them to the compression of medical images. The distortion measures which reflect the characteristics of human visual system has been considered. This image compression procedure consists of coding scheme using JND (Just Noticeable Difference) curve, polynomial approximation and BTC (Block Truncation Coding). Results show that this method can be applied to CT images, scanned film images and other kinds of medical images with the compression ratio of 5-10:1 without any noticeable distortion.

• 전력전자학회논문지
• /
• 제10권1호
• /
• pp.52-60
• /
• 2005

펄스 폭 변조 전압원 인버터에서는 전압 명령과 실제 전압 사이에 전압 차 또는 전압 왜곡이 존재한다. 이 전압 왜곡은 동작 온도, DC 링크 전압, 및 상전류 수준에 따라 달라진다. 또한 전압 왜곡은 전류 왜곡, 전동기 토크 맥동, 그리고 제어 성능에 영향을 미친다. 본 논문에서는 펄스 폭 변조 전압원 인버터의 전압 왜곡을 분석하고, 모델기준 적응 시스템(Model Reference Adaptive System)을 기반으로 하여 영구자석 동기 전동기의 파라미터 변화에 강인한 새로운 실시간 전압 왜곡 관측 기법을 제안한다. 그리고 제안된 전압 왜곡 관측 및 보상 기법에 대한 모의실험 및 실험을 통해서 그 효용성을 증명한다.

• 한국멀티미디어학회논문지
• /
• 제17권7호
• /
• pp.849-857
• /
• 2014

In this paper, we propose a (2,2)-reversible secret image sharing scheme using histogram shifting and difference expansion. Two techniques are widely used in information hiding. Advantages of them are the low distortion between cover and stego images, and high embedding capacity. In secret image sharing procedure, unlike Shamir's secret sharing, a histogram generate that the difference value between the original image and copy image is computed by difference expansion. And then, the secret image is embedded into original and copy images by using histogram shifting. Lastly, two generated shadow images are distributed to each participant by the dealer. In the experimental results, we measure a capacity of a secret image and a distortion ratio between original image and shadow image. The results show that the embedding capacity and image distortion ratio of the proposed scheme are superior to the previous schemes.

• 한국콘텐츠학회논문지
• /
• 제13권8호
• /
• pp.11-19
• /
• 2013

본 논문은 넓은 시야각을 갖는 어안렌즈로 촬영 시, 발생하는 방사 왜곡을 보정하는데 있어 왜곡의 중심을 추정하는 방법을 제안한다. FOV 왜곡 보정 모델의 경우 렌즈의 왜곡중심을 별도로 추정하지 않기 때문에 영상의 중심점과 렌즈의 왜곡중심의 오차가 클수록 왜곡보정의 정확도가 떨어지는 단점이 있다. 이에 본 논문은 광각 렌즈에서 FOV 모델과 2D 패턴을 이용하여 렌즈의 왜곡중심 추정을 통해 보다 정밀한 왜곡 보정 방법을 제안한다. 이를 위해 FOV 모델로부터 발생하는 왜곡곡선을 직선과 비교하여 곡선과 직선의 차가 가장 적은 위치를 왜곡의 중심으로 설정한다. 이 방법을 통하여 렌즈와 센서 중심점의 오차에 의해 발생하는 왜곡 중심 추정의 정확도를 향상시킬 수 있었고 실험결과를 통하여 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제16권1호
• /
• pp.17-21
• /
• 1978

The object of this study was to measure of the distortion of various dental waxes under condition simulating clinical usage. Eleven commercial product (table) including the inlay and baseplate waxes were tested, and compared in the study. Test specimens were prepared $5{\times}5{\times}65mm$. split brass mold. Placed this rod wax specimens and the brass wax distortion test mold into the water bath and tested the distortion values for waxes at $35^{\circ}C,\;40^{\cric}C,\;45^{\circ}C\;and\;50^{\circ}C$. Measured the distortion as the difference between the final (Df) and original (Do) distance between the ends of the specimen. Recorded Df, Do and Df-Do (Distortion) to the nearest 0.5mm. A minimum of five specimens were tested for each material. The following conclusions may be drawn from this study. 1) It can be seen that, a significant wax distortion was obtained with the temperature of forming the pattern, and the length of time and the temperature at which it was stored. 2) It was found that, when the storage time was increased, the wax distortion was correspondingly increased. At the sametime, the higher the storage time was employed, the distortion was obviously much greater. 3) It can be observed that the higher the temperature at which the wax was manipulated, the less was the resulting distortion upon storage.

• 한국음향학회지
• /
• 제29권6호
• /
• pp.381-387
• /
• 2010

다채널 오디오 코딩 시스템을 평가함에 있어서 음색 요소뿐만 아니라 공간감 요소 역시 큰 중요성을 갖는다. 이러한 이유로 양이 시간차 왜곡 (Interaural Time Difference Distortion, ITDDist), 양이 크기차 왜곡 (Interaural Level Difference Distortion, ILDDist), 양이 상관관계 왜곡 (Interaural Cross Correlation Distortion, IACCDist)과 같은 공간감 요소를 추가하여 기존의 음질 객관 평가 권고안인 ITU-R Rec. BS. 1387-1을 다채널 오디오 시스템에 적용하기 위한 시도가 있었다. 이 다채널 오디오 시스템을 위한 확장 모델에서는 Duplex 이론에 따라, 양이 시간차 왜곡은 1.5kHz 이하의 저주파 영역에 대해서만 계산되었으며, 양이 크기차 왜곡은 2.5kHz 이상의 고주파 영역에 대해서만 계산되었다. 하지만 고주파 영역에 있어서 포락선의 양이 시간차는 공간감 인지에 있어서, 특히 음상 정위에 있어서 중요한 역할을 한다. 이러한 고주파 영역 포락선의 양이 시간차 공간감 인지에 미치는 영향을 정량적으로 분석하기 위해 해당 인자를 계산하는 방법이 본 논문에서 소개된다. 또한, 이렇게 계산된 고주파 영역 포락선의 양이 시간차는 다채널 오디오의 주관평가 결과와 높은 상관관계를 가짐을 확인한다.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.61-67
• /
• 2005

During stereolithography processes, one of the main sources of dimensional error of prototype is the distortion effect owing to the shrinkage of resin. In this study, the effects of dimension of specimen, such as length, width, and thickness, on the curl distortion is examined. During the SL processes, the variation of curl distortion ewer is measured according to the number of layers, Through this study, it is verified that there is a big difference of the distortion error in both direction and magnitude between before and after the supports are removed. It Is also observed that end profile of the test part and the upper side around the border are also distorted due to the shrinkage of the resin.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.26-37
• /
• 2000

The purpose of this study was to investigate the effect that three resin indexing materials had on the distortion of split cast in the procedures of solder indexing and block fabrication. The specimen had two cylinders and connecting bar Two cylinders were a reference cylinder and a test cylinder that were machined precisely and placed on metal base. The total of specimens were 30 and they were divided into 3 groups according to the resin indexing materials : Acrylic $solder^{(R)}$, G-C Pattern $resin^{(R)},\;Z-100^{(R)}$. The relative coordinates (X, Y, Z) of centroids of both cylinders were measured by using 3-D cool dinates measuring machine. The value of indexing distortion was obtained after application of indexing material, and the value of the block distortion was obtained after fabrication of soldering block, and the value of total distortion was a value sum of indexing distortion and block distortion. Intercentroidal linear distortion ${(\sqrt{X^{'2}+Y^{'2}+Z^{'2}}-{\sqrt{X^2+Y^2+Z^2)}$ and global distortion $(\sqrt{{(X^'-X)}^2+{(Y^'-Y)}^2+{(Z^'-Z)}^2}$ were calculated from data of coordinates of centroids at each measuring stages. The results of this study were as belows ; 1. The intercentroidal distance between the split casts was reduced by indexing distortion and increased by block distortion. 2. The indexing global distortion between the split casts was smaller than block global distortion. 3. The intercentroidal linear distortion and the global distortion were no significant difference between indexing materials.