• 산업기술연구
• /
• 제23권A호
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• 한국항해항만학회지
• /
• 제34권5호
• /
• pp.367-373
• /
• 2010

수치해석을 수행할 경우 좀 더 정확한 수치모의를 위하여 해석영역의 특성에 따라 적절하게 요소를 배치하는 것이 필요하다. 본 연구에서 사용한 개별요소법(DEM)은 입자의 마찰력 및 항력을 제외한 반발력과 인장력만을 적용하였다. 초기 쿼드트리(Quad-tree)형식으로 충진된 입자들을 DEM을 이용하여 재배치할 경우 입자의 형상이 원형이기 때문에 입자사이에 존재하는 빈 공간을 최소화 할 수 있다. 결국 입자 중심점의 배치가 정삼각형에 가깝게 되는 특징을 보여준다. 이 재배치된 입자를 대상으로 Delaunay 삼각기법을 이용하여 삼각망을 구성하고, Laplace 보간을 수행하여 격자 품질을 향상시켰다. Laplace 보간 전 후의 형상비(Aspect Ratio: AR)를 비교한 결과 DEM을 이용하여 작성한 격자의 품질도 우수하지만, Laplace보간을 수행한 이후 보다 높은 품질의 격자가 생성되는 것을 확인하였다. 본 연구에서 개발한 기법은 기존의 삼각격자망 생성기법에 비해 다소 계산시간이 오래 걸리는 단점이 있지만, 복잡한 형상과 정확한 지형의 재현을 필요로 하는 파랑 해석용 유한요소 격자망 작성 및 다양한 수치모의 분야에서 그 적용 가능성이 매우 높다고 사료된다.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.972-981
• /
• 2000

The phased array transducer has two distinct advantages. One is rapid scanning comparing with the conventional mechanical or manual scanning system. Therefore, output image is represented in real-time. The other is the dynamic focusing and the dynamic steering of ultrasonic beam. Only the delay times that are controlled electrically are used to focus and to steer beam without any lenses or wedges. In this study, the profile of the ultrasonic beam for the phased array transducer has been simulated in the Huygens principle with varying the inter-element spacing of the linear phased array transducer. From the result of this study, it was found that the ultrasonic beam spread wider as the inter-element spacing was decreased. However, the focusing effect was improved, even when the number of the element was not big. In addition, there was grating lobes that are constructed when the inter-element spacing is more than half wavelength. However, this grating lobe has lower amplitude than the main lobe.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.384-393
• /
• 2019

An experimental validation of a nuclear forensics methodology for the source reactor-type discrimination of separated weapons-useable plutonium is presented. The methodology uses measured values of intra-element isotope ratios of plutonium and fission product contaminants. MCNP radiation transport codes were used for various reactor core modeling and fuel burnup simulations. A reactor-dependent library of intra-element isotope ratio values as a function of burnup and time since irradiation was created from the simulation results. The experimental validation of the methodology was achieved by performing two low-burnup experimental irradiations, resulting in distinct fuel samples containing sub-milligram quantities of weapons-useable plutonium. The irradiated samples were subjected to gamma and mass spectrometry to measure several intra-element isotope ratios. For each reactor in the library, a maximum likelihood calculation was utilized to compare the measured and simulated intra-element isotope ratio values, producing a likelihood value which is proportional to the probability of observing the measured ratio values, given a particular reactor in the library. The measured intra-element isotope ratio values of both irradiated samples and its comparison with the simulation predictions using maximum likelihood analyses are presented. The analyses validate the nuclear forensics methodology developed.

• 한국어류학회지
• /
• 제21권4호
• /
• pp.311-321
• /
• 2009

Three categories (freshwater, amphidromous, and marine fishes) of Taiwanese fishes are analyzed on the basis of zoogeographic elements, viz. China element, Indo-China element, Indo-West Pacific element, Indo-Pacific element, North-Pacific element, Japan-Oregon element, and circumtropical element. Freshwater fishes, which include the China and Indo-China elements, are distributed on part of the boundary area between the Palaearctic and Oriental regions of Wallace (1876). Diadromous fishes include the North-Pacific, Indo-China and Indo-West Pacific elements. Taiwanese salmon, a landlocked (initially diadromous) species that became established in Taiwan between 0.5 my B.P. and the early Pleistocene, is recognized as a distinct taxon included within the Oncorhynchus masou complex, which comprises here three species and two subspecies, viz. Oncorhynchus masou masou (Sancheoneo, Songeo, Sakura-masu or Yamame), O. masou ishikawae (Satsuki-masu or Amago), O. sp. (Biwa-masu), and O. formosanus (Taiwanese salmon), based on molecular, morphological and biological studies. Marine fishes are discussed under the following headings, brackish-water fishes (fishes of brackish waters and seas adjacent to continental coastlines, North Pacific and Indo-West Pacific elements; fishes of brackish waters and seas primarily around islands, Indo-West Pacific element), reef fishes (fishes of inshore reefs along continental coastlines from 0 to ca.100 m depth, Indo-West Pacific element; fishes of inshore reefs primarily around islands from 0 to ca.100 m depth, Indo-West Pacific element; fishes of offshore reefs along continental shelf edges from ca.150 to 300 m depth, circumtropical and Indo-Pacific elements; fishes of offshore reefs primarily around islands from ca.150 to 300 m depth, Indo-Pacific element), demersal fishes (fishes on continental shelves shallower than ca.150 m depth, Indo-West Pacific and Japan-Oregon elements; fishes on edges and upper continental slopes from ca.150 m to 500 m depth, Indo-West Pacific, Indo-Pacific, and circumtropical elements; fishes on lower continental slopes to abyssal plains from ca.500 m to 6,000 m depth, circumtropical element and rarely Indo-Pacific element), pelagic fishes (epipelagic fishes from 0 to ca.150 m depth, Indo-West Pacific, Indo-Pacific or circumtropical elements; meso- and bathypelagic fishes from ca.150 to 3,000 m depth, circumtropical element). The distribution of Taiwanese marine fishes are influenced by the Kuroshio Current, low-salinity and low-temperature waters from mainland China, and sea-bottom topography.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.1-11
• /
• 2016

Traditional costumes have evolved while reflecting the social, cultural and psychological values of the era. Costumes gain meaning by being worn that also allows their various symbolic meanings to be derived. Costumes worn in festivals by specific societies and organizations have especially apparent symbolism pertaining to their purpose. Most countries have traditional festivals that embody the country's distinct culture, history and traditions. These festivals are acts of consciousness expressing a special meaning of the community. Costumes represent a glimpse of life and culture during a festival period; in addition, the costume's style, color elements and decorations are expressions of community values and a distinct symbolic mechanism. Totemism (a significant element of these festivals) has been passed down for many generations. The current costumes for Totemism are distinct (compared to normal festival costumes) and embody a more symbolic meaning. This study deduces the exaggerated style, the concealment and disguise of the human body, and the pursuit of pleasure expressed in the Totemism costumes of regional European festivals. The symbolization theories of C. G. Jung and an analysis of Totemism costumes allow an understanding of their existential significance, their role as the medium between consciousness and unconsciousness, their meaning of symbolic transcendental unity, and their meaning of giving consciousness to the mind.

• 터널과지하공간
• /
• 제2권1호
• /
• pp.152-163
• /
• 1992

The study of rock mass behaviour through a numerical analysis is important for the design, construction and maintenance of large rock caverns. The objectives of the numerical analysis are to design reasonably and construct safely the underground structures, to maintain them soundly after construction and to extend them securely for a desired period of time. Methods of numerical analyses included in this case study are the finite element method, the boundary element method, and the distinct element method. The numerical models are purely elastic, elastoplastic, visco-elastic, visco-plastic, easto-visco-plastic and jointed-discontinuous materials. The results of this case study indicate that the rock mass behaviour could be predicted exactly through continuous comparisons of the numerical results with the in-situ measurements.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.492-492
• /
• 2009

Nowadays in Republic of Korea, there is no distinct reference for the related design technology of rotor blade of wind turbine. Therefore the optimum design and evaluation of performance is carried out with foreign commercial code softwares. This paper shows in-house code software that evaluates the aerodynamic design of wind turbine rotor blade using blade element-momentum theory (BEMT) and processes that is applied through various aerodynamics theories such as momentum theory, blade element theory, prandtl's tip loss theory and strip theory. This paper presents the results of the numerical analysis such as distribution of aerodynamic properties and performance curves using in-house code POSEIDON.

• 소음진동
• /
• 제9권5호
• /
• pp.1029-1035
• /
• 1999

This paper relates to the flexural vibration analysis of slender spindle systems with multiple thin disks, supported by the ball bearings by means of the finite element method. Each system component is analytically modeled taking into account its flexibility and also the centrifugal effect especially for the disk. In order to show the rapid convergence rate and accuracy of the proposed approach, an experimental set-up is built to be versatile. In two distinct cases, its natural modes are numerically computed using only a small number of total element meshes as the shaft rotational speed is varied, and verified through experimental frequency response function obtained by the impact test.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.755-769
• /
• 2015

In this study, a 2-D finite element formulation in the frame of nonlocal integral elasticity is presented. Subsequently, the bending problem of a nanobeam under different types of loadings and boundary conditions is solved based on classical beam theory and also 3-D elasticity theory using nonlocal finite elements (NL-FEM). The obtained results are compared with the analytical and numerical results of nonlocal differential elasticity. It is concluded that the classical beam theory and the nonlocal differential elasticity can separately lead to significant errors for the problem under consideration as distinct from 3-D elasticity and nonlocal integral elasticity respectively.