• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.353-358
• /
• 2011

In this study, ammonia removal characteristics in membrane contactor system under various operating conditions were evaluated. The mass transfer coefficient was used to quantitatively compare the effect of various operation conditions on ammonia removal efficiency. Effective removal of ammonia was possible with the tubular PTFE membrane contactor system at all tested conditions. Among the various operation parameters, contact time and solution pH showed significant effect on ammonia removal mechanism. Overall ammonia removal rate was not significantly affected by influent suspended solution concentration unlike other pressure driven membrane filtration processes. Also the osmotic distillation phenomena which deteriorate the mass transfer efficiency can be minimized by preheating of strip solution. Membrane contactor system can be a possible alternative to treat high strength nitrogen wastewater by optimizing operation conditions such as stripping solution flow rate, influent wastewater temperature, and influent pH.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.48-54
• /
• 1998

Korea becomes one of the countries which suffer from water shortage. It is expected that its water shortage in the early 2000's will be more than 10% of the annual demand. The shortage problem is more serious in the coastal areas where many industry complex locate. To solve the shortage problem, seawater desalination gets more attention as an alternative water supply source since Korea is surrounded by sea on its three sides. For potential application of seawater desalination in Korea, an economic analysis was conducted using cost data for the plants in the Middle Ease areas, The United states and others. The study is to provide a basis for the government to establish a strategy for promoting seawater desalination in Korea. It is discussed that the Reverse Osmosis (RO) process gets cheaper over times than the thermal processes of Multi-stage Flash Distillation (MSF) and Multi Effect Distillation (ME), especially in case where the capacity is less than about 50,000 ton/day. The unit cost of RO seawater is analyzed about US$1.35/ton in 1990 price. Since the Desalination plant can be operated regardless of weather conditions, industries in Korea's coastal areas which suffer from frequent droughts and water shortages are recommended to look into this option with more attention.

• Mass Spectrometry Letters
• /
• v.2 no.2
• /
• pp.41-44
• /
• 2011

Molecular compositions of two types of heavy oil were studied using positive atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Vacuum gas oil (VGO) was generated from vacuum distillation of atmospheric residual oil (AR), and slurry oil (SLO) was generated from catalytic cracking of AR. These heavy oils have similar boiling point ranges in the range of 210-$650^{\circ}C$, but they showed different mass ranges and double-bond equivalent (DBE) distributions. Using DBE and carbon number distributions, aromatic ring distributions, and the extent of alkyl side chains were estimated. In addition to the main aromatic hydrocarbon compounds, those containing sulfur, nitrogen, and oxygen heteroatoms were identified using simple sample preparation and ultra-high mass resolution FT-ICR MS analysis. VGO is primarily composed of mono- and di-aromatic hydrocarbons as well as sulfur-containing hydrocarbons, whereas SLO contained mainly polyaromatic hydrocarbons and sulfur-containing hydrocarbons. Both heavy oils contain polyaromatic nitrogen components. SLO inludes shorter aromatic alkyl side chains than VGO. This study demonstrates that APPI FT-ICR MS is useful for molecular composition characterization of petroleum heavy oils obtained from different refining processes.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.698-705
• /
• 2016

Butyl acetate is produced from acetic acid and butanol via an esterification reaction in reactive distillation (RD). The product, butyl acetate, has been used as an internal entrainer until now. In this case, butyl acetate and water are removed at the top of column and separated into two different phases (organic and aqueous phases) after condensation, and butyl acetate rich organic phase is refluxed into the RD. This method makes butyl acetate remain high at the reactive zone, leading to lower equilibrium conversion and product yield. We introduced an extraneous entrainer to solve the problem. The extraneous entrainer forms a new azeotrope with water. The proposed process provides lower concentration of butyl acetate in the reactive zone than conventional RD processes using an internal entrainer. We compared the yield and production rate of butyl acetate between the proposed and conventional processes through pilot-scale experiments. Experimental and simulation results showed that the proposed process was more efficient than conventional process using internal entrainer.

• Membrane Journal
• /
• v.17 no.1
• /
• pp.1-13
• /
• 2007

Pervaporation process using membrane is newly emerging energy saying and cost effect process instead of distillation process. Especially, in pertrochemical industry, pervaporation process is a strong candidate to substitute the conventional energy consuming processes because that petrochemical industry has much energy consuming separation processes, many azeotrope mixtures to separate and needs to compact space to install new process units. Aromatic/aliphatic separation including benzene/cyclohexane mixture, olefin/paraffin separation, xylene isomer separation, reactive monomer recovery and sulfur compound removal from gasoline have been inversitigated for the application of pervaporation membrane process by many researchers and are under commercializing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.330-336
• /
• 2014

Many industrial processes such as continuous stirred tank reactors(CSTRs), desalination plant, distillation columns, pH neutralization processes and so on exhibit highly nonlinear characteristic and time-varying behavior during operation. The control of such processes has been challenging to control engineers. Hence, a variety of forms of PID controllers and their tuning rules for industrial processes have been developed to guarantee the best performance. In this paper, a scheme that designs the practical PID controller with an anti-windup strategy incorporating with an evolutionary algorithm(EA) is presented for the concentration control of a nonisothermal CSTR. EA is used to tune the parameters of the overall PID control process with anti-windup by minimizing the integral of absolute error(IAE). Simulation works for reference tracking and disturbance rejecting performances and robustness to parameter changes show the feasibility of using the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.11
• /
• pp.1128-1136
• /
• 2007

This paper presents an application study of a model predictive control based commercial package PCTP to real chemical processes. The first case study concerns a product purity control of a splitter process which distillates styrene from undesired component ethyl-benzene produced from ethyl-benzene dehydrogenation reaction. The second case study is about a temperature control of ethyl-benzene dehydrogenation reactor and an excess oxygen control of the fired heater. Optimum control structure for MPC application is developed for each case study. The application results show a significant improvement in control performance and stability.

• Carbon letters
• /
• v.15 no.3
• /
• pp.162-170
• /
• 2014

Pitch is an attractive raw material for carbon fiber precursors due to its low cost stemming from its availability as a residue of coking and petroleum processes. Ford Motor Company reported a carbon fiber target price of $11.0/kg by using a fast cycle-time manufacturing method with carbon fiber in an inexpensive format, allowing for an average retail price of gasoline of $3.58/gallon. They also recommended the use of carbon fiber with strength of 1700 MPa, modulus of 170 GPa, and 1.5% elongation. This study introduced a ca. $5.5{\mu}m$ carbon fiber with 2000 MPa tensile strength obtained from a precursor through simple distillation of petroleum residue. Petroleum pitch based carbon nanofibers prepared via electrospinning were characterized and potential applications were introduced on the basis of their large specific surface area and relatively high electrical conductivity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.413-417
• /
• 2002

The Internet technology has been recognized not only as a tool far communication in the 21st century but also as an environment for enabling changes in the paradigm of teaching and learning. This paper describes a web-based system development for chemical engineering education. Simulation and visualization of dynamic systems in the environment of a standard web-browser is made possible by extending its capabilities. ActiveX control is used to simulate the system tool far online representation of Virtual Lab. System that is developed using visual basic. The courseware is classified into tutorial, exercises, and virtual experiments.