• 지역연구
• /
• 제31권2호
• /
• pp.47-61
• /
• 2015

이 연구의 목적은 수도권을 대상으로 입지를 변경한 기업들의 거리감쇄효과를 실증분석하는 것이다. 기업은 이전할 때 이전비용부담과 해당지역의 고객확보, 관련업체와의 협력 등으로 해당지역과 근접한 지역으로 재입지 하려는 경향을 나타낸다. 따라서 기업의 입지변경 시 이동거리는 기존 입지지역과 최대한 가까운 지역에 재입지하려는 거리감쇄효과가 발생한다. 본 연구는 수도권 소재의 서비스업과 제조업, 건설업 기업들의 기업이동 거리감쇄함수를 구축하고 그 효과를 실증분석하였다. 실증분석결과 서비스업과 제조업, 건설업 모든 기업의 거리감쇄효과가 있음을 확인하였으며, 구축한 거리감쇄함수의 설명력($R^2$)은 제조업은 .802, 서비스업은 .812, 건설업은 .728로 높은 설명력을 나타냈다. 이는 기업이동에 대한 거리감쇄효과가 있음을 실증한 것이며, 또한 건설업과 서비스업, 제조업 순서로 거리감쇄효과가 큼을 도출하였다.

• 자원ㆍ환경경제연구
• /
• 제24권2호
• /
• pp.435-461
• /
• 2015

본 연구는 최근 신규용수항목으로 인정된 환경개선용수 공급에 따른 편익을 경북 영덕군 영덕오십천을 사례로 조건부가치측정법(CVM)을 적용하여 측정하였다. 기존 CVM 방법론에 여행비용접근의 주요변수인 거리변수를 포함하여 시장영역을 설정하는데 활용하였으며, CV문항에 대한 저항응답들을 지불의사(WTP) 응답과 결합추정하여 잠재적 편의를 줄이고자 하였다. 실증분석결과 대상하천으로부터 먼 거리에 거주할수록 응답자들의 WTP도 적어지는 거리-소멸관계가 나타내었으며, 거리변수의 형태에 따라 WTP변화율도 달랐다. 나아가서 최장거리 거주자 범위 밖에서도 정의 WTP가 측정되어, 전국가구가 수혜자일 수 있음을 확인하였다. 다른 한편으로 전체표본, 저항응답 삭제 그리고 표본선택모형 추정 등 저항응답의 처리에 따라 제시금액 변수의 계수추정치가 상당히 차이가 났고, 결과적으로 표본 WTP도 저항응답 제외 표본은 2,000원 정도로 표본선택모형은 6,000원 정도로 측정되어 3배 정도의 차이가 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.791-796
• /
• 2011

In order to understand long range wave propagation in railway tracks, it is required to identify how far vibrations can travel along a rail. To answer this question, the attenuation characteristics of the main propagating waves are required as a function of distance. In this work, it is identified which wave types predominantly propagate on various regions of the rail cross-section. Then decay rates of propagating waves in railway tracks are investigated for frequencies up to 80 kHz. A numerical method called the Wavenumber Finite Element (WFE) method is utilized to predict dispersion curves and decay rates for a rail on a continuous foundation. In order to validate the simulated results, measurements have been performed on a test track and an operational railway track. The measured results are compared with the output of the simulations and good agreements are found between them.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.22-27
• /
• 2016

The Electrostatic Charge Prevention Technology is a core factor that highly influences the yield of Ultra High Resolution Flat Panel Display and high-integrated semiconductor manufacturing processes. The corona or x-ray ionizations are commonly used in order to eliminate static charges during manufacturing processes. To develop such a revolutionary x-ray ionizer that is free of x-ray radiation and has function to control the volume of ion formation simultaneously is a goal of this research and it absolutely overcomes the current risks of x-ray ionization. Under the International Commission on Radiological Protection, it must have a leakage radiation level that should be lower than a recommended level that is $1{\mu}Sv/hour$. In this research, the new generation of x-ray ionizer can easily control both the volume of ion formation and the leakage radiation level at the same time. In the research, the test constraints were set and the descriptions are as below; First, In order not to leak x-ray radiation while testing, the shielding box was fully installed around the test equipment area. Second, Implement the metallic Ring Electrode along a tube window and applied zero to ${\pm}8kV$ with respect to manage the positive and negative ions formation. Lastly, the ion duty ratio was able to be controlled in different test set-ups along with a free x-ray leakage through the metallic Ring Electrode. In the result of experiment, the maximum x-ray radiation leakage was $0.2{\mu}Sv/h$. These outcome is lower than the ICRP 103 recommended value, which is $1{\mu}Sv/h$. When applying voltage to the metallic ring electrode, the positive decay time was 2.18s at the distance of 300 mm and its slope was 0.272. In addition, the negative decay time was 2.1s at the distance of 300 mm and its slope was 0.262. At the distance of 200 mm, the positive decay time was 2.29s and its slope was 0.286. The negative decay time was 2.35s and its slope was 0.293. At the distance of 100 mm, the positive decay time was 2.71s and its slope was 0.338. The negative decay time was 3.07s and its slope was 0.383. According to these research, the observation was shown that these new concept of ionizer is able to minimize the leakage radiation level and to control the positive and negative ion duty ratio while ionization.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.617-631
• /
• 2019

본 4단계 교통수요예측모형의 통행분포단계에서 중력모형이 가장 일반적으로 활용하고 있다. 본 연구는 중력모형변수(통행시간, 통행비용 등)의 가변적인 한계를 보완하기 위해 접근성 속성을 단일 마찰인자로서 표현할 수 있는 보다 현실적이고 장래 활용이 용이한 신규 마찰인자를 개발하는데 그 목적이 있다. 이에 신규 마찰인자 도출을 위해 도시공간구조의 특성을 정량화할 수 있는 공간구문론(space syntax)을 활용하여 Link 단위 통합도를 도출 후 통행시간, 통행거리 관계를 이용해 일종의 대리변수로서의 신규 마찰인자를 도출하였다. 대수전환을 통한 마찰인자별 정산결과, 기존 마찰인자(최단거리, 통행시간) 대비 유사하거나 더 높은 수준을 보이는 것으로 분석되었다. 다양한, 검증지표를 활용하여 기존 마찰인자와의 비교시, 전체적으로는 기존 마찰인자와 유사하지만, 단거리 구간 및 장거리 구간에서 설명력이 뛰어난 것으로 분석되었다. 따라서, 기존 최단거리의 한계에서 벗어나 접근성을 보완할 수 있는 통합도 지표를 이용하여 신규마찰인자 도출 및 적용이 가능하고, 장래 활용성에서 좀 더 장점을 갖는 것으로 판단된다.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.77-83
• /
• 1995

An electrostatic reducer of a multi-pole high DC voltage applied type and a high frequency square wave voltage applied type have been studied to eliminate effectively and safely electrostatic charge on a dummy charged material. As a fundamental experiments, measurement were made on the decay time as a function of distance between electrostatic reducer and charged body, skewed angle of electrostatic reducer installed and wind speed of generated ions(＋ or －) by electrostatic reducer with high DC voltage and high frequency square wave voltage. Based oil the results above, a appropriate installation and method were produced as a trial for factory.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1395-1405
• /
• 1996

The purpose of this experimental research is to investigate the local heat transfer characteristics in the upward free water jet impinged on a downward flat plate of uniform heat flux. The inner shape of rectangular nozzle used was sine curve type and its contraction ratio of inlet to outlet area was five. Experimental parameters considered were Reynolds number, nozzle exit-flat plate distance, and level of supplementary water. Local Nusselt number was influenced by Reynolds number, Prandtl number, supplementary water level, and distance between the nozzle exit and flat plate. Within the impingement region, the Nusselt number has a maximum value on the nozzle center axis and decreases monotonically outward from center. Outside of the impingement region, on the other hand, the Nusselt number has a secondary peak near the position where the distance from nozzle center reaches four times the nozzle width. However if nozzle exit velocity exceeds 6.2 m/s, the secondary peak appears also in the impingement region. The empirical equation for the stagnation heat transfer is a function of Prandtl, Reynolds, and axial distance from the nozzle exit. The optimum level of supplementary water to augment the heat transfer rate at stagnation point was found to be twice the nozzle width.

• 한국경제지리학회지
• /
• 제1권1호
• /
• pp.137-149
• /
• 1998

교통망의 확충계획이 있거나 확충작업이 이루어지고 있는 지역에서는 그로 인한 직접적인 접근성 증가와 더불어 교통망의 개선에 따른 접근성 증가의 주변지역으로의 파급효과를 정확히 신출할 수 있다면 지역 전체의 접근성 공간구조를 파악할 수 있게 되고, 지가와 토지이용의 변화를 정확히 예측할 수 있게 되어 교통을 포함한 각종 지역계획과정에서 효율적이고 합리적인 대안선정을 위한 기준을 제공할 수 있을 것이다. 기존의 그래프이론에 기반을 둔 접근성 측정모형에 의해 산출되는 결정점의 접근성 증가가 주변지역으로 파급되는 효과를 정확히 산출할 수 있는 이론적 모형의 개발을 시도하였다. 특히 결정점을 중심으로 주변지역으로 거리가 멀어지면서 변화하는 지하철 접근도의 영향력을 측정하기 위한 이론적 모형을 제시하고 있다. 지하철역의 접근도가 주변지역으로 확산되는 정도는 주변지역에서 그 지하철역을 이용하는 정도와 일치한다고 보고 주변지역의 지하철역 이용밀도를 기반으로 수학적 함수식을 도출하였다. 이러한 연구는 궁극적으로는 최근 지리적 분석기법으로 각광을 받고 있는 GIS기법에 접목시켜 지표현상의 설명에 핵심이 되는 접근성의 공간적 보간에 대한 이론적 근거를 마련한다는 의미를 지닌다.

• 농촌계획
• /
• 제10권3호
• /
• pp.41-51
• /
• 2004

This study aims to develop a potential evaluation method for urban spatial expansion using remote sensing (RS) and geographic information system (GIS). A multi-criteria evaluation method with several criteria and their weighting values was introduced to evaluate the score and quantification of the potential surface around the existing cities. The six criteria with one geographic factor, slope, and five accessibility factors, time distance from center of the city, national road, interchange of expressway, a big city, and station, were defined for the potential. RS techniques were applied for classification of the actual urban expansion maps between two periods, and GIS functions were used for score of accessibility criteria with a distance decay function from geographic, road and several point maps, which was developed in this study. The new methodology was applied to a test area, Suwon, between 1986 and 1996. In order to optimize the six weighting values, this study made new findings to search the optimal combination of the weighting values from new methodology, weighted scenario method for intensity order (WSM), combined with intensity order and AHP method, including a trial and error method for sensitivity analysis to make the intensity order. The optimal combination of the weighting values by the new method generated the optimal potential surface, considering spatial trend of urban expansion in the test area.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.49-53
• /
• 2008

Glow discharge has lots of attractive properties, such as lower discharge sustaining voltage, no generation of ozone, and so on. And more, ionizer was developed recently using an atmospheric pressure glow discharge. On the other hand, ionizer needs a compressed or blown air to transport ion for charged objects. This air is very useful in explosive hazardous area to prevent the explosion of flammable gas and/or vapor by ignition sources, e.g. electrical spark. In this paper, we investigated the ionizing characteristic of atmospheric pressure glow discharge by controlled air flow rate from 5 liters to 60 liters a minute, and compared with decay time between the corona discharge and glow discharge as a function of some direction and distance from discharge ion source. We confirmed that an air flow rate needs 25 liters a minute to sustain the most suitable atmospheric pressure glow discharge and to increase an ionizing efficiency.