• 한국지반환경공학회 논문집
• /
• 제5권4호
• /
• pp.33-45
• /
• 2004

본 연구에서는 조립토 다짐말뚝에 대해 보다 체계적인 실내모형실험을 수행하여, 조립토 다짐말뚝과 인접지반의 하중분담 특성, 말뚝의 길이변화에 따른 지지력 특성, 재하면적의 크기 및 말뚝의 설치간격(인접지반의 치환율) 등이 지지력에 미치는 영향, 또한 군말뚝의 경우 위치별 말뚝의 지지력 특성 등, 궁극적으로 조립토 다짐말뚝의 합리적 설계를 위한 극한지지력 평가시 고려되어야 할 여러 조건하에서의 실험결과에 대한 분석이 수행되었다. 분석결과, 지배적인 파괴형태는 원추형에 가까운 팽창파괴임을 재차 확인하였으며, 재하면적이 커짐에 따라 극한지지력이 증가하는 현상도 확인하였다. 또한 말뚝의 설치간격이 줄어들수록 극한지지력은 증가하며, 설치위치에 따라 극한지지력이 변화하고, 말뚝의 길이가 극한지지력에 미치는 영향은 미소한 것으로 나타났다.

• 대한족부족관절학회지
• /
• 제8권1호
• /
• pp.71-75
• /
• 2004

Purpose: The purpose of this study was to evaluate retrospectively the clinical results of closed reduction and percutaneous screw fixation for unstable injuries on stress radiographs in subtle injuries of Lisfranc joint. Materials and Methods: From June 1997 to March 2003, 6 cases of unstable injuries on stress radiograph in subtle injuries of Lisfranc joint were treated by percutaneous cannulated screw fixation after closed reduction. All cases were injuried by indirect force (twisting injury). The average diastasis between the 1st and 2nd metatarsal base was 3 mm (2-4 mm) on initial nonweight bearing AP radiograph. The average follow-up period was 20 months. Clinical evaluation was assessed according to the American Orthopedic Foot and Ankle Society (AOFAS) midfoot score. Results: The AOFAS midfoot score was average 86 (80-90) points. The average diastasis between 1st and 2nd metatarsal base was 2 mm (1-3 mm) on weight bearing AP radiograph in final follow up. The final diastasis was increased slightly than diastasis in initial postoperative radiographs. But the clinical results were good. There was no correlation between the degree of diastasis and the clinical results. On weight bearing lateral radiograph, the average difference with normal foot in the distance between plantar aspect of 5th metatarsus and medial cuneiform was 2 mm (0-3 mm). One case had mild arthritic change on the radiographs. Conclusion: When the Lisfranc injuries, especially in the subtle injuries were suspicious, the stress views are helpful to assess stability of the Lisfranc injuries and planning of treatment. For unstable injuries on stress radiographs in subtle injuries of Lisfranc joint, closed reduction and percutaneous screw fixation is useful method to expect good clinical results.

• Tribology and Lubricants
• /
• 제33권3호
• /
• pp.119-125
• /
• 2017

In this study, we perform a numerical analysis to predict the film thickness and lubrication regions for a thrust ball bearing under different operating conditions. Film thinning and replenishment affect the film thickness in starved lubrication. As the inlet meniscus position is brought to the edge of the Hertz contact, the thin film thickness is calculated as starved equation. We use a film replenishment model to determine the recovery film thickness between rolling elements. We use a hydrodynamic model to describe film recovery, that results from the effects of surface tension. In this model, we consider the surface tension gradient in fluid depression as the driving force for fluid recovery. We use Fourier transform method to determine the time-dependent depth of depressed oil. We calculate the change in the central film thickness graphically by using the recovery equation in starved elastohydrodynamic lubrication(EHL) under operating conditions that include numbers of balls, sliding velocity, applied force, and ambient film thickness. We evaluate the degree of starvation by using the distance from the center of the contact area to the meniscus position. Parched lubrication, a phenomenon where the film thickness decreases consistently, occurs at the severe condition. We determine optimal values with respect to the numbers of balls, and sliding velocity. The investigation can contribute to the design operating conditions for proper lubrication.

• 한국전문물리치료학회지
• /
• 제3권2호
• /
• pp.55-76
• /
• 1996

The objective of this study was to identify the immediate effects of the short leg brace on the weight bearing distribution and gait patterns of hemiplegic patients. The subjects of this study were 18 hemiplegic patients who had been hospitalized or visited out-patient department of Rehabilitation Hospital, Yonsei University College of Medicine, from January 5, 1996 through March 23, 1996. PLS(Posterior Leaf Spring) on and off changes in gait patterns were measured using ink foot print as well as by recording weight bearing distribution using a limb load monitor. The data were analyzed by the correlation and paired t-test. The findings were as follows: 1. Eighteen subjects were more weighted on the affected leg when PLS was put off(42.74%) than on(40.08%). 2. The defference in gait patterns between PLS on and off was statistically significant, with an increase in step length by 1.7cm on the involved side; a decrease in foot angle by 4.41 degree on the involved side; and a narrowing of base of support by 1.46cm when PLS were off. In conclusion, this study showed that PLS did not affect the weight bearing distribution and gait patterns of hemiplegic patients. Since, the evaluation method used in this study has limitations in regard to temporal distance gait values. Further studies are required to numerous experiments for subject and extensive study.

• 한국강구조학회 논문집
• /
• 제28권1호
• /
• pp.1-12
• /
• 2016

본 연구에서는 스터럽 보강 선설치 앵커의 정적 전단하중에 대한 저항강도 평가를 위한 실험 연구를 수행하였다. 실험변수로는 전면지압철근 유무와 콘크리트 균열 유무로 설정하였다. 앵커는 M36, 연단거리는 180mm로 하였다. 모든 철근은 HD-10 철근을 사용하고 스터럽의 간격은 100mm로 하였다. 실험으로부터 전면지압철근을 설치한 경우 스터럽 저항강도는 16% 증가하였다. 한편 균열 콘크리트에서의 저항강도는 비균열 콘크리트에 비해 5% 감소에 불과하였다. 실험 결과로부터 ACI 318 및 ETAG 001 기준은 스터럽의 저항강도를 안전측으로 평가하였으며, 적절한 강도 평가 방안을 제안하였다. 마지막으로 스터럽 보강 시 앵커 본체의 파괴강도에 대한 고찰을 제시하였다.

• 항공우주기술
• /
• 제6권2호
• /
• pp.205-210
• /
• 2007

75톤급 액체 로켓 엔진용 터보펌프의 산화제펌프에 대한 로터다이나믹 설계를 수행하였다. 인듀서와 임펠러 및 베어링의 축배치는 항우연에서 개발 중인 유사한 구조를 가지는 터보펌프를 근간으로 하였고, 75톤급 산화제펌프 수력 설계에 맞추어 인류서, 임펠러의 축길이가 반영되었다. 후방 베어링으로부터 임펠러까지의 거리를 베어링 하중 설계에 대한 설계 변수로 고려하였고, 전방 베어링과 후방 베어링의 강성을 변화시키면서 회전 속도에 따른 비동기 고유진동수 해석을 수행하여 산화제 펌프의 임계속도를 고찰하였다. 베어링에 적절한 하중이 부과된다면 산화제 펌프의 임계속도는 기준속도 11,000 rpm과 비교하여 충분히 높기에, sub-critical 로터로서 기준속도 이내에서 안정적인 터보펌프의 운용이 가능하리라 판단된다.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.1-13
• /
• 2001

An absolutely passive fit at the interface with the superstructure and the abutment cylinders is need for implant longevity. In this study, a method of cast framework correction using spark erosion technology was evaluated. Electric discharge machining(EDM) is a process that uses electrical discharges, or sparks, to machine metal, The surface being machined is bombared with high-intensity electrical energy pulses that gradually melt away the stock until the desired configuration is obtained. Master model was fabricated by using metal block impression analogue, which fired 5 Branemark squared impression coping in an arc shaped metal block. Then framework using 4mm standard gold cylinder and type IV gold alloy was fabricated. In order to measure the fit of the framework we used both contact and noncontact coordinate measurement machine and data was processed by computer program. After superimposition of gold framework and master model numeric image data the distances between gold cylinder bearing surfaces and abutment replica bearing surfaces, and the angle deviations between gold cylinder and abutment replica centroid points were calculated. The results were as follows 1 The total mean distance (p<0.01) and standard deviation (p<0.001) between the gold cylinders and abutment bearing surfaces were significantly decreased after EDM 2. The total mean of maximum distances was significantly decreased after EDM (p<0.05). 3. After EDM, the mean angle deviation between centroid points was decreased.

• 대한물리치료과학회지
• /
• 제4권1호
• /
• pp.243-253
• /
• 1997

The purpose of this study was to determine the effect of systolic blood pressure, heart rate and myocardial oxygen consumption on 3-point nonweight bearing ambulation with axillary wooden crutch according to age. The subjects were fifty healty volunteers(22 male, 28 female), ages from 20 to 69(mean age of 43.8 years) with no history of cardiovascular or respiratory disease, diabetes mellitus, arthritis and orthopedic disorder within the past three years. This study was carried out from May 10 to August 10, 1996. The data were analyzed by percentage, mean and standard deviation and ANOVA. The results were as follows : 1. In systolic blood pressure(SBP), there was no significantly change between before walk and after 20 m in crutch walking with age, however, there did differ significantly after 40 m and 60 m in crutch walking(p<0.01, p<0.001). 2. In heat rate(HR), there was no significantly change between before walk and after 20 m, 40 m in crutch walking with age, however, there did differ significantly after 60 m in crutch walking(p<0.05). 3. In myocardial oxygen consumption($MVO_{2}$), there was no significantly change between before walk and after 20m in crutch walking with age, however, there did differ significantly after 40 m and 60 m in crutch walking(p<0.01, p<0.001). These result showed that cardiovascular system had a great effect on the olderly when 3-point nonweight bearing ambulation with axillary wooden crutch. Therefore, when train for axillary crutch in the olderly, we needed suitably basis of walking distance.

• 한국항해항만학회지
• /
• 제39권6호
• /
• pp.493-498
• /
• 2015

일반적으로 VTSO(Vessel Traffic Service Operator)는 양 선박의 충돌위험 정도를 판단할 때, 선박들의 침로와 속력, DCPA(Distance to CPA)와 TCPA(Time to CPA) 그리고 양 선박의 조우상황 등을 종합적으로 고려한다. 이에 본 연구에서는 CPA에서의 양 선박 상대방위에 따른 충돌위험도 계산 알고리즘을 제안하고, 알고리즘의 타당성을 검증하기 위하여 다양한 조우상황별 충돌위험도 측정에 대한 VTSO의 설문조사를 실시하였다. 그 결과, 제안한 알고리즘에 의한 위험도 평가 결과와 VTSO의 설문결과 사이에 높은 상관관계가 있음이 확인되어 제안한 알고리즘의 유효성을 검증하였다.

• 한국지진공학회논문집
• /
• 제23권6호
• /
• pp.289-299
• /
• 2019

The tendency to use a probabilistic design method rather than a deterministic design method for the design of nuclear power plants (NPPs) will increase because their safety should be considered and strictly controlled in relation to various causes of damage. The distance between a seismically isolated NPP structure and a moat wall is called the clearance to stop. The clearance to stop is obtained from the 90th percentile displacement response of a seismically isolated NPP subject to a beyond design basis earthquake (BDBE) in the probabilistic design method. The purpose of this study is to analyze the effects of heating and buckling effects on the 90th percentile displacement response of a lead-rubber bearing (LRB) subject to a BDBE. The analysis results show that considering the heating and buckling effects to estimate the clearance to stop is conservative in the evaluation of the 90th percentile displacement response. If these two effects are not taken into account in the calculation of the clearance to stop, the underestimation of the clearance to stop causes unexpected damage because of an increase in the collision probability between the moat wall and the seismically isolated NPP.