• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.85-95
• /
• 2019

This work shows how to design a robot structure and to control to overcome obstacles while traveling through ducts of various diameters and shapes by three-legged robot. Circuits are centered in the body to connect the three wheel bodies that are driven around the center body with the 4-section slider link structure. Also, the springs are used to contract and expand the robot legs so that it can be caparable of various environments. Geared motor, spring, and belt were selected based on the static and dynamic calculation to be suitable to horizontal and vertical travels. The center body is equipped with a camera and the distance sensors, and a control algorithms are implemented so that it can be successfully performed in L-type and T-type ducts. Using UWB modules and trilateration algorithm, the location of the duct-cleaning robot inside the duct could be identified successfully.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.42-47
• /
• 2014

Objective : Helicopter ambulance transport (HAT) is a highly resource-intensive facility that is a well-established part of the trauma transport system in many developed countries. Here, we review the benefit of HAT for neurosurgical patients in Korea. Methods : This retrospective study followed neurotrauma patients who were transferred by HAT to a single emergency trauma center over a period of 2 years. The clinical benefits of HAT were measured according to the necessity of emergency surgical intervention and the differences in the time taken to transport patients by ground ambulance transport (GAT) and HAT. Results : Ninety-nine patients were transferred to a single university hospital using HAT, of whom 32 were taken to the neurosurgery department. Of these 32 patients, 10 (31.3%) needed neurosurgical intervention, 14 (43.8%) needed non-neurosurgical intervention, 3 (9.4%) required both, and 11 (34.4%) did not require any intervention. The transfer time was faster using HAT than the estimated time needed for GAT, although for a relatively close distance (<50 km) without ground obstacles (mountain or sea) HAT did not improve transfer time. The cost comparison showed that HAT was more expensive than GAT (3,292,000 vs. 84,000 KRW, p<0.001). Conclusion : In this Korean-based study, we found that HAT has a clinical benefit for neurotrauma cases involving a transfer from a distant site or an isolated area. A more precise triage for using HAT should be considered to prevent overuse of this expensive transport method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1481-1487
• /
• 2014

Recently, with the popularization of smartphones, augmented reality has become even more familiar to the public as an application that can provide realistic images as a tool for location-based services. Therefore, as a location-based application for smartphones that is appropriate for the application of augmented reality technology, the study develops a golf information system. Golf is the sport for which we should exactly know the accurate shape or distance to the destinations or obstacles, so the sport is suitable for applying the augmented reality technology. Even though the sport of golf has constantly increasing population to play it with the popularization of it, presently released golf-related smartphone apps are established as 2D images or in GPS basis; thus, they lack a sense of realism unfortunately. Thereupon, this study develops a golf information system by modifying and complementing usefully Mixare, the open source for augmented reality, for the sport of golf into an augmented reality-based system that can provide various information according to the actual environment of the golf course and describes how to apply it actually to the golf course.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.143-151
• /
• 2009

In this paper, a new extraction algorithm for artificial structure in 3D cloud points of terrestrial LIDAR is described, considering that various obstacles in terrestrial LIDAR make it difficult to apply conventional algorithms which are designed for air-born LIDAR data. Firstly we use the R, G, B color information from the terrestrial LIDAR data to discriminate among the massive 3D cloud points. Hough transform is then applied to estimate the straight lines that correspond to the target structure. Finally, the structure is extracted by comparing the distance between the estimated line and 3D cloud points. The proposed algorithm is efficient in the sense that it requires the user interaction only when the reference colors are obtained. Computer simulation shows the performance to be quite satisfactory.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.93-95
• /
• 2013

The conventional assistive tool for visually impaired people provide Simple service using a ultrasound, or an RFID tag to identify the obstacles. It is impossible to clear guide and has a vulnerability to unforeseen circumstances because of short recognition distance, The ARM Cortex-A9 Platform based implementation of the Portable Navigation System and Service Center will help the visually impaired gait. The Service Center will also provide solution for the lack of jobs due to the increase of the aging population. Navigation System that the visually impaired can carry possessing devices such as a camera, GPS, Audio, Ethernet transmit Image shown at the location of the visually impaired, GPS information and Sound Via TCP / IP. The staff of the service center receives information and can provide directions by communicating with them. So, the system can provide effective guidance to the visually impaired.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.78-83
• /
• 2007

Robot collects surrounding information to recognize tile unknown environment by using various sensors such as visual, infrared ray and ultra sonic sensors. Although visual sensor is the most popular one, it has some difficulties in collecting data in dark or too bright environment due to sensitivity of the light. It also requests significant amount of calculation on collecting data from certain images with marked, straight and curved ones. As an alternative, ultra sonic sensor can simply overcome this visual sensing system's flaw and easily be used. It is easier than visual system, especially in case of collecting data on object and distance in dark environment. Ultra sonic sensor can replace the expensive visual sensing system not only in avoiding obstacles but also in reaching to the target area smoothly. The purpose of this paper is to develop the algorithm to optimize the environmental recognition, path planning and free-ranging by minimizing errors caused by inaccurate information and by considering characteristics of the ultra sonic rays such as refraction and diffusion. This paper also realizes the system that can recognize the environment and make the appropriate path planning by applying the algorithm on this moving robot.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.7-13
• /
• 2017

This study will provide a practical plan of engineering education through the study of major activities connected with the production of works to accomplish the graduation conditions by completing the comprehensive design subject and the result of the performance. The designed subject is to measure the minimum safety distance during driving using the obstacle detection function of the ultrasonic sensor and to perform the avoidance algorithm based on the measurement value of the acceleration gyro sensor. It is proposed an access surveillance system that minimizes the damage of drones, surrounding objects, and people, and improves air mobility. Experimental results show that the obstacles around the drone are detected by five ultrasonic sensors and the difference of output value is applied to each motor of the drone and obstacle avoidance is confirmed. In addition, the content and level of the data for measuring the achievement of learning achievement in the engineering education certification program were used and the results were confirmed to be consistent with the description of the engineering problem level required for the graduates of 4-year engineering college.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.3
• /
• pp.133-141
• /
• 2020

In this paper, the communication method of data information accepted by underwater drones and the implementation method to console display of data information were described, and the function of integrated monitoring system interface and the design and implementation of sonar interface were explained. The operation and posture of underwater drones can be controlled using a controller connected to the console, and the distance information between underwater drones and obstacles is obtained from sonar so that they can be visually displayed on the console screen along with camera images. The integrated monitoring navigation console is implemented to suit improvements, making it convenient and easy for workers to use. In addition, by upgrading integrated monitoring and control software functions, the company added user-specific project management functions and the output of reports for hull inspection to make them different and competitive from other underwater drones.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.157-164
• /
• 2022

In this paper, we describe how to implement the mountainous terrain, radar, and air defense network for UAV path planning in a 3-D environment, and perform path planning and re-planning using the PRM algorithm, a sampling-based path planning algorithm. In the case of the original PRM algorithm, the calculation to check whether there is an obstacle between the nodes is performed 1:1 between nodes and is performed continuously, so the amount of calculation is greatly affected by the number of nodes or the linked distance between nodes. To improve this part, the proposed LineGridMask method simplifies the method of checking whether obstacles exist, and reduces the calculation time of the path planning through parallelization. Finally, comparing performance with existing PRM algorithms confirmed that computational time was reduced by up to 88% in path planning and up to 94% in re-planning.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1311-1316
• /
• 2021

In this paper, we present a bifocal stereo camera system combining two cameras with different focal length cameras to generate stereoscopic image and their corresponding depth map. In order to obtain the depth data using the bifocal stereo camera system, we perform camera calibration to extract internal and external camera parameters for each camera. We calculate a common image plane and perform a image rectification for generating the depth map using camera parameters of bifocal stereo camera. Finally we use a SGM(Semi-global matching) algorithm to generate the depth map in this paper. The proposed bifocal stereo camera system can performs not only their own functions but also generates distance information about vehicles, pedestrians, and obstacles in the current driving environment. This made it possible to design safer autonomous vehicles.