• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.339-345
• /
• 1998

The purpose of this paper is to investigate the effect of the specimen geometries on the pin bearing strength of the angle ply carbon fiber reinforced composites. The effect of the edge distance and the specimen width on the pin bearing strength of angle ply CFRP composites are experimentally investigated in this paper. As results, the failure mode and pin bearing strength of mechanical joints turned out to depends on the stacking sequence and specimen geometries such as the edge distance and the specimen width. The higher pin bearing strength obtained for the angle ply CFRP composites is attributed to a combination of debonding, pull out, buckling and breakage of fiber and also the matrix cracking.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.127-135
• /
• 1994

In this paper we propose an EWLD(Enhanced Weighted Levenshtein Distance) algorithm to organize code-string pattern matching linear array processor based on the mappting to an one-dimensional array from a two-dimensional matching matrix, and design a processing element(PE) of the processor, N PEs are required instead of NS02T in the processor because of the mapping. Data input and output between PEs and all internal operations of each PE are performed in bit-serial fashion. The bit-serial operation consists of the computing of word distance (WD) by comparison and the selection of optimal code transformation path, and takes 22 clocks as a cycle. The layout of a PE is designed based on the double metal $1.5\mu$m CMOS rule. About 1,800 transistors consistute a processing element and 2 PEs are integrated on a 3mm$\times$3mm sized chip.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.513-518
• /
• 2000

Surface roughness is one of the most important parameters to estimate quality of products. As this reason. so many studies were carried out through various attempts that were contact or non-contact using computer vision. Even though these efforts, there were few good results in this research. However, texture analysis is making a important role to solve these problems in various fields including universe, aviatiion, living thing and fibers. In this study, texture parameter was obtained by means of position operator according to variation of angle direction and distance. As a result, it was found that surface texture was more effected by direction then distance

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.613-620
• /
• 2012

In most cases of multidimensional scaling(MDS), the distances or dissimilarities among units are assumed to be symmetric. Thus, it is not an easy task to deal with asymmetric distances. Asymmetric MDS developed so far face difficulties in the interpretation of results. This study proposes a much simpler asymmetric MDS, that utilizes the notion of "altitude". The analogy arises in mountaineering: It is easier (more difficult) to move from the higher (lower) point to the lower (higher). The idea is formulated as a quantification problem, in which the disparity of distances is maximally related to the altitude difference. The proposed method is demonstrated in three examples, in which the altitudes are visualized by rainbow colors to ease the interpretability of users.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.211-216
• /
• 1995

In this study, the piezoelectric ceramics/polymer composite transducers with 1-3 connectivity have been studied. A piezoelectric ceramics PZT prepared by Wet-Dry Combination method was used as a filler in polymer matrix Eccogel. We've got the pulse-echo response for 1-3 type piezc-electric composite transducers in water. It was shown that the transmitting and receiving sensitivity of 1-3 type piezoelectric composite transducers could be improved in comparison with that- of solid PZT transducers. The reason is for that 1-3 type Piezoelectric composites have low dielectric constant and density. There was in a good agreement between the resonant frequencies calculated from one period and observed results on the Ultrasonic Transducer Analyzer. According to these results we could be figured out the distance in water by virture of the pulse-echo response.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.1
• /
• pp.5-10
• /
• 2002

This study was performed to investigate the influence of spraying condition to the coating layer properties of Fe-Cr-Ni-Mo-Si-B alloy using the HVOF. The investigations, such as thickness measurement, surface roughness, hardness, friction coefficient, resistance of corrosion were carried out. Matrix is prepared by gritting and coating layer is made of Fe-Cr-Ni-Mo-Si-B alloy powder using HVOF. Alumina gritting layers are superior to steel gritting layers. The less spaying distance, the more coating layer properties confirmed. The optimum spraying condition, in this study, was proved as 13inch spraying distance with feed rate 350rpm (78g/min).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.161-163
• /
• 2011

최근 몇 년사이 CCTV에 대한 활용도와 중요성이 대두되고 있으며, CCTV의 해상도 또한 SD급 CCTV에서 HD급 CCTV로 대부분 전환되고 있는 상황이다. HD급 CCTV는 고화질, 고해상도를 제공하는 장점을 갖지만, 많은 데이터 량으로 인해 실시간 처리가 어려운 문제점 또한 포함하고 있다. 또한 CCTV는 지능형 CCTV로의 기술적인 진보를 거듭하고 있으며, 대표적인 solution으로 증강현실(AR:Augmented Reality)을 꼽을 수 있다. 본 논문에서는 HD-CCTV의 최대 장점이라고 할 수 있는 실시간 영상에 선박의 정보(AIS : Automatic Identification System)을 결합하여 실시간으로 항만을 모니터링 하는 시스템을 구현하였다. 또한 750mm Zoom Lens를 탑재한 PanTilt 장비를 이용하여 선박을 targeting 하는 시스템 또한 구현하였다. 증강현실을 이용하여 실시간 영상과 선박 정보를 결합하였으며, 이를 구현하기 위해 perspective projection 방법을 통해 3차원 공간좌표계를 2차원으로 투영하였다. 실시간 처리를 위해 입력영상을 Block으로 분할하여 목적 좌표를 검색하였으며, 선박정보의 부드러운 이동을 위해 Dead Reckon 기법과 linear prediction 방법을 이용하여 선박 위치를 예측하였다. 마지막으로 삼각측량법에 기반하여 현재 PanTilt 장비를 목적된 장소로 이동시키는 시스템을 구현하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1176-1178
• /
• 2016

We propose some binary locally repairable codes with locality 2 uising a parity-check matrix. The minimum distance of the proposed codes is 6. The proposed codes are optimal in the sense of achieving the upper bound of dimension for given length, minimum distance, and locality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.93-96
• /
• 2022

DTW can eliminate gaps between sequences of different lengths and find out the similarity of patterns, but due to the time and space complexity, it requires a high computational cost on large datasets. In this paper, we propose a DDTW algorithm that not only reduces computational costs but also has no error in the results. In addition, the algorithm complexity of DTW and DDTW is compared by measuring the computational time according to the length of the sequence. Simulation results show a noticeable reduction in computational time in DDTW compared to DTW.

• Journal of applied mathematics & informatics
• /
• v.41 no.4
• /
• pp.723-739
• /
• 2023

In this paper, we developed three theoretical models based on prey and predator that exhibit holling-type response functions. In both a fuzzy and a crisp environment, we have provided a mathematical formulation for the prey predator concept. We used the signed distance method to defuzzify the triangular fuzzy numbers using the alpha-cut function. We can identify equilibrium points for all three theoretical models using the defuzzification technique. Utilizing a variational matrix, stability is also performed with the two species model through three theoretical models. Results are presented, followed by discussion. MATLAB software is used to provide numerical simulations.