• 한국멀티미디어학회논문지
• /
• 제16권9호
• /
• pp.1109-1118
• /
• 2013

최근 들어 S3D 콘텐츠가 광범위하게 대중화되고 있다. 하지만, 일부의 사람들은 3D 정보를 정확하게 인지하지 못하고 있다. 기존의 입체시 검사 도구는 입체의 인지 여부를 판단하는 테스트만 수행하고, 피험자가 인지하는 정확한 깊이 정보를 측정할 수 없다. 따라서 정확하게 측정할 수 있는 검사도구가 필요하다. 본 논문에서는 3D 콘텐츠 깊이 측정기 및 측정기에 적합한 3D 콘텐츠를 제작하고, 3D 오브젝트의 양안시차(disparity)에 대한 피험자가 인지하는 3D 오브젝트의 돌출거리를 측정하고, 이론값(예측값)과 측정값을 비교 및 관계를 분석하였다. 그 결과 측정값은 이론값보다 약간 크게 나타났으며, 돌출거리가 클수록 편차가 크게 나타났다.

• 대한원격탐사학회지
• /
• 제18권1호
• /
• pp.53-59
• /
• 2002

The MSC is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a GSD(Ground Sample Distance) of 1 m over the entire FOV(Field Of View) at altitude 685 km. The instrument is designed to haute an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data compression/storage. The MSC instrument has one channel for panchromatic imaging and four channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI(Time Belayed Integration) CCD(Charge Coupled Device) FPA(Focal Plane Assembly). The MSC hardware consists of three subsystem, EOS(Electro Optic camera Subsystem), PMU(Payload Management Unit) and PDTS(Payload Data Transmission Subsystem) and each subsystems are currently under development and will be integrated and verified through functional and space environment tests. Final verified MSC will be delivered to spacecraft bus for AIT(Assembly, Integration and Test) and then COMSAT-2 satellite will be launched after verification process through IST(Integrated Satellite Test). In this paper, the introduction of MSC, the configuration of MSC electronics including electrical interlace and design of CEU(Camera Electronic Unit) in EOS are described. MSC Operation parameters induced from the operation concept are discussed and analyzed to find the influence of system for on-orbit operation in future.

• 구강회복응용과학지
• /
• 제22권2호
• /
• pp.173-180
• /
• 2006

Objectives The aim of this study is to compare the quality of root canal preparation completed using MFile-$System^{(R)}$ instrument ( Komet, Gebr.Brsaseler, Germany) and conventional stainless steel file in the canals of Maxillary molar teeth that had a canal curvature between $25^{\circ}$ or more Materials & Methods Buccal canals of 24 first and second maxillary molar teeth, extracted for periodontal and prosthetic reasons were used. Tissue fragments and calcified debris were removed from teeth by scaling and the teeth were stored in 10% formalin solution for 24 hour. Then, teeth were stored in saline until used. To be included the roots had to have completed formed apices and angle of curvature ranging between $25^{\circ}$ or more according to the criteria described by Schneider(1971). Palatal and Second mesiobuccal canals were not included. Teeth were embedded into transparent acrylic. The teeth were randomly divided into two experimental groups. All teeth were scanned by Dental CT (PSR9000N, Asahi, Japan) to determine the root canal shape before instrumentation. Image slices were prepared from the apical end point to the pulp chamber. The first two sections were 2 mm from the apical end of root and 2 mm below the orifice. Further section was recorded, dividing the distance between the sections of apical and coronal levels into two equal lengths. 12 teeth were instrumented using stainless steel fileand another 12 teeth were instrumented using MFile-$System^{(R)}$. Following the completion of the instrumentation, the teeth were again scanned and compared with the cross sectional images taken prior to canal preparation. Amount of transportation and centering ability was assessed. Student's t-test was used for statistical analysis. Result Less transportation occurred with MFile-$System^{(R)}$ rotary instrumentation than stainless steel instrument. MFile-$System^{(R)}$ had better centering ability than stainless steel instrument. Conclusion MFile-$System^{(R)}$ rotary instrumentation transported canals less and had good centering ability.

• 대한원격탐사학회지
• /
• 제14권3호
• /
• pp.223-231
• /
• 1998

해양생물학 연구를 위해 전세계 바다색 관측을 수행하게 될 아리랑 1호 위성(Korean Multi-Purpose SATellite. KOMPSAT)의 탑재체 Ocean Scanning Multispectral Imager(OSMI)를 개발하였다. OSMI는 관측폭 800km 이내에서 1km 이하의 지상해상도를 갖고 whisk-broom 주사 기법으로 해양표면의 영상을 얻는다. OSMI는 3년의 수명 동안 20%의 궤도 운영 duty cycle을 갖으며 궤도 운영 중 영상 자료의 gain/offset 조정이 가능하고 영상자료 저장 기능이 내장되도록 설계되었다. 궤도 운영 중 센서 보정을 위해 OSMI는 태양 보정과 암흑 보정을 수행한다. OSMI는 2차원 Charge Coupled Device(CCD) Focal Plane Array(FPA)를 사용하는 다중 분광 촬영기로서 400nm에서 900nm가지의 파장 대역에 대한 결상이 가능하다. 이 파장대역 중에서 궤도 운영 중 지상명령을 통해 선택되는 6개 분광 채널을 사용하여 해양표면이 관측된다. 센서 성능은 지상 특성 시험 단계에서 412, 443, 490, 510, 555, 670, 765 그리고 865nm의 8개 분광 대역에 대해 측정되었다. 이 지상 특성 시험 결과와 더불어 태양/암흑 보정이 궤도 분광 채널 선택 및 보정에 사용될 것이다. 운영중 분광 채널 선택 기능은 바다색 관측 및 해양생물학 연구에 큰 유연성을 줄 것이다.

• 대한통합의학회지
• /
• 제12권3호
• /
• pp.143-153
• /
• 2024

Purpose : Forward head posture (FHP), characterized by the anterior positioning of the head relative to the spine, is a common postural deviation that can lead to neck pain, reduced mobility, and muscle imbalances. Recently, high-frequency deep heat therapy (HFDT) has been gaining attention for the intervention of FHP. This research aims to investigate the efficacy of HFDT in comparison to instrument assisted soft-tissue mobilization (IASTM) for treating FHP among 30 young adults. Methods : Participants were randomly assigned to either the HFDT or IASTM group. The study focused on examining changes in neck joint mobility, pain thresholds, rounded shoulder distance, lower trapezius muscle strength, and neck dysfunction. Measurements were taken before and after the interventions. Paired t-tests were used for within-group analyses, and independent t-tests were employed for between-group comparisons. The statistical significance level α was set to .05. Results : Statistically significant improvements were observed across all measured parameters in both groups (p<.05). The HFDT group showed significantly greater enhancements in neck joint mobility, pain thresholds, rounded shoulder distance, lower trapezius muscle strength, and neck dysfunction parameters. Specifically, HFDT was more effective than IASTM in improving neck joint mobility, right upper trapezius pain threshold, left rounded shoulder distance, and right lower trapezius strength. The only exceptions were neck flexion range of motion, left upper trapezius pain threshold, right rounded shoulder distance, and left lower trapezius strength, where no significant differences were found between the groups. Conclusion : The findings suggest that HFDT, by combining the benefits of high-frequency therapy and manual therapy, effectively alleviates upper trapezius muscle pain and tension, enhances neck mobility, and strengthens lower trapezius muscles. Thus, HFDT could be considered a valuable intervention for clinicians aiming to address FHP and associated musculoskeletal problems.

• 한국항행학회논문지
• /
• 제3권2호
• /
• pp.139-146
• /
• 1999

비행 시뮬레이터는 엔진 모듈, 항법장치 모듈, 계기 모듈로 구성된다. 여기에는 두 가지의 문제점을 가지고 있다. 첫째는, 각 모듈별로 사용하는 좌표계가 서로 다르다는 점이다. 이를 해결하기 위해 본 논문에서는 각기 독자적인 좌표계를 일치시키기 위한 방법을 고안하였다. 둘째는, 지구 형태가 완전한 구 모양을 따르고 있다고 가정하고 구 삼각공식을 이용하여 거리와 방위각을 계산하게 되면 많은 연산량이 요구된다. 본 논문애서는 근거리 비행시 구 삼각공식 대신 평면 근사화 방식을 사용함으로써 우수한 결과를 얻음을 확인하였다. 연산 속도는 구 삼각공식 사용시 $4.95{\times}10^{-4}$초에서 평면 근사화 방식을 사용시 $1.648{\times}10^{-4}$초로 향상됨을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.605-610
• /
• 2014

Clouds play an important role in climate change, in the prediction of local weather, and also in aviation safety when instrument assisted flying is unavailable. Presently, various ground-based instruments used for the measurements of the cloud base height or velocity. Lidar techniques are powerful and have many applications in climate studies, including the clouds' temperature measurement, the aerosol particle properties, etc. Otherwise, it is very circumscribed in cloud velocity measurements because there is no Doppler effect if the clouds move in the perpendicular direction to the laser beam path of Doppler lidar. In this paper, we present a method for the measurement of cloud velocity using lidar's range detection and DIC (Digital Image Correlation) system to overcome the disadvantage of Doppler lidar. The lidar system acquires the distance to the cloud, and the cloud images are tracked using the developed fast correlation algorithm of DIC. We acquired the velocities of clouds using the calculated distance and DIC algorithm. The measurement values had a linear distribution.

• 대한가정학회지
• /
• 제33권3호
• /
• pp.43-57
• /
• 1995

The purpose of this study is to explore the characteristics of interaction between the social support network and the korean eldery and to provide information on the structure and function of the social network which influences the life satisfaction in the aged. The sample of this study was selected from the elderly living in korean urban and rural areas. 213 out of urban respondent and 350 out of rural respondent were selected as data sources. The methodological instrument was the questionnaire. The major findings of this study can be summarized as follows : 1. most of the elderly had the relationship with all kinds of social support network-family, kin, neighbors and friends. 2. the elderly having contact with all kinds of the social support network showed the highest life satisfaction. 3. the size, the frequency and the distance weren't important factors in influencing the family, the kin and the neighbors support network in the urban elderly. In the rural elderly the size was an important factor in all the support network. Also the frequency had effect upon all networks except the neighbors and the distance had significant effect upon the family support network. 4. In the urban elderly the friends support network had the positive correlation with life satisfaction. the rural elderly having contact with all kinds of the social support network showed high life satisfaction.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.149-159
• /
• 1998

The importance of soundness and safety evaluation in weld zone using by the ultrasonic wave has been recently increased rapidly because of the collapses of huge structures and safety accidents. Especially, the ultrasonic method that has been often used for a major non-destructive testing(NDT) technique in many engineering fields plays an important role as a volume test method. Hence, the defecting any defects of weld Bone in austenitic stainless steel type 304 using by ultrasonic wave and neural network is explored in this paper. In order to detect defects, a distance amplitude curve on standard scan sensitivity and preliminary scan sensitivity represented of the relation between ultrasonic probe, instrument, and materials was drawn based on a quantitative standard. Also, a total of 93％ of defect types by testing 30 defect patterns after organizing neural network system, which is learned with an accuracy of 99％, based on ultrasonic evaluation is distinguished in order to classify defects such as holes or notches in experimental results. Thus, the proposed ultrasonic wave and neural network is useful for defect detection and Ultrasonic Non-Destructive Evaluation(UNDE) of weld zone in austenitic stainless steel 304.

• 센서학회지
• /
• 제31권1호
• /
• pp.64-68
• /
• 2022

Herein, we propose a LoRaWAN-based small draft system that can measure the ocean current flow (speed, direction, and distance) in real time at the request of the Coast Guard to develop a device that can promptly find survivors at sea. This system has been implemented and verified in the early stages of rescue after maritime vessel accidents, which are frequent. GPS signals often transmit considerable errors, so correction algorithms using the improved triangulation method algorithm are required to accurately indicate the direction of currents in real time. This paper is structured in the following manner. The introduction section elucidates rescue activities in the case of a maritime accident. Chapter 2 explains the characteristics and main parameters of the GPS surveying technique and LoRaWAN communication, which are related studies. It explains and expands on the critical distance error correction algorithm for GPS signals and its improvement. Chapter 3 discusses the design and analysis of small draft buoys. Chapter 4 presents the testing and validation of the implemented system in both onshore and offshore environments. Finally, Section 5 concludes the study with the expected impact and effects in the future.