• 한국연소학회지
• /
• 제4권1호
• /
• pp.117-129
• /
• 1999

A method for the mixing augmentation of the transverse injection of fuel in a Scramjet combustor is suggested. Based on the fact that the main factor controlling the mixing characteristics in transverse injection is the effective back-pressure (the pressure around the injection hole) it is tried to make a flow expansion near the injection port in order to reduce effective back-pressure. A three dimensional Navier-Stokes code adopting the upwind method of Roe#s flux difference splitting scheme is used. The k-w SST turbulence model turbulence model is used to calculate the turbulent viscosity. It is shown that the reducing of the effective back-pressure make it possible to increase the penetration distance and to increase the mixing rate without excessive losses of stagnation pressure. Also, it is shown that the streamwise vorticity generated by baroclinic torque has great influences on the mixing process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.141-144
• /
• 2014

In urban spaces surrounded by buildings, trees could disperse sound energy, which affect sound level distribution and street canyon reverberation. Therefore, this paper examines the amount of scattered sound energy from a tree in open field by means of a reverberation time (RT). Five trees of different species and crown sizes were considered. The influential factors include crown size and shape, foliage condition, and source-receiver distance. The results show that RT is proportionally increased with the increase of tree crown sizes, which is the most determining factor. The maximum RT measured was 0.34 sec at 4000 Hz for the studied trees in leaf. The presence of leaves increased RT at high frequencies, typically by 0.14 sec at 4000 Hz. With increasing source-receiver distance within 40 m, RT was slightly changed.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.121-130
• /
• 2001

This paper addresses a method for evaluating perceived velocities of the graphic module in a driving simulator. The major two graphic factors associated with perceived velocities are analyzed: they are the lateral distance between a virtual driver and an array of environmental objects and the textural density of these objects. A graphical representation of a vehicle and its surrounding environment are constructed by employing a three-dimensional tool, Pro/ENGINEER and a virtual environment, dVISE. Using the developed virtual driving environment, experiments have been carried out to formulate the relationship between velocity perception and each factor. Based on the experimental results, nonlinear regression equations are derived to show how the perceived velocities are dependent upon distance/density.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.260-262
• /
• 2004

Spatial database system provides many query types and most of them are required frequent disk I/O and much CPU time. k-NN search is to find k-th closest object from the query point and up to now, several k-NN search methods have been proposed. Among these, MINMAX distance method has an aim not to visit unnecessary node by applying pruning technique. But this method access more disk than necessary while pruning unnecessary node. In this paper, we propose new k-NN search algorithm based on density of object. With this method, we predict the radius to be expected to contain k-NN object using density of data set and search those objects within this radius and then adjust radius if failed. Experimental results show that this method outperforms the previous MINMAX distance method. This algorithm visit fewer disks than MINMAX method by the factor of maximum $22\%\;and\;average\;6\%.$

• 국제물리치료학회지
• /
• 제4권2호
• /
• pp.557-561
• /
• 2013

The purpose of this study to identified the effect of muscle strengthening of ankle joints on postural sway. The subjects of this study were 29 healthy adults aged between 20 and 30 years(male 18, female 11). All subjects received ankle muscle strengthening exercise for 3 times, 3 sessions, 30 minutes per week over 4weeks period. The measured item of muscle strength, postural sway. Data collected from all subjects the result were as follows. The ankle strength showed significant increase(p<.05). One leg stand test with eye close increase in static balance(p<.05), left-right sway distance and anterior-posterior sway distance with eye open and close in static balance(p<.05). The result findings show that strength of the ankle joint muscles is a factor which affects postural sway and the ankle joints are important in static balance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1363-1365
• /
• 1999

This paper Presents an algorithm for the computation of fault location for a transmission line by means of the voltage and current signals. It is impossible to calculate the accurate fault distance, because of the fault resistance and fault current which are unknown. All Currents in the lines are divided by the current distribution factor, so the fault current through the fault resistance can be represented by using data from one terminal of transmission line. This algorithm proposed can calculate the fault distance with only the faulty phase information.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.335-337
• /
• 2009

A scanning electron microscope(SEM) is a system that visualizes complex surface features. The resolution of SEM is affected by each of equipment components. In this study, we examined the effects of the four factors including the beam current, magnification, voltage and working distance. A statistical analysis was conducted to investigate the main and interaction effects. For a systematic characterization, a $2^4$ full factorial experiment was conducted. The $R^2$ of constructed statistical model was 88.9%. The main effect revealed that the current and working distance are dominant factors. Of the interactions, those between the current and voltage yielded the highest interaction. 3D plots generated from the model were used to explore various parameter effects.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.836-842
• /
• 2015

In this paper, the target size and model based target size estimator (TMBE) algorithm is presented for iimaging infrared (IIR) seeker. At the imaging seeker, target size information is important factor for accurate tracking. The model based target size estimator filter (MBEF) algorithm was proposed to estimate target size at imaging infrared seeker. But, the model based target size estimator filter algorithm need to know relative distance from the target. In order to overcome the problem, we propose target size and model based target size estimator filter (TMBEF) algorithm which based on the target size. The performance of proposed algorithm is tested at target intercept scenario. The experiment results show that the proposed algorithm has the accurate target size estimating performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.579-583
• /
• 2001

Cause of noise/vibration for the sheet feeding apparatus of digital MFP is investigated by analyzing the measured sound pressure and the strategy for reducing the noise level is suggested. Factors related to the noise/vibration are found by loading test and the measurement of the noise by assembling the components. By checking the center distance between gears and the boss height, precision of assembly is identified as a main factor of noise. From the result of analysis, it can be concluded that the noise level of sheet feeding apparatus can be reduced by maintaining the distance between gears and the precision of assembly adequately.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.811-814
• /
• 2001

Warpage analysis of bobbin, molded by injection molding process was performed. Concerned with a mold design, cooling system was designed based on Taguchi method, the distance between cavity wall and cooling channel was most influent factor amongst four design variables like an inlet temperature of coolant, a coolant flow rate, a diameter of cooling channel, and the distance between cavity wall and cooling channel. Optimal packing processes to reduce the warpage of molded part was analyzed based on the response surface method by considering holding pressure. Their optimal processing conditions were 9.4 seconds, 5.3 seconds, 15.2 seconds, and 85MPa, respectively.