• 한국공간구조학회논문집
• /
• 제14권4호
• /
• pp.55-64
• /
• 2014

In this study, Intersecting Tensegrity System that is integrated solid compression members with tension members was presented. This system is set up by connecting upper and lower compression members of pyramid shape with exterior tension members. In this system, the solid compression members are intersected each other and connected by a tension member in the center. This system is a variation of Tensegrity system, has a improved feature that the system is able to induce prestresses in all of tension members easily by adjusting the distance of a tension member in the center. The proposed system was studied by modeling, and the structural behavior of the system was investigated by mechanical analysis of the model. Furthermore, the features of the structural behavior variations was investigated when the composition elements(total height, size of surface, intersection length, etc.) are changed variously. It was also showed that the system is able to be used as a temporary space structure system with a membrane roof of inverse conical shape.

• 대한의용생체공학회:의공학회지
• /
• 제38권4호
• /
• pp.211-217
• /
• 2017

During the emergency situation such as cardiac arrest, cardiopulmonary resuscitation(CPR) is the most important treatment to maintain patient's blood circulation. Since the quality of CPR can not be easily measured or evaluated by the eye, an assistive device with an accelerometer can help to assess the pressure depth of CPR. In this study, we propose a single frequency analysis method to reduce the error of the accelerometer by extracting only one frequency component from the Fourier transform process. To verify the effectiveness of the single frequency analysis, acceleration data at CPR conditions were measured at a sampling rate of 50 / sec using a wristband equipped with an acceleration sensor. Then, We compared the existing distance estimation method and the single frequency analysis method using the measured data. The amplitude value proportional to the compression depth was obtained by applying the single frequency analysis method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.192-194
• /
• 2005

Acceptance of the international standards for video compression, such as H.261, MPEG-1 and MPEG-2, along with the developments in video codec hardware, has created an explosion of application. Among these, the long time quest for long-distance digital video transmission causes an increasing interest in transporting compressed video over networks which are nontraditional for this purpose, including asynchronous transfer mode networks, the Internet, and cellular and wireless channels. Transmission of compression video over packet network is improved for error resilience. And layered video coding techniques improves error resilience. We present a efficient method of scalable video coding for low bandwidth.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.37-47
• /
• 1996

This paper presents an automatic tele-inspection scheme for the remotely manufacturing process. The remote-manufacturing process is continuously monitored and a crucial process is captured by CCD Camera. The captured image is compressed by neural network and JPEG, and it is sent directly to the assembly plant for incoming inspection. Massive image data require broadband channel to transmit them to remote distance, but sender is able to transmit them to receiver in use common channel by compressing massive image data in the high ratio. After the receiver reconstructs the compressed image to be transmitted, the reconstructed image is also directly used for automatic inspection of the process. The Experimental results show that the proposed inspection mechanism could be effectively implemented for real applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.115-118
• /
• 2002

The purpose of this paper is to design a pick-up for the small form factor optical disk drive and to fabricate a micro-compensatory lens for the pick-up using the micro-compression molding process. At design stage, the optical elements including the objective lens and the compensatory lens are miniaturized. The height of pick-up and free working distance are designed as 2mm and 0.2% respectively. To analyze the fabricated micro-compensatory lens, the system was analyzed using the surface profile of the fabricated micro-compensatory lens and CODE V which is commercial software. The RMS wave front aberration of the system using fabricated micro-compensatory lens is 0.01677λ which is lower than Marechal's criterion, 0.07λ.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.1039-1046
• /
• 2006

The numerical simulations on the train entering a tunnel are performed by solving unsteady axi-symmetric problems. To reduce the effects of the pressure wave generated by the train starting abruptly, several starting methods of the train are examined. The high order velocity increase gives better results than those for the linear velocity increase. The high order velocity increase gives good results for the pressure rise by the train entering a tunnel, too. The distance to the train reaches the highest running velocity from the start should be more than 60 m when the train speed is 350 km/h.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.529-532
• /
• 1999

With increasing use of high-strength concrete tied columns in structural engineering, it becomes necessary to examine the applicability of related sections of the current design codes. This experimental study was conducted to investigate the behavior of eccentrically loaded high-strength concrete columns. Column specimens with concrete strength 234, 437, 703kgf/㎠ were tested under monotonically increasing eccentric compression. The test parameters included the longitudinal reinforcement ratio, eccentric distance and concrete compressive strength. The analytical results obtained from the stress-strain relationship and the ACI's equivalent rectangular stress block are compared with experimental test results.

• 한국포장학회지
• /
• 제7권2호
• /
• pp.25-30
• /
• 2001

Corrugated board is composed of cellulose fibers which are arranged with the same direction as the board manufactured. The direction is classified with machine direction (MD) and cross-machine direction (CD). Therefore, corrugated board is orthotropic material that has totally different strength properties at each direction and especially, at machine direction, the mechanical properties of fiberboard is superior. The compression strength of the corrugated fiberboard boxes is very important information to the manufacturers and the end users. This study was carried out to design the optimum pattern, size, and location of ventilating hole for ventilating container through the finite element analysis. The optimum pattern and location of ventilating and hand hole were vertical oblong, a short distance to the right and left from the center of panel, and center or a short distance to the top of both sides, respectively. We identified the effect on both stress dispersion and stress level from the analysis of redisigned hand hole.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.13-21
• /
• 2000

Under the mixed mode loading, it has been known that the influence of non-singular terms in the stress fields is serious, because the critical distance, ${\gamma}_o$ - the distance of nonlinear elastic region near the crack tip has no negligible value. In this paper, it has been studied on the influence of non-singular terms, T-stress, and the case of T=0, ${\sigma}cos^2{\beta}$, ${\sigma}cos(2{\beta})$ and $0.05{\sigma}cos(2{\beta})$, under uniaxial tension and compression. It has been seen that the T-stress of ${\sigma}cos(2{\beta})$ has better than others as comparing to the experimental data.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (B)
• /
• pp.400-402
• /
• 2006

임베디드 시스템에서의 코드 압축은 효율성 제고를 위한 필수적인 기법이다. ARM, MIPS등 많은 프로그램 코드에서 현재 시도되고 있으나 한계를 나타내고 있다. 특히, Arm Thumb 코드는 다른 코드 압축과 달리, 아직까지 15%-20%정도의 압축 효율을 보이고 있다. 본 논문은 다양한 값을 갖는 코드의 데이터이지만, 일정 부분에서 특정 값의 발생빈도가 높은 Thumb 코드의 분포를 분석, 그 특성을 활용하였다. 즉, 현재 압축하고자 하는 필드의 값을 코드의 앞부분과 비교해 나가면서, 유사도를 분석 및 압축하고, 거리 정보를 기록하는 방식의 거리 벡터 기법의 압축방법을 고안, 적용하였고, 그 결과 압축효율이 20-25%로 기존의 방법에 비하여 약 5%정도의 효율 향상을 가져 왔다.