• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.77-85
• /
• 2013

In the location science, environmental effect becomes a new main consideration for site selection. For the unwanted facility location selection, decision makers should consider the cost of resolving the environmental conflict. We introduced the negative influence cost for the facility which was inversely proportional to distance between the facility and residents. An unwanted facility location problem was suggested to minimize the sum of the negative influence cost and the transportation cost. The objective cost function was analyzed as nonlinear type and was neither convex nor concave. Three GRASP (Greedy Randomized adaptive Search Procedure) methods as like Random_GRASP, Epsilon_GRASP and GRID_GRASP were developed to solve the unwanted facility location problem. The Newton's method for nonlinear optimization problem was used for local search in GRASP. Experimental results showed that quality of solution of the GRID_GRASP was better than those of Random_GRASP and Epsilon_GRASP. The calculation time of Random_GRASP and Epsilon_GRASP were faster than that of Grid_GRASP.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.710-715
• /
• 1994

The program name TOLAPS is an acronym for Take-Off LAnding Profile Simulation. Some of the interesting features of this program is the ability to detect flight performance effects of airport altitude, ambient temperature, air pressure and wind. TOLAPS can also handle effects of TOW and LW. The program user can also calculate profiles by user difined flaps and thrust settings deviating from recommended standard settings for each aircraft. Wind effects on straight out flying as well as turns can also be demonstrated. Output form TOLAPS are either screen graphics of profiles (altitude, speed or thrust versus flight distance) or flight track. Profiles can also be made in a tabular form, ready for use in most airport noise calculation programs. In this way, TOLAPS is a valuable tool to evaluate effects of noise abatement procedures.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.1-7
• /
• 2008

The wind resource potentials of South Korea are estimated as preliminary stage using the national wind map which has been being established by numerical wind simulation and GIS (Geographical Information System) exclusion analysis. The wind resource potentials are classifying into theoretical, geographical, technical and implementation potentials and the calculation results are verified by comparing to other countries' potentials. In GIS exclusion, urban, road, water body, national parks and steep slope area are excluded from onshore geographical potential while water depth and offshore distance from the shoreline are applied as offshore exclusion conditions. To estimate implementation potential, dissemination records of European countries are adopted which is about 1/8 of geographical potential. The implementation potential of South Korea would correspond 12.5GW which is 1.7 times of the national wind energy dissemination target until 2030.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.469-470
• /
• 2016

본 논문에서 제안하는 실내 위치기반서비스는 현행 송수신 통신에서의 움직이는 사용자를 대상으로 한다. 비콘의 주요 송출 신호인 RSSI 값을 이용하여 거리에 따른 비콘의 RSSI 값을 측정한다. 원거리에서 RSSI 값이 불안정하기 때문에 불안정한 신호를 보정하기 위해 RSSI 측정결과 필터링을 사용하여 원거리에 대한 값을 보정하는 알고리즘에 대해 설계 및 구현한다. 이를 위해 초기 단일파을 중심으로 실내측위가 이루어졌으며, 위치보정 및 오차범위에 대한 보정작업 역시 논의되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.162-162
• /
• 2016

비전도체를 피도금체로 하여 전기 도금을 하는 경우 우선 피도금체 상에 시드 층을 형성 시키고 이후 여러 번의 전기도금을 거치게 된다. 이때 접점의 위치와 전류 인가 방법은 도금 특성에 영향을 미치게 된다. 이를 고찰하기 위하여 접점간 거리에 따른 도금 두께 분포 계산을 하였다. 본 연구에서는 도금 분포 계산을 위해 Elsyca社의 PlatingMaster를 사용하였다. 방향별 도금 두께 분포의 변화를 극명하게 관찰하기 위하여 종횡비 10:1로 음극과 양극 모델링을 하였고 접점의 개수는 1 ~ 3개, 접점의 위치는 10 mm 간격으로 이동하는 것을 변수로 하였다. 피도금체의 시드 층은 니켈 층으로 두께 $0.4{\mu}m$로 설정하고 유산동 도금 용액을 이용하여 용액 데이터베이스 측정하고 반영하였다. 계산을 위한 전류 밀도는 $50mA/cm^2$, 도금시간은 10분으로 모든 모델에서 동일하게 적용하였다. 도금이 성장한 면의 두께를 폭과 길이 방향으로 비교 관찰한 결과 전극간의 거리는 시드 층이 얇을수록 두께 분포에 큰 영향을 미쳤다. 하지만 하지 도금 층의 두께가 충분히 두꺼운 경우 전극간의 거리는 큰 영향을 미치지 않는다.

• Journal of Integrative Natural Science
• /
• v.5 no.2
• /
• pp.120-126
• /
• 2012

This paper describes the algorithm that lowers the dimension, maintains the gesture recognition and significantly reduces the eigenspace configuration time by combining the higher correlation feature information and Principle Component Analysis. Since the suggested method doesn't require a lot of computation than the method using existing geometric information or stereo image, the fact that it is very suitable for building the real-time system has been proved through the experiment. In addition, since the existing point to point method which is a simple distance calculation has many errors, in this paper to improve recognition rate the recognition error could be reduced by using several successive input images as a unit of recognition with K-Nearest Neighbor which is the improved Class to Class method.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.755-759
• /
• 2010

Each four polycyclic aromatic hydrocarbons (PAHs) was reacted with OH radical at $1.5{\AA}$ distance by CAChe MOPAC 2000 program. These results were compared to those reported experimental results. Reaction positions of all four PAHs corresponded with predicted positions in which ${\Delta}$E(HOMO-LUMO) was approximately 4.7. Finally oxygen of OH radical combined with PAH and quinone form of products were produced. These results indicate that the proposed determining the ${\Delta}$E(HOMO-LUMO) can be effectively applied to predict reaction position of recalcitrant compounds such as dioxins, PCBs, POPs, and etc.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1013-1018
• /
• 2010

This paper presents a numerical evaluation of the launch dynamics and thermo-fluid phenomena for gas generator launch eject system. The existing gas dynamic model for launching eject body used ideal gas and adiabatic assumption with empirical energy loss model. In present study, a turbulent Navier-Stokes solver with CHIMERA mesh is employed to predict the detail unsteady thermo-fluid dynamics for the launched body. The calculation results show that proper grid number is necessary for good agreement with experimental data. The important effects for accurate prediction are a gap distance and thermal boundary condition on the wall. The computational results show good agreement with experiment data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2011

A PRT vehicle's control method is presented in this paper. In the asynchronous vehicle control system, vehicles follow their leading vehicles. Leading vehicles are defined differently among the different types of track. The main topic of this paper is to present a method to define the leading vehicle among different types of track and the calculation algorithm of the safety length the following vehicle must maintain. Simulation program is developed using the algorithm and the results of the test run are presented. An asynchronous PRT vehicle control algorithm was presented by Szillat in the paper "A low level PRT Microsimulation, Dissertation, University of Bristol, 2001". But it is different from the algorithm in this paper. In the algorithm proposed by Markus, vehicles in the merging track are controlled synchronously, and its safety distance between the leading and the following car is evaluated after the establishment of the complicated future time-location table instead of simple equations proposed in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2249-2254
• /
• 2008

A non-thermal micron size plasma needle is applicable for medical treatment because it includes radicals, charged particles, ultraviolet emission, and strong electric fields. The electric fields around the plasma needle device driven by a radio frequency wave are investigated in order to calculate the power delivered to the cell. A commercial multi-physics code, CFD-ACE, was utilized for the calculation of electric fields for the optimization of the needle structure. The electric field and energy absorption profiles are presented with the variation of the device structure and the distance between the needle and tissues. The living tissues effectively absorb the radio frequency power from the plasma needle device with the covered pyrex structure.