• 한국표면공학회지
• /
• 제50권4호
• /
• pp.231-236
• /
• 2017

The present work addresses how to measure the amount of dissolved aluminum in phosphoric acid, based on volumetric and gravimetric measurements of the precipitates formed by reaction between the $H_3PO_4$ solution containing dissolved aluminum ions and 10 % KF solution. The volume of the precipitates increased with dilution of the dissolved aluminum-containing $H_3PO_4$ solution up to 1/4 dilution above which it decreased with further dilution. The lowered amounts of the precipitates at low dilution less than 1/4 and high dilution more than 1/4 are attributed to high acidity of the solution and decreased amount of dissolved aluminum in the solution, respectively. Volumetric measurement of the amount of precipitates was found not to be very reliable with the experiments, while weight measurement of the precipitates after drying for 80 min at $60^{\circ}C$ appeared to be very reproducible. In the present work, it is suggested that the amount of Al dissolved in 85 % $H_3PO_4$ solution can be calculated by multiplying 50 to the weight of precipitate obtained by reacting 8 ml of 1/4 diluted $H_3PO_4$ solution containing dissolved aluminum ions with 6 ml of 10 % KF solution.

• KSBB Journal
• /
• 제27권2호
• /
• pp.103-108
• /
• 2012

The harvesting of microalgae is a critical step that precedes biodiesel conversion. The most widely used harvesting technology is flocculation and floatation. In this study, the efficiency of the flocculants aluminum sulfate and poly aluminum chloride were evaluated for harvesting the alga Dunaliella tertiolecta in conjunction with dissolved air floatation. Using the jar test the optimum concentration range for aluminum sulfate was 1.0~1.5 g/L and for poly aluminium chloride, 1.5~2.0 g/L. The degree of coagulation was visualized by microscopy. Further analysis in combination with dissolved air floatation showed that the optimal concentration for aluminum sulfate was 1.1 g/L and for poly aluminum chloride, 1.6 g/L.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.42-52
• /
• 1997

The affection of activated carbon on the dissolved aluminum ion in drinking water has been observed. In addition, the aluminum ion removal capability of activated, alumina, chitosan, and ion exchange resin have been investigated. Experimental results indicated that the coal based activated carbon released considerable amount of aluminum ion to the water while coconut shell based activated carbon didn't. However the release was not continuous. Activated alumina didn't show any recognizable removal capability for aluminum ion in water. Particulate chitosan has removed aluminum ion although dissolved chitosan has not. However it need to development a regeneration process for chitosan to be an effective mean for aluminum ion removal. Ion exchange resin showed a reliable aluminum ion removal capability. The ion exchange capacity was 2.63 meq/g resin for the aluminum ion in drinking water.

• 대한가정학회지
• /
• 제38권2호
• /
• pp.21-26
• /
• 2000

Effect of aluminum dissolution from aluminum sauce pans with the kind and concentration of acidity, boiling times and temperature of acidity solution, in new and old sauce pans, and aluminum content in typical food was investigated. As acetic acid concentration increases, aluminum content has increased. But malic acid and citric acid have suddenly increased until acidity concentration would be 0.4%. After that rapidly increasing is not shown. As boiling time and temperature of acidity solution increases, concentration of aluminum dissolved from aluminum sauce pan has increased. Concentration of aluminum by repeated use has increased only a slightly. But aluminum content has dissolved in large quantities from new pan rather than old pan.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.3-7
• /
• 2007

알루미늄 지금 및 스크랩 용해시 발생되는 알루미늄 폐드로스를 사용하여 황산알루미늄(Alum)과 폴리염화알루미늄(pooly Aluminium Chloride: PAC)을 제조하였다. 알루미늄 폐드로스를 황산과 반응시켜 폐드로스 중에 잔류하는 금속알루미늄을 용액 중으로 침출시켜 황산알루미늄 용액으로 제조하였으며, 알루미늄 폐드로스를 염산과 반응시켜 PAC 용액으로 제조하여 수처리응집제로 재활용하고자 하였다. 이와 같이 알루미늄 폐드로스를 재활용함으로써 수산화알루미늄을 원료로 사용하여 황산알루미늄과 PAC를 제조하는 종래의 방법에 비해 제품의 원료비를 줄일 수 있고, 매립 등으로 폐기시켜야 할 폐드로스의 양을 줄이는 효과가 있었다.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.38-43
• /
• 2009

수산화알루미늄을 원료물질로 하여 알루미늄 유기화합물인 aluminum oxalate 합성실험을 수행하였다. 이를 위해 국산 99.7% 순도의 수산화알루미늄을 옥살산으로 용해하는 방법으로 알루미늄 수용액을 제조하였으며, 실험결과 옥살산 농도 1.0 mole/l, 반응온도 $90^{\circ}C$에서 16시간 용해시 거의 100%에 가까운 용해율을 얻을 수 있었다. 알루미늄 수용액으로부터 aluminum oxalate를 합성하기 위해서는 ethanol/Al solution 혼합비율을 2.0이상으로 유지하여야 하는 것으로 나타났다. 또한, 90% 이상의 회수율을 얻기 위해서는 혼합액의 pH를 8.2이상으로 조절하여야 하는 것으로 나타났다. 합성반응을 통해 얻은 aluminum oxalate의 화학분석결과 $NH_4$ 14.5%, Al 7.18% 및 C 17.4%이었으며, 이의 화학식은 $(NH_4)_3Al(C_2O_4)_3$ $3H_2O$임을 확인할 수 있었다.

• Advances in environmental research
• /
• 제5권2호
• /
• pp.141-151
• /
• 2016

Large amounts of aluminum hydroxide ($Al(OH)_3$) exist in water purification sludge (WPS) because of the added aluminum coagulant in water treatment process. Notably, $Al(OH)_3$ is an amphoteric compound, can be dissolved in its basic condition using sodium hydroxide to form aluminate ions ($Al(OH)_4{^-}$). However, in a process in which pH is increasing, the humid acid can be dissolved easily from WPS and will inhibit the recovery and reuse of the dissolved aluminate ions. This study attempts to fix this problem by a novel approach to separate $Al(OH)_4{^-}$ ions using nanofiltration (NF) technology. Sludge impurity in a alkaline solution is retained by the NF membrane, such that the process recovers $Al(OH)_4{^-}$ ions, and significantly decreases the organic matter or heavy metal impurities in the permeate solution. The $Al(OH)_4{^-}$ ion is an alkaline substance. Experimental results confirm that a recovered coagulant of $Al(OH)_4{^-}$ ion can effectively remove kaolin particles from slightly acidic synthetic raw water.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.17-22
• /
• 2013

본 연구는 조류 개체 수 증가로 pH가 급격하게 상승한 원수가 정수장으로 유입될 때 pH 조정을 위해 사용하는 이산화탄소($CO_2$) 주입이 응집효율 및 용존 알루미늄 농도변화에 미치는 영향을 고찰하였다. 응집제 1 mg/L에 주입에 따른 pH 감소는 LAS -0.0384, PAC -0.0254, A-PAC -0.0201, PACS2 -0.0135로 나타났다. 용존 알루미늄 농도는 pH 7.44에서 0.02 mg/L, pH 7.96에서 0.07 mg/L, pH 8.16에서 0.12 mg/L, pH 8.38에서 0.39 mg/L로 응집공정의 pH 증가에 따라 용존 알루미늄 농도가 증가하는 것으로 나타났다. 여기서 주목할 점은 급속 교반 후 pH 8.0을 초과할 때부터 용존 알루미늄 농도는 급격하게 증가하는 것이다. 그러므로 높은 pH의 원수가 유입되는 정수장에서 알루미늄 농도가 먹는 물 수질 기준 만족하기 위해서는 응집공정의 pH가 7.8 이하로 유지되도록 공정관리가 필요하며, 원수 pH가 8.0 이상 유입되는 경우 이산화탄소($CO_2$) 주입으로 pH를 7.3 내외로 일정하게 유지할 수 있었다. 또한 이산화탄소($CO_2$) 주입으로 응집공정에서 pH를 조정함으로써 탁도 및 응집제 절감, 용존 알루미늄 농도 감소 효과를 확인할 수 있었다.

• 대한위생학회:학술대회논문집
• /
• 대한위생학회 2004년도 심포지움
• /
• pp.54-65
• /
• 2004

Use of aluminum salts as coagulants In water treatment may lead to increased concentrations of aluminum in finished water. Aluminum is a suspected causative agent of neurological disorders such as Alzheimer's disease. The objective of this study was to examine variation and minimizing in residual aluminum concentration during water treatment process. The aluminum sources at Bokjeong Water Plant were present naturally aluminum in the raw water and derived due to use of PACS as a coagulant. Much of the raw water total aluminum were in particulate and suspended aluminum. In this study was compared the optimize condition to minimize the concentration of residual aluminum using Jar-test with the various coagulants such as alum, PAC, PACS. The results indicated that PACS was more effective than alum, PAC and insufficient or excessive alum, PAC, PACS addition led to increase residual aluminum. Adjustment raw water pH $6.5\~7.0$ before coagulation using PACS was capable of minimizing total and dissolved aluminum. Thus it is important that the optimal dosage of coagulant and the optimal pH adjustment before coagulation can decided to minimize the concentration of residual aluminum in treated water.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.472-477
• /
• 2001

Spent catalysts containing platinum were generated in petroleum refinery and other chemical industries. The reclamation of precious metals from such wastes has long been attempted in view of their rare, expensive and indispensable nature. In this study, the recovery of platinum from petroleum catalysts was attempted by a method consisting mainly of dissolving alumina substrate with sulfuric acid thereby concentrating insoluble platinum. Also, platinum dissolved partially in sulfuric acid was recovered by a cementation method using aluminum metal as a reductive agent. The effect of temperature, time, concentration of sulfuric acid. and pulp density on the dissolution of substrate was investigated. When the substrate of platinum catalyst was ${\gamma}$-AI$_2$O$_3$ about 95% alumina was dissolved in 6.0M sulfuric acid at 10$0^{\circ}C$ for 2 hours. When the substrate was the mixture of ${\gamma}$-A1$_2$O$_3$and $\alpha$-A1$_2$O$_3$about 92% was dissolved after 4 hours. As a result, more than 99% of platinum could be recovered by this method and aluminum sulfate was obtained as byproduct.