• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.218-228
• /
• 2008

This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.199-204
• /
• 2017

Recently, the reagent in the laboratory can not only confirm the internal environment through the sensor but also check the status inside the reagent cabinet in real time. Also, if an abnormality occurs in the inside of the reagent cabinet, a serious accident may occur. To solve these problems, this paper proposes a reagent monitoring system that integrates reagent and ICT. The sensor data measured in real time is displayed to the user in real time through the monitor and stored in the database. In addition, by using the stored data, it is possible to inform the registered administrator in real time of the dangerous situation by informing the dangerous situation in case of danger, and to be able to check and control remotely. This can improve safety by making control and confirmation of the state of the inside of the reagent everywhere.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.284-288
• /
• 2016

Among the various physiological information that could be obtained from human body, heartbeat rate is a commonly used vital sign in the clinical milieu. Photoplethysography (PPG) sensor is incorporated into many wearable healthcare devices because of its advantages such as simplicity of hardware structure and low-cost. However, healthcare device employing PPG sensor has been issued in susceptibility of light and motion artifact. In this paper, to develop the real-time heart rate measurement device that is less sensitive to the external noises, we have fabricated an ultra-small wireless LC resonant pressure sensor by MEMS process. After performance evaluation in linearity and repeatability of the MEMS pressure sensor, heartbeat waveform and rate on radial artery were obtained by using resonant frequency-pressure conversion method. The measured data using the proposed heartbeat rate measurement system was validated by comparing it with the data of an commercialized heart rate measurement device. Result of the proposed device was agreed well to that of the commercialized device. The obtained real time heartbeat wave and rate were displayed on personal mobile system by bluetooth communication.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.27-31
• /
• 2007

In this paper, we present an efficient tiled stereo display system for tangible meeting. For tangible meeting, it is important to provide immersive display with high resolution image to cover up the field of view and provide to the local user the same environment as that of remote site. To achieve these, a high resolution image needs to be transmitted for reconstruction of remote world, and it should be displayed using a tiled display. However, it is hard to transmit high resolution image in real time due to the limit of network bandwidth, and so we receive multiple images and reconstruct a remote world with received images in advance. Then, we update only a specific area where remote user exists by receiving low resolution image in realtime. We synthesize the transmitted image to the existing environmental map of remote world and display it as a stereo image. For this, we developed a new system which supports GPU based real time warping and blending, automatic feature extraction using machine vision technique.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.948-950
• /
• 1999

In this paper, a monitoring system is desigend for a GPS/INS integration system. The function of the monitoring system is to acquire real-time data from system and displayed them. The monitoring system supervises the operation of navigation system. Visual C++ was used in the implementation. The performance of the monitoring system was verified through a real-time test for a GPS/INS Integration system which is composed of a GPS Receiver. IMU(Inertial Measurement Unit), NCU (Navigation Computer Unit)

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.51.2-51
• /
• 2001

A vehicle driving simulator is a virtual reality device which makes a human being feel as if the one drives a vehicle actually. The driving simulator is effectively used for studying interaction of a driver-vehicle and developing the vehicle system of new concepts. The driving simulator consists of a motion platform, a motion controller, a visual and audio system, a vehicle dynamic analysis system, a vehicle operation system and etc. The vehicle dynamic analysis system supervises overall operation of the simulator and also simulates dynamic motion of a multi-body vehicle model in real-time. In this paper, the main procedures to develop the driving simulator are classified by 4 parts. First, a vehicle motion platform and a motion controller, which generates realistic motion using a six degree of freedom Stewart platform driven hydraulically. Secondly, a visual system generates high fidelity visual scenes which are displayed on a screen ...

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.319-320
• /
• 1998

We have developed algorithm for calculating tumor dose from transmission dose in radiation therapy. Using data acquisition card and LabVIEW programming language, we acquired the signal from 9 ion chambers, processed and displayed it in real time. And we also developed GUI(Graphic User Interface) for system operation.

• Journal of Aerospace System Engineering
• /
• v.3 no.4
• /
• pp.35-40
• /
• 2009

The first purpose of this study is to develop a GCS(Ground Control System) by using RF(Radio Frequency) wireless communication equipments for UAV(Unmanned Aerial Vehicle). The second goal is to develop an antenna tracking system operating automatically. UAV receives flight data from a RF wireless system. So the role of antenna tracking system is very important to keep good communication state between UAV and GCS. GCS can check flight data and display a aviation state of UAV in real-time. The flight data displayed in real-time by GCS include the latitude, longitude, altitude, speed and so on. Experiments that measure a communication range and reliability are needed to develop a RF wireless communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.635-642
• /
• 2012

In this paper, a real-time control system with Wi-Fi wireless communication was developed for dentistry Integrated Device. The control system is developed based on the Android platform using S3C6410 ARM core that is equipped with Wi-Fi communication, RS-485, Linux 2.6 and Android 2.0. The control system controls a water purifier, compressor and suction in real-time. The experimental results that the control system was controlled by each control modules connected with a water purifier, compressor and suction. The status values are displayed in real-time using RS485.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.246-249
• /
• 2005

Satellite ground track display computer program is designed and implemented for the KOMPSAT-2 mission operations. Digitized world map and detailed Korean map is realized with zoom and pan capability. The program supports real-time ground trace and off-line satellite image planning on the world map. Satellite mission timeline is also displayed with the satellite ground track for the visualized mission operations. In this paper, the satellite ground track display is described in the aspect of the functional requirements, design, and implementation.