• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.166-168
• /
• 2009

We proposed a transflective liquid crystal display (LCD) with high aperture ratio using an electrophoretic particle layer (EPL). The transflective LCD consisted of the stacked LC layer and EPL which was acted as a switchable mirror under in-plane electrode structure. Without separation of reflective part and transmissive part in one pixel, a modeselectable display device can be obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.159-161
• /
• 2007

We fabricated flexible OTFT-backplanes for the electrophoretic display(EPD). The OTFTs employed bottom contact structure on PEN substrate and used the cross-linked polyvinylphenol for gate insulator, pentacene for active layer. Especially, we used PVA/Acryl double layers for passivation of backplane as well as for pixel dielectric layer between backplane and EPD panel. The OTFT-EPD panel worked successfully anddemonstrated to display some patterns.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.473-476
• /
• 2008

A simple voltage compensation pixel circuit for AMOLED is produced using low temperature polycrystalline silicon (LTPS) technology. Its operation is verified by AIM-SPICE. Simulation results show that the pixel circuit has high immunity to variation of LTPS-TFT and reduces the drop in luminance due to the degradation of the OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.692-695
• /
• 2008

Large area emissive displays have problems with nonuniform pixel characteristics and their individual ageing. A pixel integrated driver with pixel based optical feedback is presented to solve these problems. Photodetectors, optical feedback circuit and data handling capabilities are integrated in a high voltage CMOS technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.621-624
• /
• 2006

Pixel structure of the fringe-field switching (FFS) mode to improve transmittance has been studied. New FFS structures related to the electrode structure at the edges of pixel, and the pixel electrode width and distance between electrodes was optimized. The former improves transmittance by minimizing the region of disclination lines. The latter improves it by increasing light efficiency above center of electrodes and also response time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.842-845
• /
• 2006

We studied for high transmittance panel technology in the FFS mode. We found that fine slit of pixel electrode makes increase of panel transmittance, and at the same time this structure has an issue which is increasing operation voltage (Vop). We analyzed the reason of high Vop in the FFS pixel with fine slit using two-dimensional LC analyses. Finally we suggest the solution which has high transmittance with suitable operating voltage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.459-462
• /
• 2006

In this paper, we proposed a novel TFT-LCD pixel structure to compensate ${\Delta}V_p$, which is a maximum value of 1.82V in conventional pixel structure without compensation. We achieved a maximum value of 60mV in proposed pixel structure by integrating a dummy switch TFT in each pixel. The proposed TFT-LCD pixel structure with a remarkably reduced ${\Delta}V_p$ allows ultra high picture quality AMLCDs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.1-8
• /
• 2006

In this paper, we designed a pixel circuit for AMOLED display based on organic thin film transistors and analyzed the operation with SPICE simulation. First, we theoretically designed the pixel circuit with the result of layout for fabricating $32\times32$ AMOLED panel, TFT W/L and capacitance of storage capacitor. And we simulated the designed pixel circuit using HSPICE for analyzing electrical performance. As a result of simulation, we identified the possibility of AMOLED display based on OTFTs.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.62-70
• /
• 1997

In this paper, we presetn a new method to display 3-D image modelled as a sum of 2-D sliced images by expanding the concept of the conventional 2-D optical correlator based on spatial matched filtr to the 3-D region. It is hsown that a arbitrary image can be constructed by an array of the correlation-peaks between pixel-to-pixel and propose the systhesis precedure of 3-D spatial-matched-fjilter using fresnel diffraction equation to display 3-D image in space. It is also shown that the quantization problem is severe when the systehsised filter function is displayed on the conventional LC-SLM. To overcome this problem, anonlinear quantizaton method using the sigmoid function is suggested, and this method can reduce the bias and the loss of high spatial-frequency information, and improve the diffraction efficiency. Finally, the suggested method is tested by computer simulation and then approved by some optical experiments with the conventional LC-SLM.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.808-811
• /
• 2004

A full-color AMOLED display with an RGBW color filter pattern has been fabricated. Displays with this format require about $^1/_2$ the power of analogous RGB displays. RGBW and RGB 2.16inch diagonal displays with average power consumptions of 180 mW and 340 mW, respectively, are demonstrated for a set of standard digital still camera images at a luminance of 100 cd/$m^2$. In both cases, a white-emitting AMOLED is used as the light source. The higher efficiency of the RGBW format results because a large fraction of a typical image can be represented as white, and the white sub-pixel in an RGBW AMOLED display is highly efficient because of the absence of any color filter. RGBW and RGB AMOLED displays have the same color gamut and, aside from the power consumption difference, are indistinguishable.