• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.10-13
• /
• 2009

We have developed variety of LCD technologies for the out-door display, which improve out-door readability as well as reliability from external impacts. This improvement was made possible by new approach on LCD cell optical design and modification of LCD surface, which allows surrounding light to be transmitted to enhance the visibility and at the same time filtering out light, which are considered to be source of noise in terms of visibility. This technology enables users to maintain high display performance in both in-door & out-door environments moreover alternatively choosing in-door/out-door.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.146-151
• /
• 2021

We introduce an arbitrary waveform generation method and its H/W implementation case based on Rademacher and Walsh function. According to the orthogonal and periodic features of Rademacher and Walsh function, simple calculations can generate arbitrary waves with affordable logics. We implemented an FPGA-based AWS using above two functions, and verified. HDL simulation shows the proposed idea can draw desired analog test waveforms very fast, and its H/W size is promising to Built-Out Self-Test(BOST) logics for AI ICs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.484-487
• /
• 2005

In order to find out LC cell spacing method suitable for flexible cholesteric LCDs with high mechanical stability, we carried out bending and mechanical shock tests by using various spacing techniques: bead spacer, photo spacer, polymer wall with bead spacer and polymer wall with photo spacer. As a result, it was found that the spacing method using polymer wall incorporated with photo spacer is the best for flexible cholesteric LCDs in terms of mechanical stability. The investigation is discussed in detail.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.932-934
• /
• 2006

A relationship between discharge delay time and the aging method were investigated: A-Y (Address electrode - Scan electrode) aging and conventional X-Y(Common electrode - Scan electrode) aging with the variation of sustain voltage beyond self-erasing discharge. Although A-Y aging decreases discharge delay time, it has several drawbacks like non-uniformity of discharge, degradation of luminous efficiency and a color temperature. In a conventional aging condition which is carried out near the mid-margin voltage, discharge delay time is short in low voltage and high frequency condition. As an alternative to conventional voltage aging, high voltage aging is suggested which is carried out at self-erasing sustain voltage region. High voltage aging shows lower discharge delay time and fast aging speed than conventional voltage aging.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.837-840
• /
• 2008

This paper studies the current regulator of LED Backlighting system for LCD. The proposed regulator and a typical regulator are introduced. To find out the characteristics of two regulators, Prototype samples of LED Backlighting system are made. Both the proposed regulator and a typical regulator are compared with electrical, thermal and optical characteristics each viewpoint.

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.18-21
• /
• 2007

We developed a new configuration of polarized light out-coupling lightguide plate (LGP) in the LCD backlight. By collimating the light into the LGP, one linear polarization component experienced total internal reflection at the planar interface of LGP and anisotropic layer, whereas the orthogonal polarization was out-coupled along the normal direction through a birefringent layer and subsequent isotropic microstructures.

• Journal of Information Display
• /
• v.13 no.4
• /
• pp.159-166
• /
• 2012

In this paper, a display's emotional image quality can be primarily determined by designing the proper luminance level. Though displays with high luminance are preferred, too much light emission from a display may cause glare or visual fatigue to viewers. To find out the proper luminance level based on various video contents, this study was conducted with an OLED display with a real-black level and a wide color gamut, and with an LCD display with a high luminance level, to set the glare threshold under various conditions. The optimum luminance levels according to the display's loading ratio were found, and the maximum luminance that did not cause a glare in the test is proposed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.126-129
• /
• 2006

AC-plasma display panels were examined before and after the aging process to analyze the effect of the aging process. The gas analysis was done to detect the impurity gases out of the MgO film and phosphor by a residual gas analyzer. There were no differences found in the components. The MgO film was analyzed to find out the effect of an ion bombardment due to discharge. The surface roughness of the MgO film was different from regional groups due to the different degree of ion bombardments. XPS analysis showed that the 8 hour aging process was not sufficient to remove $Mg(OH)_2$ and $MgCO_3$ existed on the MgO surface. Photoluminescence measurement showed the small deterioration of blue and green phosphor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.451-456
• /
• 2005

This paper describes three kinds of experiments and analysis of their results related to human tactile sensitivity using an integrated tactile display system. The device can provide vibration, normal pressure and lateral slip/stretch which are important physical quantities to sense texture. We have tried to find out the efficient method of stimulating, limitation of surface discrimination by kinesthetic farce feedback and the effectiveness of the combination of kinesthetic force and tactile feedback. Seven kinds of different stimulating methods were carried out and they are single or combination of the kinesthetic force, normal static pressure, vibration, active/passive shear and moving wave. Both prototype specimen and stimulus using tactile display were provided to all examinees and they were allowed to answer the most similar sample. The experimental results show that static pressure is proper stimulus for the display of micro shape of the surface and vibrating stimulus is more effective for the display of fine surface. And the sensitivities of active touch and passive touch are compared. Since kinesthetic force feedback is appropriate to display shape and stiffness of an object, but roughness display has a limitation of resolution, the concurrent providing methods of kinesthetic and tactile feedback are applied to simulate physical properties during touching an object.

• Journal of the Korean Society of Costume
• /
• v.50 no.6
• /
• pp.177-188
• /
• 2000

In viewpoint of visual merchandising, display is recognized as important means of expressing fashion as well as essential factor of stimulating customers' interest in purchase. However, visual merchandising Is relatively new area and the number of specialized display personnels are limited Therefore, the purpose of this study was to investigate the practice of display in domestic fashion industry. For this study the display personnels working in 51 fashion brands were interviewed. The result was analyzed by using frequency count and percentage. It was found that few human resources were undertaking display work in various and abundant stores with relatively frequent display replacement. And main part of display work was performed outside office hours which brought out extension of working tome. Comparatively more budget assigned for ladies 'brand than mens' brand, youngsters 'than middle-ages' and obtaining display-related information was belong done mostly via domestic documentary sources and market researches. In general, optimistic attitudes were significantly shown by the interviewees that the importance of display is increasingly recognized, in the domestic fashion industry and therefore the prospect of display found to be expected as prosperous.