• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.103-112
• /
• 2013

After 1990s, the influence of construction industry has been decreased on national economy and construction business condition has been changed on economic recession and boom repeatedly. Larger fluctuation of business condition makes a forecast of it to be more difficult. Uncertainty in business prediction results in damages on construction companies and stakeholders. Therefore, study on forecasting a construction business is very important. This study suggests the Construction Industry Production Index(CIPI) to predict a construction business in consider of temperature effects. The results show that construction business is much influenced by temperature effects certainly and GDP. With the CBFM, this study examines CIPI for 2013 with two scenarios: 1)with GDP growth rate of 3.5% 2)with GDP growth rate of 2.4%. Thus, CIPI would be used as the economic state index to display the construction business conditions. Also, CIPI will be utilized as basic methodology in the impact of climate change in the construction industry.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.6
• /
• pp.754-762
• /
• 2012

Colbricon Superiore and Inferiore are two small adjacent high-mountain lakes located in the Paneveggio Natural Park (Italy) that offer the rare opportunity to study two iso-ecologic water environments differing only by area and volume in a ratio of 2:1 and 3:1, respectively. We took advantage of this setting to investigate phytoplankton dynamics, compare variability and productivity differences between the two basins, and assess size-dependent issues. The phytoplankton group of the Dinophyceae was chosen as the indicator organisms of ecological perturbation owing to their high sensitivity to environmental variations, as well as their acknowledged nature of versatile proxy to report global climatic changes. The study was conducted for over 10 years with fortnightly samplings. Results indicated that (a) the Dinophyceae communities in the smaller lake were significantly more resistant to changes exerted by the fluctuation of lakewater transparency and pH; and (b) the smaller lake sustained a consistently higher production with an average Dinophyceae density 1.73 fold higher than that of the larger lake. The coefficients of variation show that the chemical parameters in the smaller lake display higher time-related fluctuation while being spatially homogeneous and that such conditions correlate with a higher stability of the Dinophyceae assemblage. The use of this setting is also proposed as a model to test relationships between ecosystem production and physical stability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.120-128
• /
• 2018

OLED Display fabrication system is one of the most complicated discrete processing systems in the world. As the glass size grows from $550{\times}650mm$ to $1,500{\times}1,850mm$ in recent years, the efficiency of Automated Material Handling System (AMHS) has become very important and OLED glass manufacturers are trying to improve the overall efficiency of AMHS. Aiming to meet the demand for high efficiency of transportation, various kind of approaches have been applied for improving dispatching rules and facility layout, while simultaneously considering the system parameters such as glass cassettes due date, waiting time, and stocker buffer status. However, these works did not suggest the operational policy and conditions of distribution systems, especially for handling unnecessary material flows such as detour. Based on this motivation, in this paper, we proposed an efficient algorithm for improving detour transportation in OLED FAB. Specifically, we considered an OLED FAB simplifying OLED production environment in a Korean company, where four stockers are constructed for the delivery of Lot in a bay and linked to processing equipments. We developed a simulation model using Automod and performed a numerical experiment using real operational data to test the performance of three operation policies under considerations. We showed that a competitive policy for assigning alternative stocker in case of detour was superior to the current dedicated policy using a specified stocker and other considered policies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1071-1080
• /
• 2017

Recently, the terms of the 4th Industrial Revolution and the Smart Factory are often heard through news and media. But most of the companies that are parties are not interested. Because there is no specific guidance on how to build Smart Factory and information about Smart Factory. The built of the Smart Factory should be carried out in accordance with the size of the company considering the purpose of the introduction. In the existing study, they analyzed successful cases of building Smart Factory in Korea As a result, in the case of large-size firms, it is an effective strategy that expanding from a model factory to whole factory for successful Smart Factory building. In addition, in the case of medium and small-size firms, it is an effective strategy that upgrading from low-level step to high-level step for successful Smart Factory building. In this study, selecting medium and small-size firms, and bottleneck section and processes requiring improvement are identified through 3D virtual process design, and then install sensors. Finally, after analyzing the data collected through the sensor, we will improve the process and build Smart Factory with improved productivity.

• Journal of Radiation Protection and Research
• /
• v.42 no.3
• /
• pp.146-153
• /
• 2017

Background: Acute radiation syndrome (ARS) primarily refers to damage to the hematopoietic system, myeloid system, and gastrointestinal (GI) system caused by radiation exposure. Such damage progresses to become life-threatening. In particular, as the syndrome develops very rapidly-within several hours from radiation exposure-prompt and accurate diagnosis and treatment are needed, as is further research into appropriate diagnostic and treatment modalities. Materials and Methods: Minipigs, which display human-like properties, underwent whole-body irradiation at 2 or 4 Gy (doses causing hematopoietic ARS) or at higher doses of 7 or 12 Gy. Changes in the blood cells and clinical symptoms were analyzed and we performed a necropsy when the animals succumbed to ARS. Results and Discussion: The minipig irradiated with 2 Gy showed a decrease in white blood cells, including neutrophils, lymphocytes, and platelets in the early stages. However, the blood cell counts gradually increased and returned to normal values. The minipig irradiated with 4 Gy succumbed due to hematopoietic ARS. In contrast, the minipigs irradiated with 7 or 12 Gy exhibited clinical symptoms of combined GI damage and hematopoietic syndrome. Moreover, a characteristic pattern of platelet changes was observed in the 7 and 12 Gy irradiated minipigs. Conclusion: The changes in the platelet count caused by radiation exposure observed in minipigs, which are hematologically and pathohistologically similar to humans, suggest that they can be used as a novel diagnostic criterion.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1209-1217
• /
• 2016

This paper presents a novel charge pump scheme that combines the advantages of Fibonacci and Dickson charge pumps to obtain 30 V voltage for display driver integrated circuit application. This design only requires four external capacitors, which is suitable for a small-package application, such as smart card displays. High-amplitude (<6.6 V) clocks are produced to enhance the gate drive of a Dickson charge pump and improve the system's current drivability by using a voltage-doubler charge pump with a pulse skip regulator. This regulation engages many middle-voltage devices, and approximately 30% of chip size is saved. Further optimization of flying capacitors tends to decrease the total chip size by 2.1%. A precise and simple model for a one-stage Fibonacci charge pump with current load is also proposed for further efficiency optimization. In a practical design, its voltage error is within 0.12% for 1 mA of current load, and it maintains a 2.83% error even for 10 mA of current load. This charge pump is fabricated through a 0.11 μm 1.5 V/6 V/32 V process, and two regulators, namely, a pulse skip one and a linear one, are operated to maintain the output of the charge pump at 30 V. The performances of the two regulators in terms of ripple, efficiency, line regulation, and load regulation are investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.610-613
• /
• 2009

New rod-disc liquid crystal (LC) molecule RD12 (12 is the number of carbon atoms between the rod and disc mesogenic liquid crystals) was synthesized via the chemical attachment of six cyanobiphenly calamitic mesogens linked to the triphenyl discotic mesogen with six alkyl chain linkage. Aligning characteristics associated with homogenous alignment is investigated at first and then field-dependent molecular reorientation under a vertical electric field is studied. Interestingly, they show abnormal slow molecular transition from initiate state (no electric field condition) to certain voltage. In this condition, we observe the molecular competition during reorientation. However, once a tilting direction of disk molecules are defined, the frustration is not observed anymore. The origin of this phenomenon is explained with a suggested model for the first time.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.647-659
• /
• 2008

Colloids are a heterogeneous system in which particles of a few nanometers to hundreds micrometers in size are finely dispersed in liquid medium, but show homogeneous properties in macroscopic scale. They have attracted much attention not only as model systems of natural atomic and molecular self-assembled structures but also as novel structural materials of practical applications in a wide range of areas. In particular, recent advances in colloidal science have focused on nano-bio materials and devices which are essential for drug discovery and delivery, diagnostics and biomedical applications. In this review, first we introduce nano-bio colloidal systems and surface modification of colloidal particles which creates various functional groups. Then, various methods of fabrication of colloidal particles using holographic lithography, microfluidics and virus templates are discussed in detail. Finally, various applications of colloids in metal inks, three-dimensional photonic crystals and two-dimensional nanopatterns are also reviewed as representative potential applications.

• Convergence Security Journal
• /
• v.11 no.3
• /
• pp.55-66
• /
• 2011

This research focus on the value of smart phones for university students in Korea, considering on the correlations between the main causes influencing intrinsic value(price attributes, function attributes), network value(learning effects attributes, externalities attributes) user satisfaction, and intentions of repurchase of the smart phones market in Korea. Through the statistical analyses on the 8 hypotheses from a research model, we found that intrinsic value and network value gave an attentive influence on user satisfaction and repurchase intention. Call charge and Liquid crystal display and Design of smart phone have an influenced user satisfaction and repurchase intention.

• Journal of Digital Convergence
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2011

A mobile device is a handheld device, typically having a display screen with touch input and/or a miniature keyboard and accessible to the Internet. Because mobile devices are innovative and rapidly changing products, consumers are confronted with a decision-making problem to select the best device. This paper proposes an Analytic Hierarchy Process method to assess mobile devices and shows a method to select best mobile devices when purchasing. For this paper, the mobile devices considered as in the AHP model included net-book, tablet PC, smart phone, and camera phone. We derived 6 main criteria and 15 sub-criteria to synthesize the overall priority of criteria and mobile devices. The criterion of convenience in carrying showed the highest rank in the criteria. Although smart phones had the highest priority, the four mobile devices did not show significant differences in consumer preference.