• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.51-56
• /
• 2008

U-Health is abbreviated from ubiquitous Health. Its final aim is "to improve the quality of life. To realize it, it is needed to generalize IT infrastructure such as the development of information-technology and construction of network. It is guaranteed to get medical care benefits unconsciously every time and everywhere based on this system. In this study, the environment of unconscious measurement was set up through ultra-violet instead of the existing Probe to wear with finger to follow this. TFT-LCD was included into module for display. U-Healthcare focused on the minimization and portable characteristic through the designed Zigbee communication module. Handled healthcare device was developed based on the U-Healthcare.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.241-245
• /
• 2006

EEFL(External Electrode Fluorescent Lamp) for LCD displays are analyzed on electrical and optical characteristics by various electrode length. The electrodes of EEFL are coated at the outside of the glass tube. Brightness and efficiency of the EEFL are affected on lamp impedance characteristic. So, the experimental models are proposed for analysis and measurements of the brightness and efficiency of the lamps according to the electrode length. The sample of LCD backlight unit is used for these experiments, EEFL arrayed BLU of 32' for commercial TV display. The parameters of the experiments were quantised for simple result reading as the length of electrodes as 15, 23 and 30 mm. The inverter was designed and manufactured in the laboratory as the Full-Bridge switching inverter. The feature of the output were measured on voltages about 1000 - 1400V at the currents of 11 - 29 mA and the brightness $15,000\;cd/m^2-40,000\;cd/m^2$. The experiments have shown that the brightness are increased by increasing of the electrode lengths which have the lamp currents increased. But at an certain conditions, the brightness and efficiency were decreased because of unmatched between the inverter output and lamp impedance. The optimum applications of the EEFL BLU of 32' in this experiments have been shown to choose the parameters for driving frequencies of 100 kHz - 150 kHz, the brightness of $18,000-19,000\;cd/m^2$ and efficiencies of 40 - 45 lm/w.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.62-69
• /
• 2002

As Graphic Information is a intuitive, simple and definite media to transfer information to human, It is widely used and deserved as a information exchange and store media. But the graphic information is so abstract that a human may misunderstand that's real meaning. So In order to transfer a Exact information to a human, a additional picture and description is needed. So, in this paper, A authoring system is suggested that it can be able to give a additional information at each region in graphic information, and to structurize relations between each region and to give linking information between each region using XML Linking Notation. In this paper, An suggested authoring system is implemented to support a authoring facility which is to display graphical information of CGM(Computer Graphic Metafile) and BMP, and to define structural information by selecting each region of graphics image on screen directly, and to save that structural information and linking information with XML Linking notation, and to support a browsing facility which to find hot spot using a structurized graphic information and then to show a proper graph.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.411-417
• /
• 2018

This paper proposes and implements an on-line instruction manual system which can generate the instruction manual page for the target device at the smartphone on the spot. The instruction manual app. on smartphone scans a QR code or reads NFC tag attached in the instruction manual management module embedded in the target device, and receives instruction manual data from the instruction manual management module through the Bluetooth communications and finally shows the refined instruction manual pages on the smartphone display using a Web-based templates. For the evaluation we embedded the instruction manual management module for an industrial generator with its instruction manual data. Assuming a circumstance of blackout we show that the proposed system can reduce the repair work within two steps compared to three steps in the existing one without the proposed system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.225-232
• /
• 2009

Context-aware technologies for ubiquitous computing are necessary to study the representation of gathered context-information appropriately, the understanding of user's intention using context-information, and the offer of pertinent services for users. In this paper, we propose the WS-CAM(Web Services based Context-Aware Middleware) framework for context-aware computing. WS-CAM provides ample power of expression and inference mechanisms to various context-information using an ontology-based context model. We also consider that WS-CAM is the middleware-independent structure to adopt web services with characteristic of loosely coupling as a matter of communication of context-information. In this paper, we describe a scenario for lecture services based on the ubiquitous computing e e e e e e to verify the utilization of WS-CAM We also show an example of middleware-independent system expansion to display the merits of web-based services. WS-CAM for lecture services represented context-information itodomaits as OWL-based ontology model effectively, and we confirmed the information is inferred to high level context-information by user-defined rules. We also confirmed the context-information is transferred to application services middleware-independently using various web methods provided by web services.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.1
• /
• pp.41-51
• /
• 2007

This study was implemented to examine the effect of tobacco on operation of a retail store and propose a relevant direction to development of a retail store. In terms of an examination method, the questionnaire was conducted in respect of supermarkets and convenience stores(CVS) around the nation. As a result of analysis based on such questionnaire, although there was a little difference in between a supermarket and a convenience store, a similar result could be found in general. In other words, retailers selling tobacco regarded the tobacco as a medium to solicit customers. Since the significance of tobacco in terms of total sales volume was so high, without the tobacco, they might have suspend the business. Consequently, the effect of tobacco was enormous. In addition, under the premise that many regular customers should be acquired to develop such retail stores, it was found that it would be necessary to increase $15{\sim}20%$ in terms of a margin in tobacco, preserve the profit ratio by the government, make efforts to enhance a quality and design by a tobacco company, actively recommend a particular brand, and actively display a tobacco publicity booklet, etc. Moreover, the proper number of tobacco stores in comparison with habitual smokers was one per 200 persons. In respect of the most unreasonable tobacco policy, a minor-related system and a policy of increasing a tobacco price were named. Thus, under the premise that a medium such as tobacco is highly important with respect to an operation of retail store, it is necessary to pay a more careful attention to an improvement of a reasonable and equitable system to further develop a retail store.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.506-508
• /
• 2005

In general, organic TFTs are comprised of four components: gate electrode, gate dielectric, organic active semiconductor layer, and source and drain contacts. The TFT current, in turn, is typically determined by channel length and width, carrier field effect mobility, gate dielectric thickness and permittivity, contact resistance, and biasing conditions. More recently, a number of techniques and processes have been introduced to the fabrication of OTFT circuits and displays that aim specifically at reduced fabrication cost. These include microcontact printing for the patterning of metals and dielectrics, the use of photochemically patterned insulating and conducting films, and inkjet printing for the selective deposition of contacts and interconnect pattern. In the fabrication of organic TFTs, microcontact printing has been used to pattern gate electrodes, gate dielectrics, and source and drain contacts with sufficient yield to allow the fabrication of transistors. We were fabricated a pentacene OTFTs on flexible PEN film. Au/Cr was used for the gate electrode, parylene-c was deposited as the gate dielectric, and Au/Cr was chosen for the source and drain contacts; were all deposited by ion-beam sputtering and patterned by microcontact printing and lift-off process. Prior to the deposition of the organic active layer, the gate dielectric surface was treated with octadecyltrichlorosilane(OTS) from the vapor phase. To complete the device, pentacene was deposited by thermal evaporation and patterned using a parylene-c layer. The device was shown that the carrier field effect mobility, the threshold voltage, the subthreshold slope, and the on/off current ratio were improved.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.628-634
• /
• 2003

In existing internet, e-mail protocols including POP3 and IMAP4, provide e-mail services for exchanging messages with texts, hypertext and images as well. For the e-mail services in wireless mobile network, mobile e-mail service Providers have to install a mobile exclusive e-mail server or have to convert e-mail to mobile exclusive e-mail with wireless application format in case of POP3 protocol. In the e-mail service of IMAP4 case known as web-mail, It is difficult to view e-mail directly from server without IMAP4 mobile client because e-mail is stored in mail server side with remote file server. In either case, it also has the problems of viewing the e-mail of hypertext and image information at mobile, This Paper Provides e-mail extraction engine with image and hypertext conversion facilities that can be applied in wireless mobile internet and it is optimized In mobile communication environments such as a small display, small size of memory with web-mail protocol based on IMAP4 as well as POP3 mail protocol.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.609-615
• /
• 2013

As with any ships, adequate power provision is crucial, especially on the ocean navigating ships far from the land. In order to resolve the effective and economic power supply system of any ship in operation, in this paper, we propose a power management system that intelligently controls the power supply in ships. Power management systems in this design consist of a power load detection system, a generator configuration system, and a power monitoring system respectively. The CT / PT sensor is used to measure amount of current and power in the power detection system, and according to the collected information from various sensor, the generator configuration system will switch on and off the main / sub generator effectively. Finally, the power monitoring system will display all status information of this power management system at a glance for users. This power management systems implemented in this paper is evaluated via real-time experiments, which works well as designed, and certified by KSCIEC61892-1:2012 and KSCIEC60950-1:2008.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.592-599
• /
• 2007

The advancement of wireless technology improves the electronic learning by combining with the mobile function, and promotes the expanded transition to the mobile learning. Basically, the mobile learning provides the usefulness in terms of tile and space to provide learners with the access to the educational contents. However, the small display device and limited memory space of mobile device is limiting the access to the learning contents simply to the text-based transmission. This paper designed and implemented the multimedia mobile learning system that reduces the size of parser by define into MSMIL composed only of needed tag to multimedia contents production in the mobile devices by using the SMIL that supports the multimedia object synchronization reduces the data of multimedia learning data and enhances the transmission efficiency by applying the macro method in creating the contents of learning. The results of implementation indicates that it simplifies the designing language, makes the language learning easy, and saves the CPU resources for the parsing by reducing the size of parser.