• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.4
• /
• pp.150-157
• /
• 2008

This paper presents a design and implementation of realtime video player that operates on a tiled-display system consisting of multiple PCs to provide a very large and high resolution display. In the proposed system, the master process transmits a compressed video stream to multiple PCs using UDP multicast. All slaves(PC) receive the same video stream, decompress, clip their designated areas from the decompressed video frame, and display it to their displays while being synchronized with each other. A simple synchronization mechanism based on the H/W clock of each slave is proposed to avoid the skew between the tiles of the display, and a flow-control mechanism based on the bit-rate of the video stream and a pre-buffering scheme are proposed to prevent the jitter The proposed system is implemented with Microsoft DirectX filter technology in order to decouple the video/audio codec from the player.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2013

Objective: This study proposes the application of Ecological Interface Design(EID) method that is effective for situation awareness in digitalized environment. Background: While cognitive interface design method such as Information Rich Display(IRD) is simply focused on existing information for user, EID method helps users' resource to be solved to higher ion task such as diagnostic and problem solving. Method: Using EID method based on Work Domain Analysis (WDA), it was analyzed and designed for Steam Generator(SG) Water Level control process in a digitalized Main Control Room of Nuclear Power Plant. Proposed EID example is evaluated through interviews by expert & operator. Results: The result of expert & operator showed that EID display might give an aid for operator's decision. Conclusion: The results can reduce critical accidental damage that occurred due to cognitive load and so critical human error. Application: This study may be impact on situation awareness study for digitalized interface design.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.3
• /
• pp.257-261
• /
• 2009

In this study, we have researched the optimum design method of the lenticular lens sheet for 3D displays on a TFT-LCD panel, to offer a more stable stereoscopic image, improved 3D quality, and a wider viewing zone. Especially, we have defined the viewing zone width (a parameter denoted as Z) to apply it to the optimum design. The results of this new design method have been compared with the existing design method. As a result, it is revealed that the proposed design method improves the stereoscopic image quality by reducing the black matrix zone width.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.905-909
• /
• 2002

Characteristics of reflective LCDs, which have gained a lot of notice in recent years, rely largely on optical design of circular polarizers and the quarter-wave plates, as a component. Important design includes wavelength dispersion, viewing angle, uniformity of display and matching of refractive index. Our work has contributed to improving performance of reflective LCDs by enhancing the characteristics of polymer film using stretching and optical lamination technologies. To design that offers higher contrast and wider viewing angle, we have discovered that it is necessary to control viewing angle variation of the polarizing axis in order to compensate for the viewing angle of the polarizing film as well as the optical anisotropic properties of liquid crystal. Applying this technology to circular polarizers used for reflective LCDs enables design of wide viewing angle circular polarizers. In order to realize higher contrast for reflective LCDs, it is also necessary to design other optical materials including polarizing films. For design of hybrid optical film, it is particularly necessary to reduce surface reflection and interface reflection. This paper also reports our findings concerning this topic.

• Laser Solutions
• /
• v.17 no.1
• /
• pp.17-21
• /
• 2014

Head up display is in increasing demand for advanced devices in the modern luxury vehicles. It helps drivers focus on driving environment on the road. While HUD technology with LED has advanced, the brightness in daylight can be still an issue to be resolved. Laser light source is a possible solution to overcome the brightness problem and optimal optics design is required for the best performance. Sample design of optics is proposed and detail procedure of lens design evaluation is presented in this paper. The results were characterized by using a ray tracing method and qualitative analysis for spot and DEE is also presented. The overall error or image distortion remained in the target range of $25{\mu}m$ and the simulated image demonstrated possible use in the automotive applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.11-12
• /
• 2000

An 18.1" Thin Film Transistor Liquid Crystal Display (TFT LCD) monitor adopting high brightness In Plane Switching (IPS) technology was realized. While conventional IPS structure used a Chromium (Cr) and Molybdenum (Mo) for a drain electrode, Indium Tin Oxide (ITO) was proposed and verified in this paper. Black sticky micropeal spacers were introduced for the reduction of light scattering phenomena, which was observed at dark room with the conventional micropeal spacers. With the proposed method, more than 10 % aperture ratio was increased and the excellent image quality was obtained.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.4
• /
• pp.349-356
• /
• 2014

As the turns ratio of the tapped-inductor contributes to the step-up ratio, the tapped-inductor boost (TIB) converter has significantly increased level of difficulties in its analysis and design compared to the conventional boost converter where the duty ratio is the sole factor affecting the step-up ratio. In this paper, the operation of the continuous current mode TIB converter is briefly reviewed, the characteristics are analyzed in detail, and a design guideline optimizing the loss in the tapped-inductor is presented with a practical design example. Finally, experimental results from a 12V/120V prototype for 0.25A LED driver application are also presented to confirm the design.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.163-167
• /
• 2022

In this paper, an optimization design method of a diffuser using Bernoulli's theorem was reviewed. The aspect ratio of the cylindrical diffuser chamber and the diameter ratio of the air inlet and outlet were used as design parameters. For the optimal design of the cylindrical diffuser chamber, the air flow inside the chamber was simulated using ANSYS while changing the aspect ratio of the chamber. In order to confirm the simulation results, the diffuser manufactured using the laser processing machine was measured. Through ANSYS simulation and measurement, it was found that the optimal design condition was when the aspect ratio (chamber height/radius) of the diffuser chamber was 1/2 and the diameter ratio of the air inlet and outlet was also 1/2.

• Korean Journal of Human Ecology
• /
• v.12 no.5
• /
• pp.755-766
• /
• 2003

The surrealism for the revelation of the unconscious realms shares the inner world of mentality with modern fashion display for the visual expression of sensation each other. The analysis of the influence which automatism technique of surrealism exerts on fashion display showed as follows : 1) The automatism technique elevated the dramatic effect of the sales room by scraping the perspective, or the principle of visual arts. 2) It maximized the effect of subject of the display by coinciding surrealism with realism. 3) The technique which distorts the things heralded the strong message to customers by letting them keep away from the fixed idea. 4) Humorous expression of display brought about the effect of sales stimulation by giving astonishment, shock and exaggeration. 5) Expression of surrealism and realism caused customers to feel shock, illusion, fantasy. 6) The automatism technique expressed the high-tech image, and free expression by revealing the diversity of subject. 7) Display hinted from nature satisfied the mental desire of the human beings to be assimilated with nature. The formative characteristic presented the new possibility of combination of display with arts through the avant-garde sensation. Sale's room, or the marketing space was to be sublimated to three dimensional art space, which enhanced the image of sale's room, furthermore meeting the demand of moderner's lifestyle.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.691-698
• /
• 2004

In viewpoint of visual merchandising, display is recognized as important means of expressing fashion as well as essential factor of stimulating customers' interest in purchase. However, visual merchandising is relatively new area and the studies on specialized display personnels are limited. Therefore, the purpose of this study was to investigate the status and educational background of displayers in domestic fashion industry. For this study, 72 display personnels working in 51 fashion brands were interviewed. As results, it was found that most of displayers were consisted of single women in the late twenties. And the main part of display work was performed outside office hours which brought out extension of working time. The displayers had relatively high educational background graduated mostly from the majors related to display such as clothing and applied arts. However, it was noted that new curriculum of these majors needs to be developed in order to provide the courses with more on-hand practices. In general, optimistic attitudes were significantly shown by the interviewees that the importance of display is increasingly recognized in the domestic fashion industry and therefore the prospect of display found to be expected as prosperous.