• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.97-103
• /
• 2007

A novel selective metallization process to fabricate the fine conductive line based on inkjet printing has been investigated. Recently, Inkjet printing has been widely used in flat panel display, electronic circuits, biochips and bioMEMS because direct inkjet printing is an alternative and cost-effective technology for patterning and fabricating objects directly from design without masks. The photosensitive etching resist used in this process is an organic polymer which becomes solidified when exposed to ultraviolet lights and has high viscosity at ambient temperature. A piezoelectric-driven inkjet printhead is used to dispense 20-30 ${\mu}m$ diameter droplets onto the copper substrate to prevent subsequent etching. Repeatability of circuitry fabrication is closely related to the formation of steady droplets, adhesion between etching resist and copper substrate. Therefore, the ability to form small and stable droplets and surface topography of the copper surface and chemical attack must be taken into consideration for fine and precise patterns. In this study, factors affecting the pattern formation such as adhesion strength, etching mechanism, UV curing have been investigated. As a result, microscale copper patterns with tens of urn high have been fabricated.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.640-647
• /
• 2012

Current electronic products are dominated by the laser processing and the application will be extended this time. Especially, demands for high precision laser processing with a large area has been increasing for a number of applications such as in solar cell battery, display parts, electronic component and automobile industry. In this paper we designed an on-the-fly system for ultrafast/high precision/large area laser processing. In addition, we have developed the path algorithm for large area. Expansion of the area in which laser processing is an important factor to handle the ultrafast/wide area processing, it will require a processing path. Processing path is path of 2- axis stage and stage of change in velocity can be smooth as possible. We proposed a path of the user concept using NURBS(Non-Uniform Rational B-Spline)method. Through our experiment with the chopper, was to prove the continuity of edge parts. Through basic shape experiments, we proved that large area can be processed using laser. We developed a simulation tool using Visual C++.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.3-10
• /
• 1993

This study intends to provide a beneficial foundation which can aid our understanding of how a clothing consumer group can be classified according to the clothing buying motives, and what differences are there about the importances store image attribute among them and how consumer's preferences to the store image are shown differently among them and ultimately, some concrete data which can be useful in establishing efficient store image strategies for clothing stores. 484 subjects were gathered through convenience sampling method and, for data analysis, cronbach' ${\alpha}$, frequency, percentage, mean, ${\chi}^2$-text, t-test, ANOVA, Duncan Multiple Range Test, Factor Analysis, Cluster Analysis were conducted. the results are as follows; 1. three kind of factors in the clothing buying motives were determined for analysis of consumers group and by which it was revealed as to be significant for us to classify them three subdivisions; those of fashion pursuit group, self display group, financial utilitarian group. 2. Importance on store image attribute was revealed that Ewha students regarded quality, price, more important factors than others. 3. Store image preferences show significantly when concerned with quality, price, fashion, impression and age of store personnel, convenience for exchanging and returning goods, credit, delivery and repair, mailing of catalogue and discount coupon, bightness of store among consumer groups.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.359-367
• /
• 2011

A suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. The research on pan-sharpening algorithm in improving the accuracy of image classification has been reported. For a classification, preserving the spectral information is important. Other applications such as road detection depend on a sharp and detailed display of the scene. Various criteria applied to scenes with different characteristics should be used to compare the pan-sharpening methods. The pan-sharpening methods in our research comprise rather common techniques like Brovey, IHS(Intensity Hue Saturation) transform, and PCA(Principal Component Analysis), and more complex approaches, including wavelet transformation. The extraction of matching pairs was performed through SIFT descriptor and Canny edge detector. The experiments showed that pan-sharpening techniques for spatial enhancement were effective for extracting point and linear features. As a result of the validation it clearly emphasized that a suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. In future it is necessary to design hybrid pan-sharpening for the updating of features and land-use class of a map.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.657-661
• /
• 2008

Recently, products of electronic industry and related parts are required to have the thickness thinner and thinner to reduce the part weight. To go with this trend, LGP(light guide plate) of LCD-BLU(Liquid Crystal Display-Back Light Unit: It is one of kernel parts of LCD) for cell phone has the thickness of ${\sim}0.3mm$ and the battery case of cell phone has ${\sim}0.25mm$. Accordingly, high speed injection molding is required to mold products which have thinner parts. To achieve high speed injection and proper control of hydraulic unit, various design was applied to conventional injection unit. In the present paper, we concentrated on the molding stability of hydro-mechanical high speed injection machine to make an LGP of 0.3mm thickness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3121-3135
• /
• 2015

Owing to the increase in consumption of multimedia content and the improvement of device capacity, user demand for high-quality content has increased. However, it is difficult to transport such large amounts of content over the existing broadcasting network with limited bandwidth. To provide high-definition broadcasting, some studies suggest methods of transporting multimedia over heterogeneous networks after encoding content hierarchically. MPEG Media Transport (MMT), standardized by Moving Picture Experts Group (MPEG), is a solution that enables large-volume media transport over heterogeneous networks such as digital broadcasting networks and packet-switched networks. In the case of delivering a scalable encoded video over different networks, synchronization of each stream is an important issue. MMT defines a synchronization scheme, but does not contain sufficient functions to implement it. In this paper, we propose a synchronization scheme for media streams that are encoded hierarchically, divided into layers, and transported over heterogeneous networks. We implement our scheme using MMT and HTTP, and experimented using three encapsulated video streams with different durations. As a result, we show that the proposed scheme can reduce the waiting time to display high-quality video, relative to Dynamic Adaptive Streaming over HTTP-Scalable Video Coding (DASH-SVC) by requesting segments of enhanced layers after calculating the transmission time. Additionally, we find out that the selection of durations have a relation to the characteristics of the video.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.157-159
• /
• 2002

웹 Annotation은 개인 노트의 수단이며, 동료들 사이에서 의견 교환과 협업할 수 있도록 도와준다[l]. 또한, Annotation들은 데이터베이스, 문서, 그리고 분산된 환경에서 중요한 일이나 사건을 기록하는데 바람직하다[2]. 이런 Annotation들은 통신수단의 발달과 함께 증가한 인터넷 사용자들의 활발한 의견교환을 통해 빠르게 증가하고 있다. 때문에 사용자들은 많은 Annotation들 중 적절한 Annotation을 선택하기가 쉽지 않다. 현재, 웹 상에서의 Annotation에 관련된 연구들이 활발히 진행 중에 있다. 그러나 한 문서 또는 한 Anchor에 존재하는 많은 Annotation들을 효과적으로 제공하는 방법에 관한 연구는 미비한 실정이다. 기존의 대부분의 Annotation System들은 다수의 Annotation들을 관련성이나, 사용자 특성을 고려하지 않고, 입력된 무의미한 순서로 제공하며 생성된 anchor와 Annotation들을 모두 보여준다. 이로 인해, 한 문서에 너무 많은 Annotation이 생성되어 문서의 레이아웃을 손상시킬 수 있으며[3], anchor와 문서의 이해 시간을 가중시킨다[4]. 따라서 본 논문에서는 웹 문서에 생성된 다수의 Anchor들과 Annotation들을 좀 더 효율적으로 제공하기 위해 협업 환경에서 효과적인 Social Filtering[5]을 적용하여 적절한 Anchor와 Annotation만을 제공하는 사용자 관심사에 의한 Annotation 처리 기법을 제안한다. 더불어 한 Anchor에 생성된 Annotation들에 순위를 부여하여 보다 적절한 Annotation을 먼저 접근할 수 있는 Anchor에 대한 적절한 Annotation내에서의 순위부여 기법을 제안한다.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.16-31
• /
• 2016

This study analyzed cases that applied hologram technology in the fashion industry in order to provide basic information for research on fashion marketing using hologram technology. The results of this study are as follows. A hologram was applied to fashion businesses in various ways including fashion shows, outdoor signboards, hologram windows or screens in stores, and launching shows or exhibitions. Most of these cases were foreign fashion brands, which utilized hologram technology actively for formulating a new brand image or for advertising products. Among Korean brands, however, there are not many cases of hologram application. Today, as-being the age of smart devices, the mobile advertisement market is growing rapidly among smart phone users. DKNY and Puma are providing information on styling through smart phone applications, and the Adidas stores in Germany also allow the customers to buy goods by entering a simple code through the smart phone. Recently, new devices are being introduced one by one, which display 2D digital contents in 3D holograms by combining mobile and hologram technologies. The marketing of fashion products is not just for supplying products but is required to satisfy the consumers' five senses. Therefore, the development of experiential contents based on the combination of mobile and hologram technologies will open new potential for profitable business models.

• Journal of the Korean Home Economics Association
• /
• v.43 no.3 s.205
• /
• pp.131-145
• /
• 2005

The purpose of the study was to determine ae forms, patterns and structures of Huipils as traditional clothes in Guatemala and Mexico, and to cite possibilities of applying the findings of the study, acquired by comparing the differences of the two countries' Huipils, to textile or costume design. There are two types of Huipils. One is for everyday wear and another one is for special occasion. The latter is bigger in size, more colorful and is worn on top of the daily use Huipil. Huipils consist of 1 to 3 panels, and are usually made by weaving rectangular cloth which has 4 selvedges. There are various neckline such as - type, T type, 1 type, round type and square type. The types of the neckline depends on how many panels are used. The Mexican Huipils are worn usually over skirts, whereas the Huipils of Guatemalans are practically designed with white cotton that doesn't have any patterns so as to be easily put into skirts. Different from Mexicans' Huipils which mainly show big botanical patterns, the patterns of Guatemalans' Huipils combine animals, plants and abstract concepts display mixed aspects, and it seems to me that that expressed their emotions and dearest wishes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.272-275
• /
• 2005

The high stability of a-Si:H TFTs device is studied with different deposited conditions of $SiN_x$ films by PECVD. The process parameters of $N_2$, $NH_3$ gas flow rate, RF power, and pressure s of hydrogenated amorphous silicon nitride are taken into account and analyzed by Taguchi experimental design method. The $NH_3$ gas flow rate and RF power are two major factors on the average threshold voltage and the a-SiNx:H film's structure. The hydrogen contents in $SiN_x$ films were measured by FTIR using the related Si-H/N-H bonds ratio in $a-SiN_x:H$ films. After the 330,000 sec gate bias stress is applied, the threshold voltages ($V_th$) shift less than 10%. This result indicates that the highly stable a-Si:H TFTs device can be fabricated with optimum gate $SiN_x$ insulator.