• Title/Summary/Keyword: Dispersion analysis

Search Result 1,421, Processing Time 0.033 seconds

Risk Assessment of Compressor Room for Next Generation LNG Carriers (차세대 LNG선 컴프레서룸의 위험성 해석)

  • Moon, Ki-Ho;Song, Seok-Lyong;Jeong, Sam-Heon;Ha, Jong-Phil
    • Special Issue of the Society of Naval Architects of Korea
    • /
    • 2008.09a
    • /
    • pp.76-83
    • /
    • 2008
  • New and more efficient propulsion systems are required for LNG carriers. One of the proposed systems is a combination of a gas turbine with a heat recovery steam generator. This system constitutes a novel approach, which needs to be analyzed by system analysis and risk assessment to compensate for the lack of field experience. Of specific concern is the high pressure fuel supply system. This paper describes the dispersion and fire analysis performed to identify for safety and design improvement of proposed system.

  • PDF

Analysis of Stopband Characteristics for 1D Photonic Band-Gap Structures (1D PBG 구조의 저지대역 특성 분석)

  • 신윤미;이지면;이범선
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.2
    • /
    • pp.136-145
    • /
    • 2002
  • In this paper, we facilitate the analysis of 1D PBG structure using a ABCD matrix formulation after converting field parameters into circuit parameters. Dispersion diagrams for an infinite 1D PBG structure are derived and compared with the frequency responses for a finite structure (N=10). When the proposed method is adopted, the analysis and synthesis of 1D PBG structures become very convenient.

Dynamic discrmination of sensory evaluation capability using a paired-comparison method (일대비교에 의한 관능평가능력의 동작판별)

  • 김정만;이상도
    • Journal of the Ergonomics Society of Korea
    • /
    • v.12 no.2
    • /
    • pp.85-91
    • /
    • 1993
  • Data obtained for sensory evaluation have a wide dispersion and fuzziness since human sensory organs are used as a means of measuring sensation instead of measuring instruments. Such dispersion and fuzziness are caused by all kinds of time error and have a great influence on the sensory evaluation, but most of previous papers not consider time errors. In this study, the comparative judgement capability of the evaluator was discriminated by means of the eigen- structure analysis on the premise that evaluation values of sensory evaluators obtained by a paired-comparison become different by the order of sample presentation.

  • PDF

DISPERSION RELATION OF LONGITUDINAL CARRIER WAVES IN SOLIDS BY COUPLED MODE ANALYSIS

  • 강창언
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.14 no.2
    • /
    • pp.28-31
    • /
    • 1977
  • Normal modes of carrier waves due to longitudinal modulation in solids have been defined. The dispersion relationship of these waves in the presence of collision effects and thermal diffusion is derived and examined in detail. It is also shown that the carrier waves are reduced to the wellknown space-charge waves and electroacoustic hayes in special cases.

  • PDF

Dynamic discrmination of sensory evaluation capability using paired-comparison method (1대비교에 의한 관능평가능력의 동적판별)

  • 김정만;이상도
    • Proceedings of the ESK Conference
    • /
    • 1993.10a
    • /
    • pp.113-123
    • /
    • 1993
  • In a sensory evaluation, the data obtained by a result of evaluation have a wide dispersion and fuzziness because human sense organ is used as a means of measuring sensation instead of measuring instruments. These dispersion and fuzziness are caused by all kinds of time error and have a great influence on a sensory evaluation, but most of previous papers don't deal with these time errors. In this study, a comparative judgement capacity of an evaluator is discriminated by means of the eigen-structure analysis on the premise that evaluation value of sensory evaluators obtained by a paired-comparison become different by the order of sample presentation

  • PDF

Analysis of Radiation Exposure from Nuclear Reactor Accident in Complex Terrain (산악지형에서의 원자력발전소 사고시의 피폭해석)

  • Moon Hee Han;Sung Ki Chae;Moon Hyun Chun
    • Nuclear Engineering and Technology
    • /
    • v.17 no.3
    • /
    • pp.216-223
    • /
    • 1985
  • The Gaussian plume model is widely used to calculate the concentrations of gaseous radioactive effluents in the atmosphere. This model assumes that the terrain is flat, so that the dispersion coefficients which are the most important parameters in this model must be compensated in complex terrain such as in Korea. In this study the compensation of vertical dispersion coefficient in two dimensional x-z plane has been accomplished by comparing the Gaussian plume model with numerical model. The results show that the concentractions of radioactive effluents over complex terrain are more dilluted than those expected over flat terrain.

  • PDF

Dispersion stability of ultra-fine $BaTiO_3$ suspensions in aqueous medium

  • Chun, M.P.;Chung, Y.B.;Ma, Y.J.;Cho, J.H.;Kim, B.I.
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.15 no.6
    • /
    • pp.239-243
    • /
    • 2005
  • The effect of pH and particle size on the dispersion stability of ultra-fine $BaTiO_3$ suspensions in aqueous medium have been investigated by means of zeta potential, sediment experiments, and powder properties (particle analysis, specific surface area) etc. Zeta potential as a function of pH for two particles of different size increases from -75 to +10 mV with decreasing pH from 8.5 to 1.4. The curve of zeta potential for small particle (150 nm) has slow slope than that of large particle (900nm), giving IEP (isoelectric point) value of pH=1.6 for small particle and pH=1.9 for large particle respectively, which means that it is more difficult to control zeta potential with pH fur small particle than large particle. The dispersion stability of $BaTiO_3$ particles in aqueous medium was found to be strongly related with the agglomeration of colloidal suspensions with time through the sedimentation behaviors of colloidal particles with time and pH value.

Analysis of Salinity Dispersion in Estuaries by an X-Z Numerical Model (X-Z 수치모형에 의한 하구의 연도확산 분석)

  • 강주환;이길성
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.3 no.4
    • /
    • pp.185-196
    • /
    • 1991
  • A laterally-averaged X-Z numerical model with transformed coordinates is developed to analyze the salinity dispersion in estuaries. Gravitational term, salinity variations with respect to the water depth. and re-evaluation of , salinity boundary condition are examined. Especially. the improvements in stability and accuracy of the numerical algorithm are made by adopting the fractional step method for the dispersion term of the governing equation. The model being applied to the Keum River Esturary, physical and numerical properties of Manning's n and dispersion coefficients are analyzed. Salinity intrusion into the river, influence of upstream river inflows, and salinity distribution for spring/neap tide are also examined.

  • PDF

AGN gas outflows out to z ~ 0.2

  • Woo, Jong-Hak;Son, Donghoon;Bae, Hyun-Jin
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.40 no.1
    • /
    • pp.42.3-43
    • /
    • 2015
  • Using a large sample of 32,000 type 2 AGNs out to z = 0.2, we present the statistical results on the ionized gas outflows, based on the analysis of the velocity shift of narrow emission lines with respect to the systemic velocity measured from the stellar absorption lines. Considering the projection effect, the fraction of type 2 AGNs with the [O III] velocity offset, which is ~50%, is comparable to that of type 1 AGNs. The velocity dispersion of [OIII] is typically larger than that of Ha, suggesting that outflow is prevalent in type 2 AGNs. A weak correlation of the OIII luminosity with velocity shift and velocity dispersion indicates that outflow velocity is stronger for higher luminosity AGNs. Based on our 3-D biconical outflow models with simple assumptions on the velocity structure, we simulate the projected 2-D velocity and velocity dispersion maps, which are spatially integrated to reproduce the measurements of SDSS AGNs. By comparing the distribution of the measured velocity and velocity dispersion of OIII, with the model grids, we constrain the intrinsic outflow velocities. The outflow velocity ranges from a few hundreds to a thousand km/s, implying a strong feedback to ISM.

  • PDF

Fabrication of Oxygen Sensitive Particles and Characteristic Analysis (산소감응성 입자 제조 및 특성 분석 연구)

  • Jeong, Won-Taek;Yi, Seung-Jae;Kim, Hyun-Dong;Kim, Kyung-Chun
    • Journal of the Korean Society of Visualization
    • /
    • v.9 no.4
    • /
    • pp.41-46
    • /
    • 2011
  • Oxygen sensitive functional particles(OSParticle) were fabricated by three different methods for using the particles as oxygen sensors and PIV tracers. The used methods were a physical coating method, an ion-exchange method and a dispersion polymerization method. The physical coating method is dipping $SiO_2$ hollow particles into dye solution then drying. This method is very simple, but particles are not uniform in diameter and luminescence. The particles fabricated by the ion-exchange method have very uniform diameter and well doped. However, it can not be used in water since the particles are hydrophobic. In case of the dispersion polymerization method, the diameter of OSParticles is quite uniform. The diameter of OSParticles can be changed by controlling the quantity of AIBN (2,2'-azobis isobutyronitrile). For the purpose of dissolved oxygen concentration measurement in micro scale water flows, the dispersion polymerized OSParticles turn out to be the most superior functional particles. The luminescent intensity of OSParticles was tested with the variation of dissolved oxygen concentration in water samples. As a result, the luminescent intensity of OSParticles is monotonically decreased with increasing DO (Dissolved oxygen) concentration of water.