• Land and Housing Review
• /
• v.13 no.1
• /
• pp.141-150
• /
• 2022

Responding to the increasing demand for research on seismic resistance of structures triggered by a large-scale earthquake in Korea, the Ministry of the Interior and Safety revised the typical application of the existing seismic design standards with the national seismic performance target enhanced. Therefore, in this paper, the dam body of the aged Test-Bed and the penstock with fluid were modeled by the three-dimensional finite element method by introducing several variables. The current seismic design standard law confirmed the safety of the dam structure and penstock against seismic waves. As a result of the 3D finite element analysis, the stress change due to the water impact of the penstock was minimal, and it was confirmed that the effect of the hydraulic pressure was more significant than the water impact in the earthquake situation. When the hydrostatic pressure is in the form of SPH, it was analyzed that the motion of the fluid and the location of stress caused by the earthquake can be effectively represented, and it will be easier to analyze the weak part. As a result of the analysis, which considers penstock's corrosion, the degree of stress dispersion gets smaller because the penstock is embedded in the body. The stress result is minimal, less than 1% of the yield stress of the steel. In addition, although there is a possibility of micro-tensile cracks occurring in the inlet of the dam, it has not been shown to have a significant effect on the stress increa.

• Journal of the Korean Regional Science Association
• /
• v.39 no.3
• /
• pp.3-12
• /
• 2023

The issue to be discussed is set as the relationship between urban fragmentation and urban heat phenomena. The fragmentation is recognized as a negative form that commonly occurs in the process of urbanization. The purpose of this study is to examine the relationship between urbanization entropy and heat phenomenon by looking at the five major cities in Korea. The employed methods are InVEST Urban Cooling Model and MSPA (Morphological Spatial Pattern Analysis) by using the meteological data for the July 2018. The major results are as follows; First, a low rank correlation(rho=-0.3) is found in the relation between entropy and Cooling Capacity Index (CCi). Second, a very high level of rank correlation is observed between entropy and Average Temperature(℃)(rho=0.9). The implications are that 1) a city with a large degree of sprawling development can have a negative effect on urban heat phenomena; 2) the composition of land use including dispersion and concentration in non-urbanized areas, which has the characteristics of open space, can affect the urban thermal environment. Due to the limited number of case studies, it is appropriate to understand that a possibility, not generalization, is observed between entropy and heat phenomena in urbanized areas.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.167-176
• /
• 2011

This study's purpose is to analyse factors of determination about detouring for makinga standard model in regard of unfavorableness and uncertainty when unspecified individual recipients make a decision at the time of course detour. In order to achieve this, we surveyed SP investigation whether making a detour or not for drivers as a target who take a high way and National highway. Based on this result, we analysed detour determination factors of drivers, establishing a combination model of Decision Tree and Neural Network model. The result demonstrates the effected factors on drivers' detour determination are in ordering of the recognition of alternative routevs, reliable and frequency of using traffic information, frequency of transition routes and age. Moreover, from the outcome in comparison with an existing model and prediction through undistributed data, the rate of combination model 8.7% illustrates the most predictable way in contrast with logit model 12.8%, and Individual Model of Decision Tree 13.8% which are existed. This reveals that the analysis of drivers' detour determination factors is valid to apply. Hence, overall study considers as a practical foundation to make effective detour strategies for increasing the utility of route networking and dispersion in the volume of traffic from now on.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.27-34
• /
• 2013

This paper deals with the performance anlysis of CCA adaptive equalization algorithm, that is used for reduction of intersymbol interference at the receiving side which occurs in the time dispersive communication channel. Basically, this algorithm is borned for the solving phase unrecovery problem in the CMA equalizer, and the comines the concept of DDA (Decision Directed Algorithm) and RCA (Reduce Constellation Algorithm). The DDA has a stable convergence characteristics in unilevel signal, but not in the number of levels in multilevel signal such as QAM, so it has unstable problem. The RCA does not provide reliable initial convergence. And even after convergence, the equalization noise due to the steady state misadjustment exhibited by it is very high as compared to DDA. For the solving the abovemensioned point, the CCA adaptive eualization alogorithm has borned. In order to performance analysis of CCA algorithm, the recovered signal constellation that is the output of the equalizer, the convergence characteristic by the residual isi and MD (maximum distortion), the SER characteristic are used by computer simulation and it was compared with the DDA, RCA respectively. As a result of simulation, the DDA has superior performance than other algoithm, but it has a convergence unguarantee and unstability in the multilevel signal. In order to solving this problem, the CCA has more good performance than RCA in every performance index.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.612-620
• /
• 2016

Aqueous mineral carbonation process, in which $CO_2$ is captured through the reaction with aqueous calcium oxide (CaO) solution, is one of CCU technology enabling the stable sequestration of $CO_2$ as well as economic value creation from its products. In order to enhance the carbon capture efficiency, it is required to maximize the dissolution rate of solid reactants, CaO. For this purpose, the proper design of a reactor, which can achieve the uniform distribution of solid reactants throughout the whole reactor, is essential. In this paper, the effect of internal reactor designs on the solid dispersion quality is studied by using CFD (computational fluid dynamics) techniques for the pilot-scale reactor which can handle 40 ton of $CO_2$ per day. Various combination cases consisting of different internal design variables, such as types, numbers, diameters, clearances and speed of impellers and length and width of baffles are analyzed for the stirred tank reactor with a fixed tank geometry. By conducting sensitivity analysis, we could distinguish critical variables and their impacts on solid distribution. At the same time, the reactor design which can produce solid distribution profile with a standard deviation value of 0.001 is proposed.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.215-225
• /
• 2015

Recently, the importance of energy saving and alternative energy is significantly increasing due to energy depletion and the phase change material (PCM) research for saving energy is also actively investigating. In this research, the membrane emulsification using SPG membrane was used to make various microencapsulated phase change material (MPCM) particles which were comprised of $Rubitherms^{(R)}$ (RT-21 and RT-24) core and silica coating. We investigated the pressure of the dispersion phase, the concentration of surfactant, and the ratio of $Rubitherm^{(R)}$ and silica to prepare various MPCM particles. The DSC and TGA were used to examine the heat stability and latent heat properties. Also, PSA, SEM, and optical microscopy were used to confirm the size of $Rubitherm^{(R)}$ particles and the thickness of silica shell. The average of particle size was $7-8{\mu}m$. And, FT-IR was also used to enforce the qualitative analysis. Finally, the MPCM particles obtained from membrane emulsification showed monodispersed size distribution and the heat stability and latent heat were kept up to 80% compared to pure $Rubitherm^{(R)}$. So, it can be effectively used for wallpaper, buildings and interior products for energy saving as PCMs.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.1-10
• /
• 2017

This study examined the risk of accidents when handling hazardous materials in hazardous materials storage facilities without safety facilities. In the case of illegal dangerous cargo containers, the burning rate is very fast in the case of fire, which leads to explosions, that are damaging and difficult to control. In addition, accidents that occur in flammable liquid hazardous materials are caused mostly by accidents that occur in the space due to leakage. Therefore, the variables that affect these accidents were derived and the influence of these variables was investigated. Numerical and computational fluid dynamics programs were used to obtain the following final results. First, when a flammable liquid leaks into a specific space, it is influenced by temperature and relative humidity until a certain concentration (lower limit of combustion) is reached. In the case of temperature, it was found that the reaching time was shorter than the flash point In addition, the effect of variables on pool fire accidents of leakage tanks is somewhat different, but the variables that have the largest influence are the wind speed. Therefore, it is expected that the results of this study will be used as basic data for similar numerical analysis and it will provide useful numerical information about the accidental leakage of hazardous materials under various research conditions.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.313-324
• /
• 2010

There are many problems in application of FRP reinforcing bars as shear reinforcement, since bending of FRP bars is not a feasible process on construction site. Even though FRP bars can be manufactured in bent shape, they have lower strength at bent location. However, there are no serious problems to use FRP bars as flexural reinforcement. Plates or slabs like bridge decks, in general, do not need shear reinforcements. These types of members with FRP flexural reinforcement have lower shear strength than those with conventional steel flexural reinforcement. However, reliable process or equation for shear strength estimation of FRP reinforced concrete without shear reinforcement are not established, yet. In this study, predicted shear strength obtained from available design equations and assessment equations are compared with 211 experimental results. The results showed that among the current design codes, the Architectural Institute of Japan (AIJ) and the Institution of Structural Engineers (ISE) provided the best estimation. ACI 440.1R-06 provided conservative results with degree of dispersion similar to that of ISE. In addition, regression analysis on the collected experimental results was conducted to develop regression models. As a result, a new reliable shear strength equation was proposed.

• Journal of Hydrogen and New Energy
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2017

Cu/Mn/Ce catalysts for water gas shift (WGS) reaction were synthesized by urea-nitrate combustion method with the fixed molar ratio of Cu/Mn as 1:4 and 1:1 with the doping concentration of Ce from 0.3 to 0.8 mol%. The prepared catalysts were characterized with SEM, BET, XRD, XPS, $H_2$-TPR, $CO_2$ TPD, $N_2O$ chemisorption analysis. The catalytic activity tests were carried out at a GHSV of $28,000h^{-1}$ and a temperature range of 200 to $400^{\circ}C$. The Cu/Mn(CM) catalysts formed Cu-Mn mixed oxide of spinel structure ($Cu_{1.5}Mn_{1.5}O_4$) and manganese oxides ($MnO_x$). However, when a small amount of Ce was doped, the growth of $Cu_{1.5}Mn_{1.5}O_4$ was inhibited and the degree of Cu dispersion were increased. Also, the doping of Ce on the CM catalyst reduced the reduction temperature and the base site to induce the active site of the catalyst to be exposed on the catalyst surface. From the XPS analysis, it was confirmed that maintaining the oxidation state of Cu appropriately was a main factor in the WGS reaction. Consequently, Ce as support and dopant in the water gas shift reaction catalysts exhibited the enhanced catalytic activities on CM catalysts. We found that proper amount of Ce by preparing catalysts with different Cu/Mn ratios.

• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.1-10
• /
• 2011

The geology of the Pacitan district which occupies Southern mountain zone in the southwestern margin of East Java, Indonesia, consists of a pile of clastics and pyroclastics grading upwards into a series of sediments of Middle Miocene age which are intruded by a number of quartz porphyries and subvolcanic dacitic to andesitic bodies in after that time. The geochemical exploration in the Pacitan district to find out anomalous areas related with metallic mineral dispersion from the concealed ore deposits had been carried out using traditional exploration techniques of geological mapping, stream sediment, panned concentrate and outcrop sampling. The anomalous zones of each element were detected in the following areas: Gempol for Cu; Jompong for Au; Kasihan for Cu-Pb-Zn. The strongest Cu-Pb-Zn anomalous values are overlapped at the Kasihan area. The geochemical survey of soil was conducted with the geological survey at the Kasihan area. The statistical values were calculated by the statistical analysis method. The patterns for Cu, Pb and Zn are similar to the normal distribution. The anomalous values of copper-lead-zinc and/or copper and zinc are overlapped at five zones surrounding quartz porphyry at the central part of the Kasihan area. The area was interpreted and chosen as an anomalous zone related with stockwork and skam mineralization, extending to approximately NNW-SSE direction.