• 한국분말재료학회지
• /
• 제19권5호
• /
• pp.343-347
• /
• 2012

In this study, an oxygen plasma treatment was used as a low temperature debinding method to form a conductive copper feature on a flexible substrate using a direct printing process. To demonstrate this concept, conductive copper patterns were formed on polyimide films using a copper nanoparticle-based paste with polymeric binders and dispersing agents and a screen printing method. Thermal and oxygen plasma treatments were utilized to remove the polymeric vehicle before a sintering of copper nanoparticles. The effect of the debinding methods on the phase, microstructure and electrical conductivity of the screen-printed patterns was systematically investigated by FE-SEM, TGA, XRD and four-point probe analysis. The patterns formed using oxygen plasma debinding showed the well-developed microstructure and the superior electrical conductivity compared with those of using thermal debinding.

• Reproductive and Developmental Biology
• /
• 제36권3호
• /
• pp.155-161
• /
• 2012

Germ cell-specific hyaluronidases such as sperm adhesion molecule 1 (SPAM1) and hyaluronoglucosaminidase 5 (Hyal5) are in part responsible for dispersal of the cumulus cell mass, which is a critical step in establishing fertilization in mammals. In this study, we identified two testis-hyaluronidases, SPAM1 and Hyal5, in hamster and rat. These two genes were expressed specifically in the testis. At the protein level, hamster SPAM1 and Hyal5 display 78.7% and 75.4% identity with mouse SPAM1 and Hyal5. Further, the activity of the enzymes with respect to cumulus cell dispersion did not differ, although we observed that the enzymatic activity differed in pH range. These studies suggest that different sperm hyaluronidases are capable of dispersing the cumulus cell mass despite differences in enzyme activity.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.1-7
• /
• 2012

Recently an optical diffusion of LED lamps has been studied actively. In this paper, the second lens applied to a cover of the LED lamp was analytically designed to having a wide angle distribution of light without diffuser characteristic by dispersing agent. In this process, We found a major factors that can help improve the performance of the lens. It is the refractive power of the lens, the Mie particle density of phosphor, and the arrangement of the LED. Through the final simulation, we can see the LED lamp is possible to get wide angle light distribution by proper source modeling and second lens designing. Also, we can see this simulated results are entirely consistent with measured data for light distribution. In this research, we present the shape of the second lens with wide angle distribution and derive the important factors for the second lens design.

• 열처리공학회지
• /
• 제33권5호
• /
• pp.226-231
• /
• 2020

The Cu-Co-Si alloy shows high strength by forming precipitates by aging precipitation heat treatment of supersaturated solid solution treated with solution treatment such as Cu-Ni-Si alloy, and the Co₂Si precipitated phase is dispersed in the copper matrix. The effect of aging treatment on the microstructure, mechanical and electrical properties of Cu-Co-Si alloys for electronic devices was investigated. As a results of SEM/EDS analysis, it was found that Co₂Si precipitates of 30~300 nm size were distributed in grains. By performing the double aging treatment, it was possible to improve the strength and electrical conductivity by dispersing the fine precipitate evenly.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.94-98
• /
• 2000

Sodium N-acyl N-methyl taurates were synthesized by effectual acylation of fatty acid ethyl esters $C(C_{12}{\sim}C_{18})$ and N-methyl taurine. All the surface activities including krafft point, solubility, interface tension, foaming power, lime-soap dispersing ability and detergency were measured, and cmc was evaluated in dilute aqueous solution.

• 한국주조공학회지
• /
• 제10권4호
• /
• pp.309-315
• /
• 1990

Aluminum alloy matrix composites reinforced by SiC particles were prepared by rheocompocasting, a process which consists of the incoporation and distribution of reinforcement by stirring within a semi-solid alloy. When the volume fraction of SiCp and stirring speed were fixed, the dispersion of SiCp in Al-matrix alloy depended on stirring time and solid volume fraction in slurry. The results were as follows : 1) As a dispersed SiCp during stirring at $647^{\circ}C$ in 6063-Al alloy, SiC was better dispersed than that other temperature, where solid volume fraction was 43% in slurry. 2) When increased solid fraction in slurry, rate of dispersing SiC increased during stirring and porosities decreased in matrix alloy after casting. 3) Inspite of stirring with 800rpm, since solid particles of matrix alloy in slurry joined each other and occured joining growth, so that SiC was not dispersed into solid particle.

• 약학회지
• /
• 제38권6호
• /
• pp.654-663
• /
• 1994

Lipiodol-anticancer suspensions containing fluorouracil, tegafur, mitomycin C, methotrexate, or adriamycin were prepared by Shinohara method using aluminum monostearate as a dispersing stabilizer. Lipiodol-suspension showed thixotropic property when the concentration of aluminum monostearate was above 2%. Observed thixotropic area which reflects the extent of thixotropic breakdown indicated that the thixotropic property of Lipiodol-suspensions maintained for six weeks in a refrigerator$(4^{\circ}C)$. Lipiodol-anticancer suspensions containing 2% aluminum monostearate maintained a more stable suspension system compared with simple mixtures and Lipiodol-anticancer suspensions without aluminum monostearate. As the concentration of aluminum monostearate increased, the drug release from Lipiodol-anticancer suspensions was more retarded.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3899-3902
• /
• 2013

• 한국환경과학회지
• /
• 제17권7호
• /
• pp.711-717
• /
• 2008

The use of support materials on the nanoparticle synthesis and applications has advantages in many aspects; resisting the aggregation and gelation of nanoparticles, providing more active sites by dispersing over the supports, and facilitating a filtering process. In order to elucidate the influence of the supports on the nitrate reduction reactivity, the supported iron nanoparticles were prepared by borohydride reduction of an aqueous iron salt in the presence of supports such as activated carbon, silica and polyethylene. The reactivity for nitrate reduction decreased in the order of unsupported Fe(0) > activated carbon(AC) supported Fe(0) > polyethylene(PE) supported Fe(0) ${\ge}$ silica supported Fe(0). Rate constants decrease with increasing initial nitrate concentration implying that the reaction is limited by the surface reaction kinetics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.528-530
• /
• 2003

We present a novel photo-addressable electronic paper using an electrophoretic device, which can show and sustain the 2D images transferred by the UV illumination. The device consists of the organic photoconducting layer reacting with the UV illumination and the electronic ink (white particles and blue dye) dispersing in a suspending medium. The voltage impression under illuminating of UV make an image be transferred to the electrophoretic cell. The transferred image can be maintained by the bistability of the electrophoretic device.