• KSBB Journal
• /
• v.31 no.4
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.71-81
• /
• 2000

The water-based ink has lately attracted considerable attention because of problems of energy and population. Carbon blacks have been widely utilized in water-based systems to provide pigmentation. One of the most important factors in the successful formulation of an aqueous system containing carbon black is the dispersion and the selection and proper utilization of the dispersing agent. This is similar to water-based ink. This paper discusses dispersion of carbon black with the factors affecting the dispersing agent requirement (DAR) and describes a laboratory method for determining it. Variables that affect the dispersion, such as structure, surface area, and oxidation level of the carbon black are examined through test data. Anionic and nonionic dispersing agents are evaluated using the DAR method. From this study, the increased surface area, the increased DAR is indicated. DAR is indicated to depend on HLB(Hydrophilic Lipophilic Balance) of dispersing agent and pH of dispersing system.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.503-511
• /
• 2001

Present silica dispersing agents are based mainly on fatty acid derivatives of Zn, K and mixture of fatty acid and metallic soaps are used to increase activity. The viscosity of silica filled rubber is lowered by Zn-K soap type silica dispersing agent, thus fluidity of hydrocarbon chains and processibility is improved. Silica dispersing agent should not exert an influence on chracteristics of vulcanization. But scorch and curing time is shortened by Zn-K soap type silica dispersing agent. A newly developed silica dispersing agent, which is a nonmetal type agent, reduced the viscosity and hardness of silica compounding rubber, and the highly increased degree of dispersion of silica is caused by interaction of silica and rubber. Also it did not affect the curing characteristics and scorch stability of silica compounding rubber.

• Korean Journal of Materials Research
• /
• v.34 no.2
• /
• pp.95-104
• /
• 2024

Nanoparticles are commonly used to avoid the opaque white color of TiO₂ based sunscreen. However, a dispersing agent is typically required because of the tendency of the nanoparticles (NPs) to agglomerate. Stearic acid is one kind of dispersing agent often used for sunscreen products. However, according to the MSDS data sheet on stearic acid, stearic acid is highly hazardous to aquatic life and causes irritation on human skin. To avoid this problem, in this study a safer organic dispersing agent extracted from Korean seaweed has been studied to disperse TiO₂ nanoparticles, and further use as an active agent in sunscreen products. The presence of phytochemicals in seaweed extract, especially alginate, can disperse TiO₂ nanoparticles and improve TiO₂ dispersion properties. Results show that seaweed extract can improve the dispersion properties of TiO₂ nanoparticles and sunscreen products. Reducing the agglomeration of TiO₂ nanoparticles improves sunscreen properties, by making it less opaque white in color, and increasing UV protection value. It was also confirmed that adding seaweed extract into sunscreen products had no irritating effects on the human skin, making it more desirable for cosmetics application.

• YAKHAK HOEJI
• /
• v.39 no.1
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.719-723
• /
• 2003

The dispersing activity and physical properties of exopolysaccharide (Cystan) produced by Cystobacter sp. MSL-9 was studied. Dispersing activity of Cystan was measured by using bentonite, calcium carbonate, and kaolin. Rheological properties of Cystan were investigated by using a rheometer MCR300. It was found that dispersing activity of Cystan was maintained under various pH and temperature conditions. A particle size analyzer BI-9000AT was used for the particle size measurement of Cystan in aqueous solution. The high dispersing activity and stability under various pH and temperature conditions showed the feasibility of Cystan as a industrial biodispersant.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.117-128
• /
• 1998

Solid mattress foundation using geogrid has often been used on soft grounds to increase the bearing capacity, and its effect has received much recognition. Geogrid-mattress system is the method of construction which increases the bearing capacity and the effect of controlling settlement by dispersing load to wider foundation through its stiffness. But ifs mechanism has not been examined exactly yet. considered to be influential factors in the experiments. As a result of the experiments, the characteristic of dispersing stress under mattress foundations was understood and the way of calculating the bearing capacity in designing the mattress foundations was suggested.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.243-245
• /
• 2002

Pigment-dispersing factor (PDF) is an octadecapeptide distributed in the optic lobe and the brain in a variety of insect species. There are lines of evidence suggesting possible involvement of PDF in the insect circadian system. However, its physiological roles in the circadian time keeping mechanism have not been clearly defined. In this study, we have examined the phase shifting effects of Gryllus-PDF on the circadian locomotor rhythm in the cricket Gryllus bimaculatus of which circadian clock is located in the optic lobe. Phase shifts in the circadian activity rhythm were measured following microinjection of 22nl of vehicle (Ringer's solution) or O.lmM PDF into the optic lobe through the compound eye at various circadian times. The results showed that PDF induced phase shifts of the circadian clock in a phase-dependent manner, suggesting that it may play a role as an input signal for the circadian clock.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.3
• /
• pp.204-211
• /
• 2003

Poly(oxypropylene-oxyethylene glycol) block copolymer(PBC) oil dispersant, which has low toxicity, high biodegradability, and an excellent dispersion efficiency to crude oils and weathered W/O emulsion was prepared by blending PBC, poly(oxyethylene) oleate, and sorbitan monooleate. The dispersing efficiency was measured by swirling flask method. The PBC oil dispersant had an excellent dispersing efficiency to weathered oil products formed as stable W/O emulsion, and the low toxicity, such as 4000 ppm to Oryzias Latipes(24 hr, TLM), Brine Shrimp Artemia(24 hr, TLM).