• KSBB Journal
• /
• 제31권4호
• /
• pp.291-299
• /
• 2016

In this study, Indomethacin, the poorly water soluble drug, was selected and prepared dispersing oral disintegrating films according to the molecular weight of polyethylene glycol (PEG) which are sort of dispersing agents. Also the molecular weight and content of PEG were evaluated effect on the degree of dispersion, physical property and dissolution when making oral dispersing film containing indomethacin to find appropriate condition and suggested guidelines of making oral dispersing film. The appropriate dispersing ratio of the amount of surfactants and dispersing agent were 1% and 4%, also the stability dropped in the PEG molecular weight of 4000 or more. Drying time of oral dispersing film was $90^{\circ}C$ for 10 minutes to 12 minutes that dispersing film's property about flexibility, detachability were very good. The oral dispersion film's content used PEG 400 was $98.6{\pm}0.5%$ and the most uniform. As the molecular weight of PEG increased, dissolution time also increased. On the basis of evaluation parameter, PEG with 400~600 of molecular weight was selected as good dispersing agent in oral dispersing film. Therefore, it can be suggested guideline of preparation application study in oral dispersing film.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.71-81
• /
• 2000

The water-based ink has lately attracted considerable attention because of problems of energy and population. Carbon blacks have been widely utilized in water-based systems to provide pigmentation. One of the most important factors in the successful formulation of an aqueous system containing carbon black is the dispersion and the selection and proper utilization of the dispersing agent. This is similar to water-based ink. This paper discusses dispersion of carbon black with the factors affecting the dispersing agent requirement (DAR) and describes a laboratory method for determining it. Variables that affect the dispersion, such as structure, surface area, and oxidation level of the carbon black are examined through test data. Anionic and nonionic dispersing agents are evaluated using the DAR method. From this study, the increased surface area, the increased DAR is indicated. DAR is indicated to depend on HLB(Hydrophilic Lipophilic Balance) of dispersing agent and pH of dispersing system.

• 폴리머
• /
• 제25권4호
• /
• pp.503-511
• /
• 2001

기존 실리카 분산제는 주로 Zn, K의 지방산 유도체이며 지방산과 금속비누의 혼합물은 활성을 높이는데 사용되었다. Zn-K 비누 형태의 실리카 분산제는 탄화수소 사슬의 유동성을 증가시켜 실리카가 함유된 고무 배합물의 점도를 낮추어 주며 그 결과 가공성이 향상된다. 실리카 분산제는 가류 특성에 영향을 미쳐서는 안되는데 Zn-K 비누형태의 분산제는 스코치 및 가류시간을 단축시켰다. 그러나 새로이 개발된 분산제의 경우 금속을 함유하지 않은 non-metal 형태이며 분산제가 실리카와 고무간의 interaction을 유도하여 실리카 분산도를 크게 향상시켰으며 이로 인해 경도 및 점도 저하를 유도하였다. 또한 새로운 분산제는 실리카 고무배합물의 가교특성 및 스코치 안정성에 영향을 미치지 않았다.

• 한국재료학회지
• /
• 제34권2호
• /
• pp.95-104
• /
• 2024

Nanoparticles are commonly used to avoid the opaque white color of TiO₂ based sunscreen. However, a dispersing agent is typically required because of the tendency of the nanoparticles (NPs) to agglomerate. Stearic acid is one kind of dispersing agent often used for sunscreen products. However, according to the MSDS data sheet on stearic acid, stearic acid is highly hazardous to aquatic life and causes irritation on human skin. To avoid this problem, in this study a safer organic dispersing agent extracted from Korean seaweed has been studied to disperse TiO₂ nanoparticles, and further use as an active agent in sunscreen products. The presence of phytochemicals in seaweed extract, especially alginate, can disperse TiO₂ nanoparticles and improve TiO₂ dispersion properties. Results show that seaweed extract can improve the dispersion properties of TiO₂ nanoparticles and sunscreen products. Reducing the agglomeration of TiO₂ nanoparticles improves sunscreen properties, by making it less opaque white in color, and increasing UV protection value. It was also confirmed that adding seaweed extract into sunscreen products had no irritating effects on the human skin, making it more desirable for cosmetics application.

• 약학회지
• /
• 제39권1호
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.719-723
• /
• 2003

Cystan의 분산활성은 점토광물에 대한 침강속도가 완연히 느려짐을 확인하여 분산제로서의 성능이 우수함을 볼 수 있었으며, 넓은 범위의 중성 pH에서는 고르게 분산활성을 유지하는 것으로 밝혀졌다. 이는 rheological test에서도 알 수 있었는데, 여러 pH와 온도에서의 Cystan 용액의 점도측정결과 넓은 영역에서 pH 및 온도 변화에 따른 큰 차이가 없었다. Cystobacter sp. MSL-9에 의해 생산되는 Cystan은 분산활성과 안정성이 높으며 기존 화학분산제보다 환경친화적이어서 그 산업적 가치가 클 것으로 기대된다.

• 한국지반공학회지:지반
• /
• 제14권4호
• /
• pp.117-128
• /
• 1998

지오그리드를 이용한 입체적인 매트리스기초는 연약지반의 지지력을 증가시키기 위해서 증증 사용되며 그 효과를 인정받고 있다. 지오그리드-매트리스 시스템이란 그 자체의 강성에 의해 하중을 보다 더 넓게 기초지반에 분산시킴으로서 지지력의 증대효과 및 침하억제효과를 가져오는 공법이다. 그러나, 이에 대한 메카니즘은 아직 명확하게 규명되어 있지 않다. 본 연구에서는 지오그리드 매트리스기초 아래 전파응력분포 특성을 파악하기 위해 모형실험을 실시하였고, 실험에서는 지오그리드 매트리스기초와 두께 및 지지하는 기초의 강성 등을 영향인자로서 고려하였다. 실험결과로부터 매트리스기초하의 전파응력분포 특성을 파악하였고, 지오그리드 매트리스기초 설계시 지지력을 구할 수 있는 방법을 제안하였다.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.243-245
• /
• 2002

Pigment-dispersing factor (PDF) is an octadecapeptide distributed in the optic lobe and the brain in a variety of insect species. There are lines of evidence suggesting possible involvement of PDF in the insect circadian system. However, its physiological roles in the circadian time keeping mechanism have not been clearly defined. In this study, we have examined the phase shifting effects of Gryllus-PDF on the circadian locomotor rhythm in the cricket Gryllus bimaculatus of which circadian clock is located in the optic lobe. Phase shifts in the circadian activity rhythm were measured following microinjection of 22nl of vehicle (Ringer's solution) or O.lmM PDF into the optic lobe through the compound eye at various circadian times. The results showed that PDF induced phase shifts of the circadian clock in a phase-dependent manner, suggesting that it may play a role as an input signal for the circadian clock.

• 한국응용과학기술학회지
• /
• 제20권3호
• /
• pp.204-211
• /
• 2003

Poly(oxypropylene-oxyethylene glycol) block copolymer(PBC) oil dispersant, which has low toxicity, high biodegradability, and an excellent dispersion efficiency to crude oils and weathered W/O emulsion was prepared by blending PBC, poly(oxyethylene) oleate, and sorbitan monooleate. The dispersing efficiency was measured by swirling flask method. The PBC oil dispersant had an excellent dispersing efficiency to weathered oil products formed as stable W/O emulsion, and the low toxicity, such as 4000 ppm to Oryzias Latipes(24 hr, TLM), Brine Shrimp Artemia(24 hr, TLM).