• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.29-43
• /
• 1999

As real-time processing of data with large storage space is required in the era of multimedia, disk arrays are generally used as storage subsystems which be able to provide improved I/O performance. To design the cost-effective disk array, it is important to develop performance models which evaluate the disk array performance. Both queueing theory and simulation are applicable as the method of performance evaluation through queueing modeling. But there is a limit to the analytical method using queueing theory due to the characteristics of disk array requests being serviced in the parallel and concurrent manner. So in this paper we evaluate the disk array performance using simulation method which abstract disk array systems in the low level. Performance results were evaluated through simulation, so that mean response time, mean queueing delay, mean service time, mean queue length for disk array requests and utilization, throughput for disk array systems, can be utilized for capacity planning in the phase of disk array design.

• 한국컴퓨터정보학회논문지
• /
• 제18권4호
• /
• pp.131-140
• /
• 2013

본 논문은 분산 스토리지 시스템과 같이 디스크를 내장하고 있는 다수의 컴퓨터 노드로 구성되어 있는 스토리지 시스템에서 개개의 디스크 스펙 변화에 따른 전체 성능을 분석하고자 할 때 잘 알려져 있는 블록 I/O 수준의 디스크 시뮬레이터인 DiskSim과 시스템수준의 시뮬레이터와의 연동을 위한 인터페이스의 설계 및 구현에 관한 기법을 제안하였다. 본 연구에서 시스템수준 시뮬레이션 엔진으로는 계층적이고 모듈러한 모델링 기법을 지원하는 DEVS 형식론을 지원하는 범용 이산사건시스템 시뮬레이션 엔진인 DEVSim++을 목표로 하였고 이식성을 위해 DiskSim과 DEVSim++ 시뮬레이션 엔진의 내부는 수정하지 않는 것을 가정하였다. 이를 만족하기 위해 I/O 수준의 DiskSim 시뮬레이터와 시스템 수준의 DEVSim++ 기반 시뮬레이터 사이의 연동 인터페이스 구조를 제안하였다. 이 구조에서는 여러 인스턴스의 DiskSim을 관리하는 DiskSimManager의 개념을 도입하여 I/O 수준 시뮬레이션과 시스템 수준 시뮬레이션 간의 시간과 사건(데이터) 동기화를 담당하도록 설계하였고, 시스템 수준의 DEVS 모델에서 간편하게DiskSim을 접근할 수있도록 감싸는 DEVS wrapper 모델을 제안하였다. 벤치마크 실험결과 설계 구현된 연동 인터페이스를 사용한 시뮬레이션 결과는 DiskSim만의 단독 시뮬레이션 결과와 정확히 일치함을 확인함으로써 설계 구현된 연동 인터페이스가 목적에 맞게 잘 동작함을 입증하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.318-328
• /
• 2018

Disk type underwater gliders are a new type of underwater gliders and they could glide in various directions by adjusting the internal structures, making a turnaround like conventional gliders unnecessary. This characteristic of disk type underwater gliders makes them have great potential application in virtual mooring. Considering dynamic models of conventional underwater gliders could not adequately satisfy the motion characteristic of disk type underwater gliders, a nonlinear dynamic model for the motion simulation of disk type underwater glider is developed in this paper. In the model, the effect of internal masses movement is taken into consideration and a viscous hydrodynamic calculation method satisfying the motion characteristic of disk type underwater gliders is proposed. Through simulating typical motions of a disk type underwater glider, the feasibility of the dynamic model is validated and the disk type underwater glider shows good maneuverability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.833-836
• /
• 2007

Load/Unload technology has more benefits than the conventional CSS technology. However, it remains unsolved technical problem on the unloading process. While the slider climbs up the ramp at the outer edge of the disk, the possibility of the slider-disk contact by lift-off force and rebound of the slider increases. This paper focuses on no slider-disk contact. To prevent the slider-disk contact, we apply the disk bump on disk outer edge proceeding unload. Firstly, in the simulation, the bump dimension is determined by changing bump design parameters. Secondly, dynamic stability of slider have to be checked on disk bump before unload analysis, and unload analysis is performed by applying stable bump shapes to unload simulation. Thirdly, we select optimal bump shape to improve unload performance by unload analysis. Finally, in the experiment, the disk bump is mechanically manufactured by pressing disk surface using diamond tip. That is variously processed by changing pressing pressure. After confirming bump shape by nano-scanner, proper bump shape is applied to real experimental unload process. Through this investigation, we propose the optimal bump design to prevent the slider-disk contact, and then we can realize improved unloading performance.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.245-250
• /
• 2006

Organizations such as broadcasting stations and libraries which deal with huge amount of information require high-capacity storage systems for archiving their materials and information. It is necessary and urgent for the storage people to develop a compact, high capacity, and low-cost data storage systems. Even though the Blue-ray technology is commercialized and now it is on the market, demand for the compact and low-cost system is still increasing. A flexible disk system has been introduced recently to satisfy above mentioned requirements. The system uses multiple of thin disks and is expected to achieve technical requirements. However, decreasing the disk thickness makes it difficult to read and write data because it decreases the disk rigidity so that the transverse vibration of the rotating disk increases easily due to both the interaction with surrounding air and the vibration characteristics of thin flexible disk itself. In this study, flat-type stabilizer is proposed to suppress the transverse vibration of a $95{\mu}m$-thick polycarbonate disk. Characteristics of disk vibration have been studied through the results of numerical analysis from the fluid mechanics point of view. Numerical simulation is verified through the experiment by measuring the gap between the rotating disk and the stationary flat stabilizer. The axial deflections of the disk are computed for various rotating speeds and reference gap sizes and then a method of regression is applied to those data. As a result, an empirical relation is proposed for the steady deformation shape of the rotating disk.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.533-538
• /
• 2002

This research demonstrates the transient response of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. head-suspension system is modeled by the cantilever in order to get simulation results. Simulation results about total system of HDA are calculated by Runge-Kutta method.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1075-1082
• /
• 2004

This research demonstrates the shock response analysis of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. Head-suspension system is modeled as the cantilever in order to get simulation results. Simulation results of HDA are calculated by Runge-Kutta method. Finally, shock responses of head and disk are analyzed according to the change of the rotating speed of the disk.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.82-87
• /
• 2000

The direct simulation Monte Carlo (DSMC) method is applied to investigate the flow field of a disk-type drag pump. The pumping channels are cut on both sides of a rotating disk. The rotor has 10 Archimedes' spiral blades. In the present DSMC method, the variable hard sphere model is used as a molecular model, and the no time counter method is employed as a collision sampling technique. For simulation of diatomic gas flows, the Larsen-Borgnakke phenomenological model is adopted to redistribute the translational and internal energies.

• 한국정밀공학회지
• /
• 제1권3호
• /
• pp.52-70
• /
• 1984

This paper presents a micro-computer simulation package for the various vibratory systems. The Package consists of 10 programs which describe the dynamical characteristics of the vibratory system. The programs have been written in BASIC (Appoesoft) language and programmed on the 6502 CPU with 48 KRAM. This simulation package is stored in 5 $^1/_4$ inch floppy disk. The user requires no simulation expertise on the part of designer. Through a process of disk operation, the user can easily under- stand how to use this package.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2201-2210
• /
• 2000

Vibration of a rotating disk-spindle system is analyzed by using Hamilton's principle, FEM and substructure synthesis. A rotating disk undergoes the rigid body motion and the elastic deformation. It s equation of motion is derived by Kirchhoff plate theory and von Karman nonlinear strain. A rotating shaft is described by Rayleigh beam theory considering the axial rigid body motion. The stationay shaft supporting the rotating disk-spindle-bearing system is modeled by Euler beam theory, and the stiffness of ball bearing is determined by A.B.Jones' theory. FEM is used to solve the derived governing equations, and substructure synthesis is introduced to assemble each structure of the rotating disk-spindle system. The developed theory is applied to the spindle system of a 35' computer hard disk drive with 3 disks to verify the simulation results. The simulation results agree very well with the experimental ones. The proposed theory may be effectively expanded to the complex structure of a disk-spindle system.