• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.627-632
• /
• 2010

In this paper the effect of the structure, particle size, morphology of nanofibers and nanoparticles for the electrochemical characteristics of $Li_4Ti_5O_{12}$ was investigated. The $H_2Ti_2O_5{\cdot}H_2O$ synthesized in hydrothermal treatment from a NaOH treatment on $TiO_2$ by ion exchange processing with HCl solutions. After the $Li_4Ti_5O_{12}$ nanofibers synthesized in hydrothermal treatment of $H_2Ti_2O_5{\cdot}H_2O$ and $LiOH{\cdot}H_2O$. The hydrogen titanate precursor prepared by ion exchange processing with 0.1~0.3M HCl solutions and the final products calcined at $350^{\circ}C{\sim}400^{\circ}C$. The $Li_4Ti_5O_{12}$ nanofibers showed well reversibility during the insertion and extraction of Li, good cycle performance, high capacity and low electrochemical reaction resistance than nanoparticles. also c-rate exhibited a discharge capacity of 172 mAh/g at 0.2C and 115mAh/g at 5C, which is the 77%, 67% of that obtained in the process charged, discharged at 0.2C.

• 한국지반공학회지:지반
• /
• 제12권1호
• /
• pp.73-86
• /
• 1996

본 연구에서는 국내 8개 석탄화력발전소에서 발생하는 석탄회중 영월화력발전소에서 부산되는 석탄회를 주 대상으로 순수 비회(FA)와 저회(BA), 회사장에 투기되는 흔합회(FA:BA=8:2), 적정비로 혼합된 석탄회(FA:BA=5:5),그리고 일반도로성토재에 대하여 토질역학시험을 통해 공학적 특성이 비교, 분석되었으며 석탄회를 성토재 및 매립재로서 대규모로 이용할 경우의 변형해석을 위해 Hyperbolic Mode야 적용시 필요한 제반 변수를 산정하였다. 석탄회의 토공재로서의 활용 가능성을 검토한 결과 석탄회는 동일입도의 일반 홀에 비해 강도 정수 등 유리한 공학적 특성을 갖고 있으며,특히 연약지반상에 매립 또는 구조물 됫채움재로서 사용할 경우 자경성, 경량성 등 우수한 조건을 지니고 있다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.59-61
• /
• 2005

In Korea, hundreds of abandoned and closed coal and metallic mines are present in the steep mountain valleys due to the depression of the mining industry since the late 1980s. From these mines, enormous amounts of coal waste were dumped on the slopes, which causes sedimentation and acid mine drainage (AMD) to be discharged directly into streams causing detrimental effects on soil and water environments. A limestone slurry by-product (lime cake) is produced from the Solvay process in manufacturing soda ash. It has very fine particles, low hydraulic conductivities ($10^{-8}{\sim}10^{-9}cm/sec$), high pH, high EC due to the presence of CaO, MgO and $CaCl_2$ as major components, and traces of heavy metals. Due to these properties, it has potential to be used as a neutralizer for acid-producing materials. A field plot experiment was used to test the application of lime cake for reclaiming coal wastes. Each plot was 20 x 5 m (L x W) in size on a 56% slope. Treatments included a control (waste only), calcite ($CaCO_3$), and lime cake. The lime requirement (LR) for the coal waste to pH 7.0 was determined and treatments consisted of adding 100%, 50%, and 25% of the LR. The lime cake and calcite were also applied in either a layer between the coal waste and topsoil or mixed into the topsoil and coal waste. Each plot was hydroseeded with grasses and planted with trees. In each plot, surface runoff and subsurface water were collected. The lime cake treatments increased the pH of coal waste from 3.5 to 6, and neutralized the pH of the runoff and leachate of the coal waste from 4.3 to 6.7.

• International Journal of Concrete Structures and Materials
• /
• 제8권4호
• /
• pp.279-287
• /
• 2014

This paper presents the findings of an investigation of the fiber content variations in concrete being discharged from a ready-mix truck at the construction site. Concrete samples were extracted from the truck drums at the beginning, middle and end of discharge. Subsequently, fibers in each sample were separated from the concrete, and weighed. Presumably, synthetic macro fibers will float towards the top, i.e. towards the drum opening, of the inclined, revolving truck-drum, while, on the other hand, steel fibers will tend to gravitate towards the lower parts of the mixer drum. Accordingly, the discharge batch, containing synthetic macro fibers, will contain a higher amount of synthetic fibers per unit volume at the start of discharge than the average unit volume fiber content of the mix, and the content will gradually decrease further down the batch. The discharge batch of steel fiber concrete will contain fewer fibers per unit volume at the start of discharge than the average unit volume fiber content of the mix, and the content should gradually increase further down the batch. The correctness of the foregoing is partly confirmed. A certain percentage of the truck loads did not comply with the proposed requirements, mainly steel fiber reinforced batches, indicating the necessity of a code or guideline amendment. A change in the Norwegian shotcrete directive was made in 2011, based upon experimental research work (2010), which, in combination with the subsequent University of Life Sciences report (2012), constitutes the foundation of this article.

• 전기화학회지
• /
• 제6권3호
• /
• pp.203-207
• /
• 2003

아연공기전지는 공기중의 산소를 사용하므로 cathode의 재활용이 가능하다는 장점이 있으며 아연의 이론용량이 820(mAh/g)로 상당히 높다 또한 아연공기전지는 저율방전에서 방전말기까지 아주 평탄한 방전전압을 유지한다. 그러나, 고율방전에서는 방전전압이 낮아지고 에너지가 감소하며 cathode에 포함되어 있는 PTF도의 함량에 따라 저항 및 기공율에 많은 변화를 보이고 있다. 이에 본 연구에서는 전지의 에너지, 방전용량, 방전전압, DC저항, GSM, ASTM에 의한 기공율 측정을 통해 cathode내의 PTFE함량이 아연공기전지에 미치는 영향을 연구하였다. 그 결과 결합제의 함량이 감소할수록 전지의 특성이 향상되었으며 $15wt\%$일 때 가장 우수한 전지특성을 얻을 수 있었다.

• 한국환경농학회지
• /
• 제42권3호
• /
• pp.177-183
• /
• 2023

Rendering, is attracting attention as a technology that can stably and quickly process livestock carcasses. However, large amounts of livestock carcass solid residues are discharged in this process and limited methods are available for recycling them. In this study, rendered animal carcass solid residues were pyrolyzed to produce carbonized materials (350℃; RACR-C) and their chemical properties were investigated. Further, RACR-C were applied to cabbage cultivation for investigating their crop growth characteristics and soil improvement effects. RACR-C contained large amounts of fertilizer components such as nitrogen and phosphorus, and showed no toxic effects on the seedling growth of crops. The content of water-soluble nutrients released from RACR-C under the reaction time increased rapidly within 30 min, but was insignificant compared to the total content. Thus, most fertilizer components in RACR-C were not readily soluble in water. The optimal application amount for applying RACR-C to cabbage cultivation based on the changes in cabbage growth, inorganic content, and soil chemistry was 200 kg/10a. Overall, pyrolysis of solid residues after rendering livestock carcass to produce carbonized material as a soil improver is an effective method to recycle the waste discharged from the rendering process.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.42-47
• /
• 2010

Polymer insulating materials such as cross linked polyethylene (XLPE) are employed in electric cables used for extra high voltage. These materials can degrade due to chemical, mechanical and electric stress, possibly caused by voids, the presence of extrinsic materials and protrusions. Therefore, this study measured discharge patterns, discharge phase angle, quantity and occurrence frequency as well as changes in XLPE under different temperatures and applied voltages. To quantitatively analyze the irregular partial discharge patterns measured, the discharge patterns were examined using a statistical program. A three layer sample was fabricated, wherein the upper and lower layers were composed of non-void XLPE, while the middle layer was composed of an air void and copper particles. After heating to room temperature and $50^{\circ}C$ and $80^{\circ}C$ in silicone oil, partial discharge characteristics were studied by increasing the voltage from the inception voltage to the breakdown voltage. Partial discharge statistical analysis showed that when the K-means clustering was carried out at 9 kV to determine the void discharge characteristics, the amount discharged at low temperatures was small but when the temperature was increased to $80^{\circ}C$, the discharge amount increased to be 5.7 times more than that at room temperature because electric charge injection became easier. An analysis of the kurtosis and the skewness confirmed that positive and negative polarity had counterclockwise and clockwise clustering distribution, respectively. When 5 kV was applied to copper particles, the K-means was conducted as the temperature changed from $50^{\circ}C$ to $80^{\circ}C$. The amount of charge at a positive polarity increased 20.3% and the amount of charge at a negative polarity increased 54.9%. The clustering distribution of a positive polarity and negative polarity showed a straight line in the kurtosis and skewness analyses.

• Ecology and Resilient Infrastructure
• /
• 제2권3호
• /
• pp.216-223
• /
• 2015

본 연구는 영주댐 건설사업 영향에 따른 멸종위기야생생물 1급 어류 흰수마자의 보전을 위하여 수몰예정지 내 흰수마자를 서식적합지로 이주시키고, 댐에 의한 내성천 상하류 단절 및 유전적 폐쇄에 대비하여 인공종묘생산 및 복원을 통해 내성천에 치어를 방류하여 그 결과를 관찰하였다. 영주댐 수몰예정지 내 흰수마자는 8회 이상 포획 시도에도 불구하고 서식이 확인되지 않아 이주가능지로 이주는 이루어지지 않았다. 내성천에서 포획한 친어 40개체를 통해 인공종묘생산한 치어 5,000개체는 친어의 유전 다양성을 물려받은 것으로 분석되었으며, 사전에 물리적, 생물학적 환경조건 분석을 통하여 자연 서식지와 유사한 최적방류지를 선정하여 인공종묘생산 치어를 방류하였다. 초기에는 방류지점을 중심으로 미소분산이 이루어졌으나, 시간흐름에 따라 확산이 진행되면서 재포획 개체수가 감소하였다. 포획된 방류 개체들은 내성천 자연생태환경에 적응하여 서식하고 있으며, 복부 팽만도가 높고 총배설공으로 배설물이 확인되는 점으로 보아 자연 먹이 섭식이 정상적으로 이루어지고 있는 것으로 나타났다. 따라서 인공종묘생산에 의한 영주댐 상하류 내성천 흰수마자 유전적 동질성 확보와 복원 개체군의 증강에 일차적 성공이 이루어지고 있는 것으로 파악되었으며 향후 장기적인 모니터링을 통한 지속적인 효과 분석이 필요할 것으로 전망되었다.

• 공업화학
• /
• 제16권5호
• /
• pp.693-697
• /
• 2005

제지산업에서 COD 부하 및 난분해성 COD 부하가 높은 생산지종별 발생폐수의 처리방안을 통하여 단위공정의 최적화와 방류수의 수질 안정화에 대해 연구하였다. 그 결과 1차 처리 공정에서는 SS와 더불어 colloid성 물질제거를 통한 COD 제거효율을 향상시키기 위해서 음이온 응집제 및 Alum의 병행사용이 효과적인 것으로 분석되었다. 또한 Fenton 산화법의 병행사용으로 인한 약품의 과량투입은 수질상태에 악영향을 주는 것으로 확인되었기 때문에 최적량인 $FeCl_2$와 $H_2O_2$의 비가 1:1인 농도비 1000 ppm 일 때 COD 제거율이 가장 높다고 판단된다.

• 유통과학연구
• /
• 제18권9호
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.