• 한국수자원학회논문집
• /
• 제44권12호
• /
• pp.991-1000
• /
• 2011

저수지 탁수 모델링에서 실측자료가 없는 경우 유입하천 부유사 농도(SS) 산정을 위해 유량(Q)과 SS 관계식이 자주 사용된다. 일반적으로 하천을 통과하는 SS 부하율은 유량에 의해 변동된다는 가정 하에 유량과 SS의 멱함수(SS=aQb) 관계가 가장 빈번히 적용되고 있다. 그러나 Q-SS 관계는 측정 지점에 따라 배타적 특성을 가지며, 동일 지점에 대해서도 연중 계절적 변동성이 있다. 더욱이, Q-SS 관계는 동일한 수문곡선에서도 유량 상승기와 하강기에 이격현상을 보이기도 한다. 본 연구의 목적은 용담댐 저수지와 소양강댐 저수지 유입 하천에서 강우시 연속 실측한 자료를 바탕으로 Q-SS 관계의 이격현상을 고찰하고, SS 부하율 산정 오차에 미치는 영향을 분석하는데 있다. 연구결과, Q-SS 관계는 홍수사상 동안 높은 분산도와 시계방향의 이격현상을 보였으며, 동일한 유량에 대해 유량 상승기가 하강기보다 SS 농도가 높게 나타났다. 이러한 이격현상은 저수지로 유입하는 SS 부하량 산정에 있어 유의할 만한 오차로 작용하였으며 Q-SS 멱함수는 실측 부하량을 과소평가하는 결과를 가져왔다. 이것은 저수지 탁수모델링에서 중요하게 고려해야 할 사항이다. 본 연구에서는 Q-SS 관계식의 대안으로 탁도-SS관계가 제시되었다. 탁도-SS 관계는Q-SS 관계보다 분산도가 작았으며 실측 부하량과의 오차를 획기적으로 줄였다. 따라서 저수지로 유입하는 SS 부하율의 보다 정확한 산정과 탁수모델링의 신뢰도를 높이기 위해서는 유입 탁도에 대한 실시간모니터링이 필요하다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.697-703
• /
• 2003

For a single stage two cylinder rotary compressor, an analytical study has been made on the discharge gas pulsation. Discharge system of the twin rotary compressor consists of lower and upper mufflers and connecting passage holes between them, and cavities on both sides of the motor and passages between them. Acoustic modeling for the discharge system by transfer matrix method gives acoustic impedances at discharge valves so that gas pulsation at the valve sections can be obtained from discharge mass velocity. Since the mass velocity and the pressure pulsation at the valves are affected by each other, iteration should be made for convergence. Gas pulsations at other sections can also be calculated by using transfer matrix.

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.144-154
• /
• 2005

The use of ozone gained acceptance in the production of ultrapure water because of its powerful oxidizing ability. Ozone is currently used to deactivate microorganisms and remove organic contaminants. However, interest also exists in using radical species, which arc stronger oxidants than ozone, in such processes. One means of producing radical species is by corona discharge. This work investigates the use of a novel pulseless corona-discharge system for the removal of organic substances in ultrapure water production. The method combines corona discharge with electrohydrodynamic spraying of oxygen, forming microbubbles. Experimental results show that pulseless corona discharge effectively removes organics, such as phenol and methylene blue, in deionized water. The corona-discharge method is demonstrated to be comparable to the direct use of ozone at a high-applied voltage. The results also show that a minimum applied voltage exists for operation of the corona-discharge method. In this work, the minimum applied voltage is approximately 4.5 kV. The kinetic rate or phenol degradation in the reactor is modeled. Modeling results show that the dominant species of the pulseless corona-discharge reactor are hydroxyl radical and aqueous electron. Several radical species produced in the pulseless corona-discharge process are identified experimentally. The. major species are hydroxyl radical, atomic hydrogen species, and ozone.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.106-109
• /
• 1999

This paper introduces a fluorescent lamp model based on gas discharge phenomena. This model was applied to electronic ballast. Simulation and experimental results were presented to verify the feasibility of the modeling.

• 한국해안해양공학회지
• /
• 제14권2호
• /
• pp.108-115
• /
• 2002

만경강·동진강 유역의 오염물질 유출모형을 수립·적용하였다. 모형의 입력자료인 유역정보 및 오염원 정보는 GIS도구를 이용하여 추출·분석한 자료를 이용하였으며, 월별 유출량 및 하천의 오염물질 농도 관측자료와 모형의 계산결과를 비교·분석하였다. 분석결과, 유역유출량은 여름철에 약간 과소 추정하고 있으나 전체적인 변화경향은 일치하고 있다. 또한 모형에서 계산된 오염물질 농도는 10년 평균 수질자료와 1999년도 월별 수질자료를 이용하여 비교하였다. 그 결과, 익산천에서는 크게 과소 추정하고 있으나, 전체적으로는 양호한 정도로 일치하고 있는 것으로 파악되었다 익산천에서 과소 추정하는 이유는 오염퇴적물에 의한 국지적 영향으로 사료되며, 오염퇴적물이 수층에 미치는 영향을 규명하기 위해서는 하천의 퇴적물 오염도 관측·분석을 통한 심도깊은 연구가 수행되어야 할 것이다

• 소음진동
• /
• 제10권4호
• /
• pp.615-622
• /
• 2000

Discharge valve mechanism for an electrodynamic-oscillating compressor is different from that of a conventional reciprocating compressor. It has a larger discharge port area, heavier valve mass and stiffer valve spring comparing with the reciprocating one. Since the motion of piston is not kinematically restricted as in conventional reciprocating compressors, the stroke of the piston can change sensitively with supplied boltage and load. Thus piston can impact with discharge valve occasionally. This work deals on dynamic analysis of discharge valve considering all of those different characteristics. Impact is considered by a spring-mass model, and the pressure fluctuation at the both sides of the valve is also included considering the discharge port area and valve spring preload. It is assumed that piston moves in the region of between top and bottom dead center not by calculating piston motion from an electrodynamic equation but by getting values through experiment. Discharge pressure fluctuation is calculated using Helmholtz modeling. Finally, dynamic model for a discharge valve is constructed. In order to validate the model analysis results, the valve motion is experimentally measured and compared with analysis.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.129-137
• /
• 2014

This research presents an streamflow modeling approach in a data-scarce estuary reservoir watershed which has been suffered from high salinity irrigation water problem after completion of land reclamation project in South Korea. Since limited hydrology data was available on the Iwon estuary reservoir watershed, water balance relation of the reservoir was used to estimate runoff from upstream of the reservoir. Water balance components in the reservoir consists precipitation, inflow from upstream, discharge through sluice, and evaporation. Estimated daily inflow data, which is stream discharge from upstream, shows a good consistency with the observed water level data in the reservoir in terms of EI (0.93) and $R^2$ (0.94), and were used as observed flow data for the streamflow modeling. HSPF (Hydrological Simulation Program - Fortran) was used to simulate hydrologic response of upstream of the reservoir. The model was calibrated and validated for the periods of 2006 to 2007 and 2008 to 2009, respectively, showing that values of EI and $R^2$ were 0.89 and 0.91 for calibration period, 0.71 and 0.84 for validation period.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.53-57
• /
• 2007

In this paper, the intelligent estimation algorithm is developed for residual quantity estimate of lithium secondary cell and we suggest the control algorithm to get battery SOC through thermal modeling of electric cell. Lithium secondary cell gives cycle life, charge characteristic, discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc. Therefore, we make an accurate estimate of the capacity of battery according to thermal modeling to know the capacity of electric cell that is decreased by various special quality of lithium secondary cell. And we show effectiveness through comparison of value as result that use simulation and fuzzy logic.

• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.779-783
• /
• 2018

본 연구에서는 차량용 12 V 납축전지로 주로 사용되는 VRLA (Valve regulated lead acid) 배터리의 충/방전 특성과 노화에 따른 이의 변화를 수학적으로 모델링하였다. 기존에 리튬 이온 배터리의 거동 예측에 주로 이용되어 왔던 수학적 모델링 기법을 상용 70 Ah VRLA 배터리에 적용하였다. 정전류 충/방전에 따른 전압의 변화를 모델링 결과와 비교하였다. 비교 결과로부터 사용된 수학적 모델이 납축전지에도 높은 정확도로 적용될 수 있음을 알 수 있었다. 또한 이를 이용하여 납축전지의 노화를 예측할 수 있음을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.554-559
• /
• 1998

Equalizing the state of charge of cell that affects the charge/discharge quality and efficiency of the battery through the charge/discharge characteristic experiments of battery source, we develope the high efficiency charge/discharge system which would be used in serial HEV with the constant engine-generator output. For this, establishes the electrical model of Ni-MH battery appropriate to the high efficiency charge/discharge conditions. There is no model of Ni-MH cell, so we used Ni-Cd model and obtain the Ni-MH model through the experiment. A reason that each cell has the same charge/discharge property for applying the cell model to serial/parallel connected battery source extensively is needed. Therefore, in this paper, propose the Ni-MH charger/discharger has the equalization charging function and selectable cut-off function.