• Title/Summary/Keyword: Discharge current

Search Result 1,805, Processing Time 0.036 seconds

Research on the Development Management Basin and Goal for 3th T.W.Q on the Boundary between Metropolitan Cities/Dos Specified in Nakdong River Basin (낙동강수계 3단계 광역시·도 경계지점 목표수질 설정을 위한 관리권역 및 관리목표 설정 방법 연구)

  • Hwang, Ha Sun;Park, Ji Hyung;Kim, Yong Seok;Rhew, Doug Hee;Choi, Yu Jin;Lee, Sung Jun
    • Journal of Korean Society on Water Environment
    • /
    • v.31 no.5
    • /
    • pp.569-575
    • /
    • 2015
  • The current Total Pollution Load Control (TPLC) sets the Target Water Quality (TWQ) by utilizing the delivery ratio, unit loads, and water quality modeling, it also allocates the watershed's permitted discharge load. Currently, common target pollutants of every unit watershed in TPLC are BOD and T-P. This study has reviewed the 1th and 2th of TWQ setting process for the Nakdong River 3th TWQ setting in Total Pollution Load Control (TPLC). As a result of review, 1th and 2th were divided into one management basin (mulgeum) for setting management goals. However, 3th was divided into six management basins (mulgeum, gnagjeong, geumho river, nam river, miryang river, end of nakdong river). The principle of management goal setting were to achieve the objective criteria of Medium Areas for the linkage of the water environment management policy. And Anti-Degredation (principle of preventing deterioration) were applied to the 3th TWQ. Also, additional indicators were considered in accordance with the reduction scenarios for the final management goals.

A Study on Production of Nitrogen Oxides in Plasma Reactors

  • Lim, Gye-Gyu
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.17 no.E3
    • /
    • pp.91-99
    • /
    • 2001
  • Plasma reactor was used to generate a high potential difference between two surfaces of concentric pyrex tubes by electrical current. The annular gap of the reactor was calculated by trial and error from the breakdown voltage equation and set at 0.45 cm. The overall objective of this research was to know the effects of the frequency, humidity, and residence time on the formation of nitrogen oxides in a plasma reactor. The primary voltage varied from 50 to 90 volts and the frequency was varied in increments of 10 Hz from 60 to 650 Hz at the primary voltage of 90. The increase in the secondary voltage was not linear but exponential at high frequencies. At a maximum concentration of about 745 ppm, the frequency and secondary voltage was 600 Hz and 4,200 volts, respectively. All tests for the effects of humidity on NO$_{x}$ production were performed at the optimal setting of 90 colts and 600 Hz frequency. Since the NO$_{x}$ production was not an one dimensional phenomenon, competing reactions were assumed to occur in the discharge chamber. The sharp peak concentration of 1,810 ppm was observed at 38% of relative humidity, The enhanced production was choked off, and the production rate rapidly dropped to 3 ppm at above 40% of relative humidity. It is assumed that the corona attacks the most vulnerable molecules in the reaction chamber before attacking other more lightly bonded molecules, possibly at humidities above 38% and the optimized 90 volt setting. Thus, there was not enough energy left after attacking all water molecules to decompose an appreciable amount of $N_2$. If nitrogen breakdown does not occur, then oxides of nitrogen are not likely to be produced.ced.

  • PDF

A study of seasonal variation of the residual flow before and after Saemangeum reclamation (새만금간척전 .후 잔차류의 계절변화에 관한 연구)

  • 신문섭
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 1999.10c
    • /
    • pp.155-161
    • /
    • 1999
  • The land reclamation area of Saemangeum(Kunsan) is located between 126$^{\circ}$10' E~126$^{\circ}$50' E and 35$^{\circ}$35' N~356$^{\circ}$05'N at the western coast of the Korean peninsula. The are many small islands including extensive areas of semi-diurnally flooded and dewatered tidal flats. The reclamation area of Saemangeum has a range of 5.6m spring tide and the maximum tidal current speed is about 1.41m s-1 in ordinary spring tide. Most of the sediments deposited on the tidal flats are transported from the Geum river, the Manjyung river and The Dongjin river. The soil in this area consists of silty sand with the depth of 10m to 30m . The wind in winter is strong from the direction of northwest. In the past twenty years, land reclamation projects for agricutural purpose or industrial cocmplex have been mostly implemented along the western coast of Korea. Saemangeum coastal area is being constructed the33km sea dike and 40, 100ha reclamation area. The purpose of this study is to find the residual circulations in four seasons after the dike construction by a robust diagnostic and prognostic numerical model. Heat flux at the sea surface in January ,May , August , October was asopted on the basis on the daily inflow of solar radiation at the earth surface, assuming an average atomospheric transmission and no clouds , as a function of latitude and time of year(George L.P.J.E William, 1990). The discharge from the Geum , the Mankyung and the Dongjin rivers was adopted on the basis of experience formula of river flow in January , May ,August, October (The M. of C.Korea, 1993) . Water temperature and salinity along the open boundaries are obtained from the results of field observation s.

  • PDF

Readmission Rate: Experience in USA, Canada and UK (미국, 캐나다, 영국의 재입원율 활용 현황)

  • Lee, Sang-Ah;Ju, Yeong-Jun;Shin, Jae-Yong;Park, Eun-Cheol;Lee, Hoo-Yeon
    • Quality Improvement in Health Care
    • /
    • v.22 no.1
    • /
    • pp.29-37
    • /
    • 2016
  • Readmission which reflects capacity to manage patients and general level of medical services has been known for one of the causes of medical expenditure due to inefficient service. Compared to disease-specific readmission, hospital wide readmission (HWR) is relatively easy to understand, and has merit to get over limitation of collateral medical services assessment; therefore, a growing interest in development and usage of readmission indicator as quality of care indicator focusing on all-disease is detected. In this study, we investigate current state of risk standardized readmission rate indicator used in the United States, the United Kingdom, and Canada, and examine the considerations when using readmission rate as quality indicator in Korea. Differences in risk-adjustment methods were showed among countries. The United States do not control race not to hide socio-demographic factors on readmission. Canada shows differentiation compared to other countries about reflecting community factors. All three-countries utilize readmission rate as monitoring quality of care rather than incentives or penalty due to the fact that readmission rate could not represent the whole quality of hospital and has a limitation at controlling socio-economic factors. Therefore, for usage readmission rate as quality indicator in Korea, preparing readmission classification standard for Korean medical environment and additional methods for acquiring information by using discharge summary is need. Moreover, continued discussion with clinical specialists is needed for obtain clinical reliability and validity.

Grid-Connected Control of Hybrid Energy Storage (하이브리드 에너지 저장장치의 계통연계 제어)

  • Lee, Eon-Seok;Kang, Byeong-Geuk;Choi, Yong-Oh;Chung, Se-Kyo;Oh, Se-Seung;Chae, Suyong;Song, Yujin
    • Journal of the Korean Society for Railway
    • /
    • v.18 no.4
    • /
    • pp.325-334
    • /
    • 2015
  • This paper deals with a control method for a hybrid energy storage system (ESS) with a battery and super capacitor for grid-connected operation. To improve the grid regulation and to minimize the depth of discharge of the battery, control algorithms for the hybrid ESS are proposed. A p-q control with predictive current control is used for the inverters for the super-capacitor and the battery. To verify the effectiveness of the proposed control method, simulation studies using the PSIM and RTDS are carried out for the actual grid model.

A Study on ESD Robustness of Output Drivers for ESD Design Window Engineering (ESD 설계 마진을 위한 출력드라이버 ESD 내성 연구)

  • Kim, Jung-Dong;Lee, Gee-Du;Choi, Yoon-Chul;Kwon, Kee-Won;Chun, Jung-Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.12
    • /
    • pp.31-36
    • /
    • 2011
  • This paper investigates the ESD robustness of the stacked output driver with a 0.13um CMOS process. To represent an actual I/O system, we implemented stacked output driver circuits with pre-drivers and a rail-based power clamp. We implemented eight kinds of circuits varying pre-driver input connections and stacked driver size. The test circuits are examined with TLP measurements. It is shown that breakdown current and voltage can be increased by connecting the pre-driver input to a power supply and using stacked devices of a similar size. Based on the test results, design guideline is suggested to improve ESD robustness of the stacked output drivers.

Degradation of RF Receiver Sensitivity Due to TVS Diode (TVS Diode에 의한 안테나 무선감도 저하 분석)

  • Hwang, Yoon-Jae;Park, Je-Kwang;Yook, Jong-Gwan
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.24 no.10
    • /
    • pp.979-986
    • /
    • 2013
  • In this paper, a TVS diode which is commonly used as a ESD protector in wireless communication devices could cause antenna wireless sensitivity to decrease has been analyzed. When a smartphone doesn't have enough space to place many components, there would be its speaker near antenna area. In order to protect ESD coming through the speaker there also could be a TVS within antenna GND area. Digital audio signal which was sent to speaker and CDMA RF communication signal coupled from antenna was mixed by TVS. And this leakage current running through TVS resulted in decrease of antenna wireless sensitivity. The results of various experiments can be explained using circuit simulation. Following works will give us some insights that can reduce unwanted summation of digital and RF signal due to nonlinearity of ESD protectors.

Minimization of a CW CO2 Laser Output Ripple by using High Frequency Resonance Phenomena (고주파 공진현상을 이용한 CW CO2 레이저의 출력리플 최소화)

  • Sikander, Sakura;Kwon, Min-Jae;Kim, Hee-Je;Lee, Dong-Gil;Xu, Guo-Cheng
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.62 no.6
    • /
    • pp.798-802
    • /
    • 2013
  • In a conventional DC power supply used for CO2 laser, the circuit elements such as a rectifier bridge, a current-limiting resistor, a high voltage switch, energy storage capacitors ans a high-voltage isolation transformer using high turn ratio are necessary. Consequently, those supplies are expensive and require a large space. Thus, laser resonator and power supply should be optimally designed. In this paper, we propose a new power supply using high frequency resonance phenomena for CW(Continuous wave) CO2 laser (maximum output of 23W with discharge length of 450mm). It consists of a transformer including leakage inductance, magnetizing inductance and half-bridge converter, a three-stage Cockcroft-Walton and PFC(Power factor correction) circuit. The output ripple voltage can be controlled the minimum of 0.24% under the high frequency switching of 231kHz. Furthermore, the output efficiency was improved to 16.4% and the laser output stability of about 5.6% was obtained in this laser system.

Post-Intensive Care Syndrome Experience among Critical Care Survivors: A Meta-synthesis of Qualitative Research (집중치료 후 증후군 경험에 관한 질적 통합 연구)

  • Kang, Jiyeon;Jeong, Yeon Jin;Yun, Sun Young;Lee, Min Ju;Baek, Min Jung;Shin, So Yeung;Hong, Hee Jin;Kim, Soo Kyung;Cho, Young Shin
    • Journal of Korean Critical Care Nursing
    • /
    • v.10 no.1
    • /
    • pp.13-30
    • /
    • 2017
  • Purpose: The purpose of this study was to integrate the results of qualitative studies to understand critical care survivors' experience of the post-intensive care syndrome (PICS). Methods: This was a meta-synthesis of primary studies that used qualitative methods. We reviewed 26 qualitative studies on PICS selected from 8 international and Korean databases and from a manual search. Thomas and Harden's 3 stages (free coding, development of descriptive themes, generation of analytical themes) for thematic synthesis were utilized to analyze the collected qualitative data. Results: Four descriptive themes emerged from the thematic synthesis: weak physical conditions, psycho-emotional changes, the painful-memory of intensive care units, and social vulnerability. The analytical theme for the current study was "unfamiliarity with the vulnerable self." Critical care survivors had to confront entirely different "selves" after discharge from intensive care units. They had become physically weak, psychologically unstable, and the critical memories continued to create distress. These changes increased their social vulnerability by making them dependent on others, causing family conflicts, and changing interpersonal relationships. Conclusions: Finding from this qualitative synthesis and other related literature highlight the severity of PICS and the importance of rehabilitative intervention for critical care survivors.

  • PDF

ESD Failure Analysis of PMOS Transistors (PMOS 트랜지스터의 ESD 손상 분석)

  • Lee, Kyoung-Su;Jung, Go-Eun;Kwon, Kee-Won;Chun, Jung-Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.2
    • /
    • pp.40-50
    • /
    • 2010
  • The studies of PMOS transistors in CMOS technologies are reviewed- focusing on the snapback and breakdown behavior of the parasitic PNP BJTs in high current regime. A new failure mechanism of PMOSFET devices under ESD conditions is also analyzed by investigating various I/O structures in a $0.13\;{\mu}m$ CMOS technology. Localized turn-on of the parasitic PNP transistor can be caused by localized charge injection from the adjacent diodes into the body of the PMOSFET, significantly degrading the ESD robustness of PMOSFETs. Based on 2-D device simulations the critical layout parameters affecting this problem are identified. Design guidelines for avoiding this new PMOSFET failure mode are also suggested.