• 항공우주시스템공학회지
• /
• 제15권3호
• /
• pp.87-92
• /
• 2021

본 연구에서는 plunger 타입 유량조절장치를 적용한 가스발생기의 지상연소시험에서 발생한 현상에 대하여 해석적 접근을 수행하였고, 추후 가스발생기 설계에 요구되는 설계인자를 파악하였다. 토출관 내 연소 생성물이 부착되지 않은 경우의 압력상승은 콘 형태의 침식연소를 가정한 해석 결과와 경향이 유사하였으며, 다른 시험 결과에서의 압력상승은 침식연소와 함께 토출관 내 연소 생성물 부착에 따른 토출 특성 변화를 가정하여 해석한 결과와 유사한 경향을 보였다. 또한, 동일한 토출 특성 변화 상수에 대해 압력지수의 영향을 비교한 결과, 지상연소시험에서 수행한 그레인 형상과 토출면적에 대해 압력지수 0.45 이상의 경우에 연소 생성물 부착이 연소실 압력에 미치는 영향이 매우 큰 것으로 파악되었다.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• 제25권2호
• /
• pp.182-188
• /
• 2023

Objective: To report our experience with intraprocedural rupture (IPR) of intracranial aneurysms during endovascular treatment and evaluate alterations in vital signs as independent prognostic factors to predict the outcomes of IPR. Methods: Between January 2008 and August 2021, 34 patients (8 ruptured and 26 unruptured) were confirmed to have IPR based on our dataset with 3178 endovascular coiling procedures. The patients who underwent additional surgeries related to IPR were classified as the OP group (n=9), while those who did not receive additional surgeries were classified as the non-OP group (n=25). Vital signs were recorded during the procedure by anesthesiologists and analyzed. Results: Of the 34 patients included in this study, eight initially presented with subarachnoid hemorrhage due to a ruptured aneurysm. The clinical outcomes at discharge were significantly different between the two groups (p=0.046). In the OP group, five patients showed favorable outcomes at discharge, while four showed unfavorable outcomes. In the non-OP group, 23 patients showed favorable outcomes at discharge while two patients showed unfavorable outcomes. Maximal (MAX) systolic blood pressure (SBP) (odds ratio [OR] 1.520, 95% confidence interval [CI] 1.084-2.110; p=0.037) and higher differential value MAX-median blood pressure (MBP) (OR 1.322, 95% CI 1.029-1.607; p=0.044) remained independent risk factors for poor prognosis after IPR on multivariate logistic regression analysis. Conclusions: The MAX SBP and the difference between the maximal and baseline values of MBP are key factors in predicting the prognosis of patients after IPR, as well as providing useful information for predicting the outcome. Further research is required to confirm the relationship between naive pressure and prognosis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.820-823
• /
• 2000

The characteristics of wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of tungsten carbide in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension, the gap of deflection was decreased after thickness 60mm and discharge time of 6$\mu\textrm{s}$ due to the changing from fundamental mode to vibration mode. The deflection is the smallest at the water specific resistivity of 7.5 kΩ ㆍcm. The deflection is found to be decreased as increasing dwell time, and the result is due to the vibration of the pressure and the amount of the dielectric. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, was observed for rough wire-cutting EDM of STD-11. This phenomena is found to be decreased as the number of EDM is increased. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권9호
• /
• pp.648-655
• /
• 1999

In this study, a relationship between DC discharge and the radiated electromagnetic waves is investigated by measuring electromagnetic waves using a biconical antenna and a spectrum analyzer. The characteristics of frequency spectrum ofthe radiated electromagnetic waves was measured at the atmospheric pressure in Liquid Nitrogen $(LN_2)$ during partial discharges in nonuniform and uniform electric field depend on positive DC power. From this experiment results, it was confirmed that when partial discharge was produced in Liquid Nitrogen and Air, the signal of partial discharge was detected by this experiment and the analysis method. It is considered thatthese results obtained from this investigation may be used as fundamental data for diagnosis and prediction of insulation on the equipments ultra-high voltage, superconducting and cryogenic applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.82-85
• /
• 2006

As a display becomes large recently, Acquisition of high luminance and Luminance uniformity is becoming difficult in the existing CCFL or EEFL backlight system. So, study for a performance enhancement has enforced. but lamp development of flat type is asked for high luminance and a luminance uniformity security in of LCD and area anger trend ultimately. In this paper, we changed a tip shape of an electrode for production by the most suitable LCD backlight surface light source, and confirmed discharge characteristic along discharge gas pressure and voltage, and confirmed electric field distribution and discharge energy characteristic through a Maxwell 2D simulation. Therefore the discharge firing voltage characteristic showed a low characteristic than a rectangular type and round type in case of electrode which used tip of a triangle type, and displayed a discharge electric current as a same voltage was low.

• 한국수자원학회논문집
• /
• 제37권8호
• /
• pp.675-685
• /
• 2004

본 연구에서는 FLOW-3D를 이용하여, 테인터수문이 설치된 표준 월류형 여수로에서 수문을 부분 개방했을 경우에 대한 월류흐름 거동을 해석하였다. 모의결과, 유량계수는 약 0.685에서 0.723의 범위를 가지는 것으로 분석되었다. 수문을 완전 개방한 경우의 월류유량을 이용하여 수문을 부분 개방한 경우의 월류유량을 효과적으로 산정 할 수 있는 방법을 제시하였다. 수문의 개방고와 개방도에 따라 여수로면과 수문에 작용하는 압력분포의 특성을 분석하였다. 일정한 수문 개방고에 대해 수문의 개방도가 감소할수록 그리고 일정한 개방도에 대해 수문의 개방고가 높을수록, 여수로면에서 부압은 크게 발생하며 수문에 작용하는 무차원 최대압력은 증가하는 것으로 분석되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.732-735
• /
• 2009

In this paper, high Xe(Ne+Xe 10%, 20%, 30%) AC-PDP's discharge characteristics according to aging time were studied. The static margin, Vt close curve, discharge time lag was measured for experiments. According to increase of Xe partial pressure, the static margin and luminance was increased. As the result of analysis for misfiring probability, the misfiring is frequently occurred in accordance with increasing of aging time. To improve misfiring, we proposed 3Reset waveform and achieved misfiring probability which was improved.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.29-33
• /
• 2001

The luminance and discharge characteristics of an AC PDP may be significantly affected by a small amount of impurity gas in working gas. Impurity gases such as $O_2$, O , C and $H_2$ can be mixed in the manufacturing and lor discharge processes. In this paper, a small amount of impurity gas in AC PDP are introduced intertimally and the relationship between the amount of impurity gas and the luminance/discharge characteristics are investigated. The luminous efficiency decreased seriously with the increase in the partial pressure of impurity gases, especially in $H_2$, $O_2$ and $CO_2$, Under the condition of the impurity gas ratio of 2x $10^{-3}$ for Ar, $N_2$, $H_2$, $CO_2$ and $O_2$, the luminous efficiency decreased to about 8%, 8%, 32%, 36% and 50%, respectively.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.611-616
• /
• 2004

In this study, microfabrication of a micro-arcjet nozzle with Fifth-harmonic generation Nd：YAG pulses (wavelength 213 nm) and its thrust performance tests were conducted. A micro-arcjet nozzle was machined in a 1.2 mm thick quartz plate. Sizes of the nozzle were 0.44 mm in width of the nozzle exit and constrictor diameter of 0.1 mm. For an anode, a thin film of Au (~100 nm thick) was deposited by DC discharge PVD in vacuum on divergent part of the nozzle. As for a cathode, an Au film was also coated on inner wall surface. In operational tests, a stable discharge was observed for mass flow of 1.0mg/sec, discharge current of 6 ㎃, discharge voltage of 600 V, or 3.6 W input power (specific power of 3.6 MW/kg). In this case, plenum pressure of the discharge chamber was 80 ㎪. With 3.6 W input power, thrust obtained was 1.4 mN giving specific impulse of 138 sec with thrust efficiency of 24 %.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.177-180
• /
• 2010

혼합비와 연소압에 따른 이중 와류 동축 분사기의 유량계수 변화를 살펴보았다. 연료 과농 조건에서 액체산소와 케로신을 이용하여 이중 와류 동축 분사기의 연소시험을 수행하였다. 두 종류의 분사기가 시험에 적용되었는데, 산화제 분무각 변화에 의한 추진제간 모멘텀 비 차이와 연료 노즐 직경 차이로 인한 유량계수 영향 특성이 파악되었다. 연료 와류실을 연료가 모두 채운 상태에서 연소가 이루어지는 경우 화염 구조의 변화가 없어 혼합비에 다른 유량계수 변화 또한 보이지 않는 것으로 파악하였다.