• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.155-161
• /
• 1990

A Continous wave tunable $CO_2$ laser which is the slow axial flow type was construccted for the optical pumping of methyl alcohol ($CH_3OH$) laser. The reflective grating of 100 grooveslmm and 10.6$\mu\textrm{m}$ blaze wavelength was used to select wavelength. We have investigated continous outpu: power characteristics, and then have compared tuned output power profile with the gain curve of $CO_2$ laser. The optimum condition for maxium power was found at the gas mixing ratio 1 : 3 : 10 for $CO_2: N_2$ and He. under this condition the flow rate, pressure of lasing gas and discharge current are 9.5 llmin. 14 torr, and 55 mA respectively. The maxium output power was 55 Wlm. Output power of single wavelength operation was measured on 60 individual rotation vibration transitions in the P and K branches of the 9.5$\mu\textrm{m}$ band and 10.4$\mu\textrm{m}$ band in $CO_2$. The output power profile obtained from each band is well consistent with the gain curve of $CO_2$ laser and maxium tuned output power was 20 watt.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.5
• /
• pp.1-11
• /
• 2001

In the past, abundant and clean water was available for paper mills'use. However, the growth of population and industry made water less available nowadays. Also, environmental regulation limits wastewater discharge, which affects mill operation cost. Therefore, paper mills are under pressure to use more recycled water and mill system closure. As a result, chemical and physical parameters of water are changing and new environment if being created for microorganisms in paper mill system as well. The more soluble or suspended organic materials are increased as more water is recycled and less or scarce dissolved oxygen is available, depending on the degree of recycled water usage. Microorganism flora ill paper mill system will be a1so shifted according to the environmental change of mill system. Anaerobic bacteria, including sulfate reducing bacteria (SRB), will be dominant in the system as very low or almost no oxygen available in the system. Nevertheless, it is common in domestic paper mills that employ the same and old biocides as a means of microbial control, and microbiological control is often less recognized or even neglected. The right biocide selection for increased reductive environment of mills is critical for operation and estimated loss from paper quality defects such as sheet break, holes due to microbiological cause is tremendous compared to the microbiological control cost. It is imperative to investigate and diagnosis the environmental change of mills for right control of cumbersome microorganisms. Several useful diagnosis tools, including new technology employing OFM(Optical Fouling Monitor) in situ, are illustrated.

• Journal of Chest Surgery
• /
• v.5 no.2
• /
• pp.107-112
• /
• 1972

Recently we experienced a case of the portal hypertension, extrahepatlc origin in the National Medical Center, Seoul. The case was a male aged 19 who was undergone the elective splenorenal shunt with splenectomy 9 years ago and emergency ligation of the coronary vein because of recurred variceal rupture 6 years later and had recurring esophageal varices with bleeding this time.At the age of 10 he had been occasionally suffering from nasal bleeding and visited to our Pediatric department, when there was encountered for the first time the splenomegaly, esophageal varices in the lower third esophagus on the esophagogram, and stenosis and kinking of the portal vein with rich collateral circulation on the splenoportography without hepatic functional impairment.The elective splenorenal shunt with splenectomy was undergone under the diagnosis of portal hypertension due to congenital anomaly of the portal vein and postoperatlvely no troubles had been obtained until postoperative 1st attack of massive hematemesis due to esophagenl variceal rupture recurred about 6 years later which was confirmed by control esophagogram and it was resulted by stenosis of previous anastomotic site of the splenorenal shunt.Then emergency ligation of the coronary vein was only made for bleeding control and no episodes of hematemesis had been encountered thereafter until April 1972 about 3 years after the 2nd operation, when hematemesis recurred again. In this time, recurring esophageal varices were noted in the lower third esophagus on the control esophagogram and he was employed side to end mesocaval shunt as the final step of portal decompression,and following results were obtained. 1] No postoperatlve troubles as leg edema or pain: Postoperatively leg elevation and elastic bandage on the both legs were employed until discharge. 2] During operation the portal pressure was 300 mm $H_2O$ and immediately lowered to 170 mm $H_2O$ after shunt.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.207-215
• /
• 2000

Al films on cold-rolled steel sheet have been prepared by vacuum evaporation and arc-induced ion plating, respectively, and the evaporation rate and vapor distribution (thickness distribution over the substrate) have been investigated according to deposition conditions. The arc-induced ion plating (AIIP) method have been employed, which makes use of arc-like discharge current induced by ionization electrode located near the evaporation source. The AIIP takes advantage of high ionization rate compared with conventional ion plating, and can be carried out at low pressure of less than $10^{-4}$ torr. Very high evaporation rate of more than 2.0 mu\textrm{m}$/min could be achieved for Al evaporation using alumina liner by electron beam evaporation. The geometry factor n for the $cos^{n/\phi}$ vapor distribution, which affects the thickness distribution of films at the substrate turned out to be around 1 for vacuum evaporation, while it features around 2 or higher for ion plating. For the ion plated films, it has been found that the ionization condition and substrate bias are the main parameters to affect the thickness distribution of the films.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.576-580
• /
• 2006

Mercury-free lamp, external electrode fluorescent lamp (EEFL) which includes the xenon gas, is now going on the research for the replacement of mercury lamp. The densities of excited xenon atom in the $1s_4$ resonance state and the $1s_5$ metastable state are investigated in the EEFL by a laser absorption spectroscopy under various gas pressures. We have measured the absorption signals for both $1s_4$ resonance and the $1s_5$ metastable state in the EEFL by varying the discharge currents for a given pressure. This basic absorption characteristic is very important for improvement of the VUV luminous efficiency of the EEFL as well as plasma display panel.

• Journal of Korea Water Resources Association
• /
• v.39 no.1 s.162
• /
• pp.35-46
• /
• 2006

In this study, we proposed a layout of the integrated decision support system in order to prevent the contamination and to manage risk in water supply networks for safe and smooth water supply. We evaluated the priority of risk factors to detect anomaly in water supply networks using PROMETHEE and ANP techniques, which are applied to various Multi-Criteria Decision Making area in Europe and America. To develop the model, we selected pH, residual chlorine concentration, discharge, hydraulic pressure, electrical conductivity, turbidity, block leakage and water temperature as the key data item. We also chose pipe corrosion, pipe burst and water pollution in pipe as the criteria and then we present the results of PROMETHEE and ANP analysis. The evaluation results of the priority of risk factors in water supply networks will provide basic data to establish a contingency plan for accidents so that we can establish the specific emergency response procedures.

• 한국해양학회지
• /
• v.1
• /
• pp.49-55
• /
• 1971

After the heavy precipitation from April 1969 to September 1970, more than 1.359 10$\^$6/㎥ of fresh water was discharged through diversion channel of the Namgang Dam. The sands and muds in the northern Sachon Bay were moved and swept away by the strong southsard flow which was observed to be speedier than five knots. The shellfish culture facility as well as the oysters and bivalves were buried. In Sachon Bay, a southward surface ebb current of approximately one knot stratifies above the northward flow of approximately 0.5 knot, which seems to be similar to the salt wedge estuary. The stratified current is responsible for the breaking of the gill nets and other fishing gears. The salinity of sea water in Chinju Bay decreased remarkably and the abnormal low salinity water lower than 5 was distributed in Sachon Bay. The low salinity water front was observed in eastern Chinju Bay and the Samchonpo Channel, where the salinity was increased from 4.6 to approximately 30 within half a tidal cycle. These caused the oysters and bivalves die, and drove anchovies and octopus out to the sea and prevented them from approaching the bay. The decrease of salinity causes the decrease of density and osmotic pressure of sea water. Turbid water would prevent the sunlight from penetrate into deep layer.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.6
• /
• pp.391-396
• /
• 2007

Objective : This study was performed to review the clinical characteristics and operative results of brain abscess in order to define the therapeutic strategy for this disease. Methods : We reviewed the medical records and radiology images of brain abscess patients treated in our hospital during the last 16 years. A total of 35 cases included 23 males and 12 females, with the mean age of 48 years old. We excluded cases of postoperative, post traumatic, and fungal abscess. All patient underwent at least one surgical treatment such as stereotactic aspiration or craniotomy with excision. Results : Twenty seven [77.1%] patients presented with symptoms of increased intracranial pressure. The frontal lobe was the most common anatomical place, and streptococcal species were the most frequently encountered pathogens. The chronic pulmonary diseases and chronic otitis media are common underlying condition. Eighteen patients underwent stereotactic aspiration and 17 patients had excision of their abscess as an initial treatment. Seven patients had a repeated surgery, 6 of them had been treated with aspiration initially. At discharge, 60.0% patients showed a favorable outcome. Conclusion : The stereotactic drainage would be more suitable for the brain abscess located in deep and eloquent area. A large, solitary, and well-encapsulated lesion of superficial location could be best treated with complete excision, and this procedure was more definite because it is associated with less repeated surgery and showed more favorable outcome compared to aspiration surgery.

• Journal of Surface Science and Engineering
• /
• v.52 no.4
• /
• pp.194-202
• /
• 2019

A systematic investigation was made on the influence of processing parameters such as gas composition and treatment temperature on the surface characteristics of hardened layers of low temperature plasma nitrided 316L Austenitic Stainless Steel. Various nitriding processes were conducted by changing temperature ($370^{\circ}C$ to $430^{\circ}C$) and changing $N_2$ percentage (10% to 25%) for 15 hours in the glow discharge environment of a gas mixture of $N_2$ and $H_2$ in a plasma nitriding system. In this process a constant pressure of 4 Torr was maintained. Increasing nitriding temperature from $370^{\circ}C$ to $430^{\circ}C$, increases the thickness of S phase layer and the surface hardness, and also makes an improvement in corrosion resistance, irrespective of nitrogen percent. On the other hand, increasing nitrogen percent from 10% to 25% at $430^{\circ}C$ decreases corrosion resistance although it increases the surface hardness and the thickness of S phase layer. Therefore, optimized condition was selected as nitriding temperature of $430^{\circ}C$ with 10% nitrogen, as at this condition, the treated sample showed better corrosion resistance. Moreover to further increase the thickness of S phase layer and surface hardness without compromising the corrosion behavior, further research was conducted by fixing the $N_2$ content at 10% with introducing various amount of $CH_4$ content from 0% to 5% in the nitriding atmosphere. The best treatment condition was determined as 10% $N_2$ and 5% $CH_4$ content at $430^{\circ}C$, where the thickness of S phase layer of about $17{\mu}m$ and a surface hardness of $980HV_{0.1}$ were obtained (before treatment $250HV_{0.1}$ hardness). This specimen also showed much higher pitting potential, i.e. better corrosion resistance, than specimens treated at different process conditions and the untreated one.

• Journal of Surface Science and Engineering
• /
• v.54 no.6
• /
• pp.340-347
• /
• 2021

Among various metal oxide semiconductors, ZnO has an excellent electrical, optical properties with a wide bandgap of 3.3 eV. It can be applied as a photocatalytic material due to its high absorption rate along with physical and chemical stability to UV light. In addition, it is important to control the morphology of ZnO because the size and shape of the ZnO make difference in physical properties. In this paper, we demonstrate synthesis of size-controlled ZnO tetrapods using an atmospheric pressure plasma system. A micro-sized Zn spherical powder was continuously introduced in the plume of the atmospheric plasma jet ignited with mixture of oxygen and nitrogen. The effect of plasma power and collection sites on ZnO nanostructure was investigated. After the plasma discharge for 10 min, the produced materials deposited inside the 60-cm-long quartz tube were obtained with respect to the distance from the plume. According to the SEM analysis, all the synthesized nanoparticles were found to be ZnO tetrapods ranging from 100 to 600-nm-diameter depending on both applied power and collection site. The photocatalytic efficiency was evaluated by color change of methylene blue solution using UV-Vis spectroscopy. The photocatalytic activity increased with the increase of (101) and (100) plane in ZnO tetrapods, which is caused by enhanced chemical effects of plasma process.