• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.796-799
• /
• 2002

The stress of the rotating disc with several types of hole was investigated in detail in this paper. Maximum circumferential stress of rotating disc by changing hole shape with same area, were studied using FEM. The results obtained were as follows: 1. The disc which rotates at high speed is subjected to circumferential stress remarkably. 2. When the number of circular holes in rotating disc is four, stress reduction effect is maximum. 3. When shape of holes in rotating disc is cylindrical elongated hole, maximum circumferential stress of the rotating disc decreased most.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.283-288
• /
• 2011

The high heat resistant material for brake disc is required for higher speed trains. Although Aluminum is very expensive, it which has high thermal conductivity and low density has been adapted to high performance light-weight brake disc. In this study, we carry out the thermal stress analysis for suggested shape of Al hybrid brake disc which was designed to meet the optimal point between a performance and economic side. And we compare the results from the analysis to results of conventional disc at the same braking speed. The result show that the temperature on braking surface of Al hybrid disc is lower than the temperature on conventional disc surface, whereas the maximum thermal stress is larger than stress on conventional disc.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.127-132
• /
• 2010

Eigensolutions associated with self-excited vibration of disc brake system can be obtained by complex eigenvalue analysis. The eigenvalue sensitivity to change in contact stiffness can be used to demonstrate stability criteria and eigenvalue veering. Dynamic instability on eigenvalue loci with respect to the variation of contact stiffness is found to be related to mode interaction between two adjacent modes. This modal interaction can be effectively shown by mode shape visualization. This paper presents the methodology to construct the mode shape of disc brake system where a disc and two brake pads are coupled with contact stiffness.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.331-348
• /
• 1994

The purpose of this study was to investigate changes in the shape and ultrastructure of the articular disc of the rat mandibular joint with aging. Mechanical stress applied to the articular disc changes during neonatal, suckling, juvenile, adult and senile stages. Mandibular joints of 6 groups of rats(1-, 7-, 17-, 27-, 55-day and over-1-year groups) were removed en bloc and processed for light and electro microscopic study. The changes in the shape of articular disc were examined by light microscope in each group. Structural and ultrastructural changes in the articular disc were examined by light and electron microscope in each group. The results were as follows : In the 1-day and 7-day groups, the articular disc was long and slender in shape and the articular disc was not fitted with the shape of the mandibular fossa and condyle. However' after that time, the anterior and posterior portions of the articular disc were more bulged and the middle portion was shorter and biconcave. Thus the articular disc was well fitted with the shape of the mandibular fossa and condyle. The cell density decreased with aging. In the l -day and 7-day groups, the Golgi apparatus, rough endoplasmic reticulum and free ribosome, which are involved in the synthesis of intracellular and extracellular matrix, were developed. In the 17-day, 27-day and 55-day groups, not only the cell organelles involved in the synthesis of the intracellular and extracellular matrix but also the cell organelles involved in the remodeling of the extracellular matrix(i.e., finger-like cell process, lysosome and mitochondria)were well developed. With advancing age, intracytoplasmic microfilaments were more accumulated and condroid cells increased. In the over-1-year group, the majority of cells of the articular disc were chondroid cells. The majority of cytoplasmic compartment were filled with intracytoplasmic microfilaments and cell organelles were not developed. Therefore, metabolic activities of the cell was markedly reduced and cells contained structures enduring mechanical stress, and cells which were in the process of degeneration were observed occasionally.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1458-1467
• /
• 1996

A direct differentiationmethod is presented for the shape design sensitivity analysis of axisymmeetric elastic solids. Based on the exisymmetric boundary integralequaiton formulation, a new boundary ntegral equatio for sensitivity analysis is derived by taking meterial derivative to the same integral identity that was used in the adjoint variable melthod. Numerical implementation is performed to show the applicaiton of the theoretical formulation. For a simple example with analytic solution, the sensitivities by present method are compared with analytic sensitivities. As an application to the shape optimization, an optimal shape of a gas turbine disc toinimize the weight under stress constraints is found by incorporating the sensitivity analysis algorithm in an optimizatio program.

• Imaging Science in Dentistry
• /
• 제31권3호
• /
• pp.145-151
• /
• 2001

Purpose : To investigate the hypothesis that the morphology of the articular eminence of the temporomandibular joint is a predisposing factor for disc displacement. Materials and Methods: MR images of 126 temporomandibular joints in 94 patients were analyzed to assess for morphology of the articular eminence and disc displacement. The displaced disc was further categorized as disc displacement with reduction (DDWR) and disc displacement without reduction (DDWOR). The morphology of the articular eminence was classified into four types; box, sigmoid, flattened, and deformed. The relationship between the four types of shape of the articular eminence and the two types of disc position was assessed. Results: In the DDWR and DDWOR groups, the morphology of articular eminence were a box type in 40.5%, a sigmoid type in 30.2%, a flattened type in 24.6%, and a deformed type in 4.7%. The box type of the articular eminence were 34.3% in the DDWR group and 42.9% in the DDWOR group. The sigmoid type of the articular eminence were 34.3% in the DDWR group and 28.6% in the DDWOR group. The flattened type of the articular eminence were 28.6% in the DDWR group and 23.1 % in the DDWOR group. The deformed type of articular eminence were 2.9% in the DDWR group and 5.5% in the DDWOR group. Conclusion: Disc displacement is more likely to be found in the temporomandibular joints with a box-shaped articular eminence. It can be considered that shape of the articular eminence is related to the development of disc displacement.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.20-26
• /
• 2023

Lab-on-a-disc is a circular disc shape of cartridge that can be used for blood-based liquid biopsy to diagnose an early stage of cancer. Currently, liquid biopsies are regarded as a time-consuming process, and require sophisticated skills to precisely separate cell-free DNA (cfDNA) and circulating tumor cells (CTCs) floating in the bloodstream for accurate diagnosis. However, by applying the lab-on-a-disc to liquid biopsy, the entire process can be operated automatically. To do so, the lab-on-a-disc should be designed to prevent blood leakage during the centrifugation, transport, and dilution of blood inside the lab-on-a-disc in the process of liquid biopsy. In this study, the main components of lab-on-a-disc for liquid biopsy are fabricated by injection molding for mass production, and ultrasonic welding is employed to ensure the bonding strength between the components. To guarantee accurate ultrasonic welding, the flatness of the components is optimized numerically by using the response surface methodology with four main injection molding processing parameters, including the mold & resin temperatures, the injection speed, and the packing pressure. The 27 times finite element analyses using Moldflow® reveal that the injection time and the packing pressure are the critical factors affecting the flatness of the components with an optimal set of values for all four processing parameters. To further improve the flatness of the lab-on-a-disc components for stable mass production, a quarter-disc shape of lab-on-a-disc with a radius of 75 mm is used instead of a full circular shape of the disc, and this significantly decreases the standard deviation of flatness to 30% due to the reduced overall length of the injection molded components by one-half. Moreover, it is also beneficial to use a quarter disc shape to manage the deviation of flatness under 3 sigma limits.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.178-183
• /
• 2006

A Blu-ray disc, which has a more than 25GB optical capacity, has been known as a promising next-generation optical disc format. It commonly has a 1.1 mm thick substrate and a 0.1 mm thick cover layer for beam transmitting and the protection of the reflecting surface. The cover layer is generally formed by the spin coating process. However, in conventional spin coating, small bumps are formed along the rim of the disc, which results in the fatal reading error. Numerical simulation of the thin film flow behaviors during spin coating with the commercial solver and optimal spinning conditions was obtained. Thickness distribution of the cover layer according to the variation of substrate's edge shape could be calculated as well. By modifying the shape of the substrate edge shape, the bumps along the disc rim could be minimized, and it was proved that the chamfered edge, around $5{\sim}10$ degree, is the simplest and most effective way to minimize the bumps.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.225-235
• /
• 2013

TBM의 암반 굴착도구인 디스크커터의 작용력은 TBM의 설계와 굴진성능 평가를 위해 핵심적인 항목이다. 본 연구에서는 디스크커터 링의 형상에 따른 디스크커터 작용력의 차이를 실물 선형절삭실험에 의해 실험적으로 분석하였다. 또한 절삭실험 중에 발생하는 커터 링의 변형률을 계측하여 커터 링의 강성을 추정하였다. 분석결과, V형상의 디스크커터를 사용하게 되면 동일한 절삭조건에서 커터 관입깊이를 증가시킬 수는 있지만, 커터의 회전방향으로 큰 응력이 작용하는 것으로 나타났다. 또한 커터 작용력을 예측모델에 의해 추정할 경우에는, 디스크커터의 형상과 관련된 변수들을 고려할 수 있는 모델을 사용하는 것이 타당함을 알 수 있었다.

• 에너지공학
• /
• 제27권4호
• /
• pp.13-19
• /
• 2018

본 연구에서는 위상최적화에 기초한 발전설비용 버터플라이 밸브 디스크 부품의 경량설계가 수행되었다. 이때 상용 유한요소해석 소프트웨어가 사용되었으며 기존 상용 밸브 디스크의 외형을 유지시키면서 내부의 불필요 공간을 제거하여 경량구조를 갖도록 하였다. 먼저 밸브 디스크의 원판과 브라켓을 분리하여 각각 최적설계 하였다. 최적의 형상이 선정되면 이들을 조립하여 3차원 경량 밸브 디스크 모델을 완성하였다. 이후 이 모델에 설계 압력을 적용하여 유한요소해석 후 구조적 안전성을 확인하였다.