• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.23-27
• /
• 2007

Blu-ray disc 이후의 차세대 고밀도 광 기록 기술로 주목받는 홀로그래픽 데이터 스토리지 시스템을 설계, 제작하고 기록 재생 test 를 수행하였다. 시스템은 각도 다중화법을 채택하였고, 파장 405nm, NA 0.55 신호광 Fourier 변환 렌즈로 미디어에 defocus 하여 기록하였다. 1 page 용량은 raw bit 로 0.74Mbit 이고, SLM 과 CCD 의 over-sampling 비율은 1:1.5 가 되도록 구성하였다. 얻어진 raw 이미지는 위치 및 distortion 보상등의 신호처리 후, 70page 다중화 조건에서 bER $1{\times}10-2$ 수준으로 재생해 낼 수 있었다. 온도 변화에 의한 신호 열화를 보상하기 위해 External Cavity Tunable Blue LD 를 개발하여 온도 변화 $10^{\circ}C$까지 보상 가능함을 확인하였다.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.1
• /
• pp.7-13
• /
• 2014

The Blu-ray Disc Recordable(BD-R) is one of strong candidates for archival application among optical media formats, because of its large capability. However, the well-defined accelerated aging test conditions and evaluation criteria have not yet been fully confirmed for BD-R. In this study, the data stability and degradation aspect of BD-R were analyzed by the random-symbol error rate(R-SER) measurement after the accelerated aging test. And a reasonable test condition of accelerated aging for BD-R and the appropriate evaluation criterion using R-SER measurement were discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.813-819
• /
• 2006

The state of the art for the design of swing ann actuators for optical disc drives is to obtain the high efficient dynamic characteristics, especially for the small size for the mobile information devices, It is affected by the need of consumers who wants the portable digital storage devices maintaining highly functional and removable characteristics of the optical disk drive (ODD). As a necessary consequence, the need of the small form factor (SFF) storage device has been considered as an important part in the information storage technology. In this paper. we suggest a new conceptual miniaturized swing arm type actuator that has high efficient dynamic characteristics as well as satisfies the sensitivity and the heat emission requirements for the SFF-ODD. It also uses a tracking electromagnetic (EM) circuit for a focusing motion. Due to the size constraint, the thermal problem of optical head arises; therefore, we design an efficiently heat emitted structure for the actuator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.226-233
• /
• 2003

There are many researches going on to develop the information storage devices using Blue-ray disc and DVD as a demand for high-density information storage devices is highly increasing. This high-density information storage device requires a short-wave laser and objective lens of high numerical aperture set in fer its operation. And, that brings out rapid decrease of tilt tolerance. Therefore, it is necessary that an actuator should control tilt motions to get a stable signal. In this paper, a new mathematical form of 3-D.O.F coupled model is formulated and magnetic circuit in constraints is most effectively designed with the use of the moving coil type actuator in higher sensitivity. Further, this paper presents a tilt coil whose rotational center point is put on that of the lens through the variation of tilt coil and proposes a 3-axis actuator with high sensitivity improved in its dynamic property through its structure analysis.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.12-13
• /
• 2005

Near field recording (NFR) technology with SIL has been thought as the most promising generation optical storage device. A gap distance between the SIL and the disc should be controlled to be 20${\~}$40nm. We observed gap error signal in our NFR test-bed using a blue LD (405nm). The digital gap servo filter and control algorithm were developed to maintain a constant air gap by adopting a conventional actuator.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.23-29
• /
• 2019

Recently, use of composite materials has been increasing for body structures and chassis parts in the car industry because of weight reduction effect and excellent mechanical thermal characteristics. However, application of composite materials in brake system is very difficult because it is hard to obtain enough brake performance due to low heat storage capacity of the composite materials. In this paper, we will present new carbon ceramic composite disc with high flow characteristic. To obtain this characteristic, new vent structures were designed by using ARIZ method and substance-field model analysis. The flow effect of these vent structures on the brake performance was verified by pugh matrix and cooling test. The test results show improvement of cooling performance up to $30^{\circ}C$. Finally, These results will improve brake the reliability of the brake performance for the high performance vehicles and electric vehicles.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.326-330
• /
• 2000

Antimicrobial activities of marinex and preservative characteristics of soybean curds soaked in diluted marinex were investigated. One hundred ml of marinex showed antimicrobial activities against Streptococcus mutans, Bacillus subtilis, Pseudomonas aeruginosa, Salmonella typhimurium, Escherichia coli and Escherichia coli O-157 on a paper disc test. The growth of the microorganisms were inhibited with 200${\mu}{\ell}/m{\ell}$ of culture media. pH of soybean curd treated with marinex decreased to 1 day and then slowly increased as storage time increase, which was higher than control after 1 day of storage and lower after that time. Little difference was observed between control and marinex treated soybean curd in color. Hardness and chewiness of the treated sample were higher than those of the control. The numbers of E. coli and bacteria of the treated sample were lower than those of control during storage. The inhibition of the growth of E. coli and bacteria was dose dependent.

• Journal of Pharmacopuncture
• /
• v.6 no.2
• /
• pp.105-111
• /
• 2003

Objective : The purpose of this study was to investigate the stability of bee venom according to the keeping method and period. Method : The author observed microbial contamination of bee venom in nutrient agar, broth, YPD agar and YPD media and antibacterial activity for S. aureus, E. coli manufactured 12, 6 and 3 months ago as the two type of room temperature and $4^{\circ}C$ cold storage. Results : 1. 1:3,000 and 1:4,000 diluted bee venom solution did not show microbial contamination both room temperature and cold storage within twelve months. 2. There was antibacterial activity of diluted bee venom for S. aureus in cold storage within twelve months and there was no antibacterial activity of diluted bee venom for S. aureus in twelve months, room temperature storage. 3. We could not observe the zone of inhibition around paper disc of all for E.coli. in 1:3,000, 1:30,000 and 1:3,000,000 diluted bee venom solution, respectively. According to results, we expect that diluted bee venom solution is stable both cold and room temperature storage within twelve months.

• Transactions of the Society of Information Storage Systems
• /
• v.11 no.2
• /
• pp.31-35
• /
• 2015

The Blu-ray Disc Recordable-Triple Layer (BD-R TL) media is considered as one of strong candidates for archival application among optical media formats, due to its large capacity. However, the long-term stability and degradation aspect have not been fully understood yet for BD-R TL media. Thus, the BD-R TL media were recorded at full tracks and analyzed by the random-symbol error rate (R-SER) measurement at different recording layers and recording positions after the accelerated aging test to understand its long-term stability. Finally, the general degradation aspect of BD-R TL media was discussed to improve the long-term stability.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.3
• /
• pp.208-213
• /
• 2006

The present state of the design of swing arm actuators for optical disc drives is to obtain the high efficient dynamic characteristics within a very compact volume. As a necessary consequence, the need of the small form factor (SFF) storage device has been arisen as major interests in the information storage technology. In this paper, we suggest the miniaturized swing arm type actuator that has high efficient dynamic characteristics for SFF optical disk drive (ODD). For the operating mechanism, it uses a tracking electromagnetic (EM) circuit for a focusing motion together. Moreover, due to the size constraint, the thermal stability of optical head is important. Therefore, the actuator is designed to emit the heat, which is generated by optical pick-up, along the actuator body easily. Initial model is designed based on the topology optimization method considering the thermal conductivity. Then, the structural parts of the actuator are modified to maintain the high sensitivity and to have wide control bandwidth by the design of experiments method (DOE) and new concept of decreasing mass and inertia. Finally, a swing arm type actuator for SFF ODD is suggested and its dynamic characteristics are verified.