• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.116-130
• /
• 2019

In South Korea, forest fire occurrences are increasing in size and duration due to various factors such as the increase in fuel materials and frequent drying conditions in forests. Therefore, it is necessary to minimize the damage caused by forest fires by appropriately providing the probability of forest fire risk. The purpose of this study is to improve the Daily Weather Index(DWI) provided by the current forest fire forecasting system in South Korea. A new Fire Risk Index(FRI) is proposed in this study, which is provided in a 5km grid through the synergistic use of numerical weather forecast data, satellite-based drought indices, and forest fire-prone areas. The FRI is calculated based on the product of the Fine Fuel Moisture Code(FFMC) optimized for Korea, an integrated drought index, and spatio-temporal weighting approaches. In order to improve the temporal accuracy of forest fire risk, monthly weights were applied based on the forest fire occurrences by month. Similarly, spatial weights were applied using the forest fire density information to improve the spatial accuracy of forest fire risk. In the time series analysis of the number of monthly forest fires and the FRI, the relationship between the two were well simulated. In addition, it was possible to provide more spatially detailed information on forest fire risk when using FRI in the 5km grid than DWI based on administrative units. The research findings from this study can help make appropriate decisions before and after forest fire occurrences.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.2
• /
• pp.7-19
• /
• 2017

Recently, the incidence of disasters and safety incidents is increasing rapidly, and the interest and demands of the people are increasing. In particular, traffic accidents in Korea are decreasing due to the continuous efforts of the government and the local governments, but still higher than the OECD average. In response to such demands of the times, the 'Regional Safety Index', a numerical value that quantifies the level of safety of each local government, is being publicized every year to awaken public awareness. The Regional Safety Index covers seven categories of accidents (traffic accidents, crimes, suicide, infectious diseases, fire, safety accidents, and natural disasters) in local governments. But, this study focuses on the traffic accident area and analyzed. The target local government is Ulju county of Ulsan Metropolitan City. Based on the traffic accident statistical data of Ulju county, the analysis of the traffic accidents and vulnerable points were analyzed. Among them, 3 key improvement districts were selected and 15 vulnerable branches were selected for each key improvement district. Next, we prepared measures for improvement of each accident vulnerable site through analysis of geographic information through traffic data related to traffic accidents and interview with related organizations. In addition, the improvement measures are divided into the structural infrastructure improvement, the institutional improvement, and the traffic safety culture movement from the viewpoint of traffic accident prevention. Finally, the implications of this study are to clarify the duties and roles of the relevant departments in the municipality, based on the implementation schedule of the improvement projects for the prevention of traffic accidents and the budget plan. In addition, it is very important that the participating agencies involved in traffic accidents and the private sector participate in the project.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.43-53
• /
• 2018

Recently, public service for the improvement of quality of life and life support such as safety, aging, disaster, welfare, housing, economy, urban environment, traffic etc are actively developed based on open public data, and the spread of the network and the necessity of everyday life, smartphones are playing a role in providing public services. Currently, the development of science is changing the life expectancy of human beings and changing into social structure in which aged people become bigger due to various social conditions and low fertility and aging problems. However, the elderly who do not have easy access to information are very uncomfortable in dealing with mobile devices with very low accessibility and utilization of public services provided by mobile phones. Therefore, this study recategorizes the condition of the elderly presented in the previous study and identifies the problem through case analysis provided for the elderly. Also, we summarize the hierarchy of the core items of the existing interface design and derive it as an improvement index of the public service design for the improvement of the information accessibility of the elderly, and propose a design method to improve the utilization of the public service provided through the mobile device.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.269-277
• /
• 2007

Wireless sensor network system is expected to get high attention in research for now and future owing to the advanced hardware development technology and its various applicabilities. Among variety of sensor network systems, the seashore and marine sensor network, which are extended to get sampling of marine resources, environmental monitoring to prevent disaster and to be applied to the area of sea route guidance. For these marine applications to be available, however, the provision of precise location information of every sensor nodes is essential. In this paper, the sequential localization algorithm for obtaining the location information of marine sensor nodes. The sequential localization is done with the utilization of a small number of beacon nodes along the seashore and gets the location of nodes by controling the sequences of localization and also minimizes the error accumulation. The key idea of this algorithm for localization is that the localization priority of each sensor nodes is determined by the number of reference nodes' information. This sequential algorithm shows the improved error performance and also provide the increased coverage of marine sensor network by enabling the maximum localization of sensor nodes as possible.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.99-108
• /
• 2005

Interactive electronic technical manual(IETM) for construction projects means an electronic tool that regulations and specifications related to construction method or maintenance process ale described by electronic book type. It has a meaning of integrated information system that includes virtual reality(VR), 3D animation and image contents for representing real construction information so that user can easily understand the construction situation and maintenance process. The basic information and technical manuals of construction facilities are being written as paper documents in our construction industry. As the result, the information management in the maintenance phase of construction projects is inefficient, and maintenance cost is being increased. This study attempts to improve the lack of understanding about construction IETM through the analysis of necessity and unique function of construction IETM comparing with the IETMS in other industry, Finally, this study shows a scenario of construction IErM for mitigating natural disaster of construction facilities to verify applicability of IETM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.13-19
• /
• 2008

Time synchronization of nodes in sensor network synchronizes sensor nodes to one time clock. This is very essential in sensor networks so that the information collected and reported from the sensor nodes becomes meaningful. If sensor nodes are not synchronized, disaster report with time information can be wrong analyzed and this may lead to big calamity. With the limitation of battery and computing power, time synchronization algorithm imported in sensor nodes has to be as simple as it doesn't need big complexity, nor generates many synchronization messages. To reduce the synchronization error, hop count should be kept small between reference node to initiate synchronization and sensor nodes to be synchronized. Therefore, multiple reference nodes are used instead of single reference node. The use of multiple reference nodes introduce the requirement of synchronization among reference nodes in the network. Several algorithms have been proposed till now, but the synchronization among reference nodes are not well considered. This paper proposes improved time synchronization for sensor networks by synchronizing multiple reference nodes inside the network. Through simulation, we validated the effects of new algorithm.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.630-640
• /
• 2007

This paper presents the design of service model, transport channel, and service signaling for the Terrestrial DMB Automatic Emergency Alert Service (AEAS) Standard. The paper begins with the analysis of technical backgrounds related to the design topics. Next, the raper presents the design of service model for the AEAS. Since, unlike the regular T-DMB services, the AEAS is event-driven and common to all services, some problems have been identified to design a service model conforming to the T-DMB standard. So, the paper proposes a new concept, called the common service, and the AEAS is modeled using the common service. Next, in order to decide the transport channel for the alert information, the paper proposes to divide the alert information into the message which contains code/text-based essential information, and the supplemental multimedia information. Then, the paper tries to find the most efficient transport channels. Emergency Warning Service (EWS) which uses FIG 5/2 is selected for the delivery of the message. The paper proposes no constraints on delivery of supplemental information except that it shall use the MSC. Finally, it proposes the service signaling for the common service and transport channel. Due to the problems of conventional signaling using the MCI, it proposes a new signaling method. The paper will contribute as a guideline to the development for emergency alert service standards fur other broadcasting media.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.42-48
• /
• 2016

Inundation Maps are used to predict potential areas of flooding through the signs of past flooding and flood inundation analysis for flooding expected in the future, and this has led to the development of various forms of disaster-related services by governments. However, each institution has its own individual scenarios for making maps for spatial expression. Therefore, the type of spatial information is not standardized and has many forms and structures. In this study, we attempted to design the metadata that would allow Inundation Map information to be shared and used in various fields. The international standard, ISO 19115, and the domestic standards, KS X ISO 19115, TTAS.IS - 19115 and TTAS.KO - 10.0139/R1 of TTA, were used in the design to derive an appropriate standard for comparative analysis by dividing into maintenance, constraints, metadata, spatial reference system, identification, and distribution. It is expected that inundation maps will be easier to utilize and distribute among institutions and private companies by systematically collecting and managing them through the metadata design based vector space information standard developed in this study.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1389-1403
• /
• 2021

Disaster management using VHR (very high resolution) satellite images supports rapid damage assessment and also offers detailed information of the damages. However, the acquisition of pre-event VHR satellite images is usually limited due to the long revisit time of VHR satellites. The absence of the pre-event data can reduce the accuracy of damage assessment since it is difficult to distinguish the changed region from the unchanged region with only post-event data. To address this limitation, in this study, we conducted the wildfire-induced change detection on national wildfire cases using post-fire VHR satellite images and GIS (Geographic Information System) data. For GIS data, a national land cover map was selected to simulate the pre-fire NIR (near-infrared) images using the spatial information of the pre-fire land cover. Then, the simulated pre-fire NIR images were used to analyze bi-temporal NDVI (Normalized Difference Vegetation Index) correlation for unsupervised change detection. The whole process of change detection was performed on a superpixel basis considering the advantages of superpixels being able to reduce the complexity of the image processing while preserving the details of the VHR images. The proposed method was validated on the 2019 Gangwon wildfire cases and showed a high overall accuracy over 98% and a high F1-score over 0.97 for both study sites.