• 제목/요약/키워드: Dirichlet Condition

검색결과 156건 처리시간 0.028초

FINITE ELEMENT SOLUTIONS OF PARTIAL DIFFERENTIAL EQUATION WITH MULTIPLE CONCAVE CORNERS

  • Kim, Seokchan;Woo, Gyungsoo
    • 호남수학학술지
    • /
    • 제40권4호
    • /
    • pp.785-794
    • /
    • 2018
  • In [8] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities. They consider the Poisson equations with homogeneous Dirichlet boundary condition with one corner singularity at the origin, and compute the finite element solution using standard FEM and use the extraction formula to compute the stress intensity factor, then pose a PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor, which converges with optimal speed. From the solution they could get an accurate solution just by adding the singular part. This approach uses the polar coordinate and the cut-off function to control the singularity and the boundary condition. In this paper we consider Poisson equations with multiple singular points, which involves different cut-off functions which might overlaps together and shows the way of cording in FreeFEM++ to control the singular functions and cut-off functions with numerical experiments.

Aerodynamic Analysis of Helicopter Rotor by Using a Time-Domain Panel Method

  • Kim, J.K.;Lee, S.W.;Cho, J.S.
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년 영문 학술대회
    • /
    • pp.638-642
    • /
    • 2008
  • Computational methods based on the solution of the flow model are widely used for the analysis of lowspeed, inviscid, attached-flow problems. Most of such methods are based on the implementation of the internal Dirichlet boundary condition. In this paper, the time-domain panel method uses the piecewise constant source and doublet singularities. The present method utilizes the time-stepping loop to simulate the unsteady motion of the rotary wing blade. The wake geometry is calculated as part of the solution with no special treatment. To validate the results of aerodynamic characteristics, the typical blade was chosen such as, Caradonna-Tung blade and present results were compared with the experimental data and the other numerical results in the single blade condition and two blade condition. This isolated rotor blade model consisted of a two bladed rotor with untwisted, rectangular planform blade. Computed flow-field solutions were presented for various section of the blade in the hovering mode.

  • PDF

바닥판 콘크리트 타설순서에 따른 합성형교량의 거동해석 (Behavior of Composite Steel Bridges According to the Concrete Slab Casting Sequences)

  • 곽효경;서영재;정찬묵;박영하
    • 한국강구조학회 논문집
    • /
    • 제10권2호통권35호
    • /
    • pp.233-251
    • /
    • 1998
  • 이 논문은 바닥판 콘크리트 타설 순서에 따른 합성형 교량의 거동을 예측하는 내용을 다루고 있다. 교량의 시간의존적 거동을 묘사하기 위하여 Dirichlet 급수를 사용한 크리프 함수를 사용하였고 단면해석은 적층단면을 사용하였다. 교량의 거동은 단면의 형태와 타설순서의 변화 효과를 고려하여 바닥판 콘크리트 타설에 따른 교축 방향의 모멘트 변화로써 나타내었으며 이 결과들을 이용하여 현장에서 널리 사용되고 있는 폐단면강 box 거더의 연속 바닥판 타설의 적합성을 보이고 있다.

  • PDF

REMARKS ON FINITE ELEMENT METHODS FOR CORNER SINGULARITIES USING SIF

  • Kim, Seokchan;Kong, Soo Ryun
    • 호남수학학술지
    • /
    • 제38권3호
    • /
    • pp.661-674
    • /
    • 2016
  • In [15] they introduced a new finite element method for accurate numerical solutions of Poisson equations with corner singularities, which is useful for the problem with known stress intensity factor. They consider the Poisson equations with homogeneous Dirichlet boundary condition, compute the finite element solution using standard FEM and use the extraction formula to compute the stress intensity factor, then they pose a PDE with a regular solution by imposing the nonhomogeneous boundary condition using the computed stress intensity factor, which converges with optimal speed. From the solution we could get accurate solution just by adding the singular part. This approach works for the case when we have the accurate stress intensity factor. In this paper we consider Poisson equations with mixed boundary conditions and show the method depends the accrucy of the stress intensity factor by considering two algorithms.

NEGATIVE SOLUTION FOR THE SYSTEM OF THE NONLINEAR WAVE EQUATIONS WITH CRITICAL GROWTH

  • Jung, Tacksun;Choi, Q.-Heung
    • Korean Journal of Mathematics
    • /
    • 제16권1호
    • /
    • pp.41-49
    • /
    • 2008
  • We show the existence of a negative solution for the system of the following nonlinear wave equations with critical growth, under Dirichlet boundary condition and periodic condition $$u_{tt}-u_{xx}=au+b{\upsilon}+\frac{2{\alpha}}{{\alpha}+{\beta}}u_+^{\alpha-1}{\upsilon}_+^{\beta}+s{\phi}_{00}+f,\\{\upsilon}_{tt}-{\upsilon}_{xx}=cu+d{\upsilon}+\frac{2{\alpha}}{{\alpha}+{\beta}}u_+^{\alpha}{\upsilon}_+^{{\beta}-1}+t{\phi}_{00}+g,$$ where ${\alpha},{\beta}>1$ are real constants, $u_+={\max}\{u,0\},\;s,\;t{\in}R,\;{\phi}_{00}$ is the eigenfunction corresponding to the positive eigenvalue ${\lambda}_{00}$ of the wave operator and f, g are ${\pi}$-periodic, even in x and t and bounded functions.

  • PDF

경계요소법에 의한 유한폭 판재내의 원형 함유물과 균열의 상호간섭에 대한 연구 (A Study for Mutual Interference Between Circular Inclusion and Crack in Finite-Width Plate by Boundary Element Method)

  • 박성완
    • 대한기계학회논문집
    • /
    • 제18권6호
    • /
    • pp.1474-1482
    • /
    • 1994
  • In order to study the influence of a circular inclusion on a stress field neat a crack tip, mutual interference of a crack and the circular inclusion is analyzed by using the two dimensional boundary element method program made for the analysis of a bimaterial inclusion. The stress intensity factor of an inclusion which has small stiffness is a little greater than that of large stiffness in the near-by crack tip, and similar values tends to appear for distant crack tips. A line crack shows the repetition phenomena which caused by stress mutual interference depending on the radius and stiffness of an inclusion, and the repetition phenomena becoms weak in the inclusion which has large stiffness. Stress mutual interference shows repetition phenomena after extension of a line crack by the length of the radius of the inclusion which has small stiffness.

경계요소법에 있어서 수치적분에 관한 고찰 (Treatment of Numerical Integration for Boundary Element Method)

  • 박성완;곽창섭;구영덕
    • 한국정밀공학회지
    • /
    • 제13권2호
    • /
    • pp.185-193
    • /
    • 1996
  • Errors included in solutions obtained by the boundary element method are generally larger than those by the finite element method in the case that the number of discreted elements is small. One of the reasons is supposed to be attributed to the error which will be produced in the numerical integration of the singular functions in two dimensional elastic problem. Then, treatment of analytical integration to reduce computing time and to decrease errors of boundary element method are proposed.

  • PDF

MULTIPLE SOLUTIONS RESULT FOR THE MIXED TYPE NONLINEAR ELLIPTIC PROBLEM

  • Jung, Tacksun;Choi, Q-Heung
    • Korean Journal of Mathematics
    • /
    • 제19권4호
    • /
    • pp.423-436
    • /
    • 2011
  • We obtain a theorem that shows the existence of multiple solutions for the mixed type nonlinear elliptic equation with Dirichlet boundary condition. Here the nonlinear part contain the jumping nonlinearity and the subcritical growth nonlinearity. We first show the existence of a positive solution and next find the second nontrivial solution by applying the variational method and the mountain pass method in the critical point theory. By investigating that the functional I satisfies the mountain pass geometry we show the existence of at least two nontrivial solutions for the equation.

A FINITE ELEMENT METHOD USING SINGULAR FUNCTIONS FOR HELMHOLTZ EQUATIONS: PART I

  • Kim, Seok-Chan;Pyo, Jae-Hong;Lee, Jong-Sik
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제12권1호
    • /
    • pp.13-23
    • /
    • 2008
  • In [7, 8], they proposed a new singular function(NSF) method to compute singular solutions of Poisson equations on a polygonal domain with re-entrant angles. Singularities are eliminated and only the regular part of the solution that is in $H^2$ is computed. The stress intensity factor and the solution can be computed as a post processing step. This method was extended to the interface problem and Poisson equations with the mixed boundary condition. In this paper, we give NSF method for the Helmholtz equations ${\Delta}u+Ku=f$ with homogeneous Dirichlet boundary condition. Examples with a singular point are given with numerical results.

  • PDF

ROBUST AND ACCURATE METHOD FOR THE BLACK-SCHOLES EQUATIONS WITH PAYOFF-CONSISTENT EXTRAPOLATION

  • CHOI, YONGHO;JEONG, DARAE;KIM, JUNSEOK;KIM, YOUNG ROCK;LEE, SEUNGGYU;SEO, SEUNGSUK;YOO, MINHYUN
    • 대한수학회논문집
    • /
    • 제30권3호
    • /
    • pp.297-311
    • /
    • 2015
  • We present a robust and accurate boundary condition for pricing financial options that is a hybrid combination of the payoff-consistent extrapolation and the Dirichlet boundary conditions. The payoff-consistent extrapolation is an extrapolation which is based on the payoff profile. We apply the new hybrid boundary condition to the multi-dimensional Black-Scholes equations with a high correlation. Correlation terms in mixed derivatives make it more difficult to get stable numerical solutions. However, the proposed new boundary treatments guarantee the stability of the numerical solution with high correlation. To verify the excellence of the new boundary condition, we have several numerical tests such as higher dimensional problem and exotic option with nonlinear payoff. The numerical results demonstrate the robustness and accuracy of the proposed numerical scheme.